Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] iaxmodem & hylafax, call is not answered? (fwd)
Hi list!
I'm trying to setup iaxmodem and hylafax, both for the first time.
I downloaded iaxmodem and installed it according to the instructions. I guess
iaxmodem is setup correctly because I see it registering the extensions at the
server.
I installed hylafax 4.25 from rpm, used the (modified) example modem script
with iaxmodem and copied it to /var/spool/hylafax/etc
Then I first started iaxmodem, then i run 'faxgetty ttyIAX' from the
commandline. In my /var/log/messages I can see that faxgetty found ttyIAX
because of the iaxmodem specific stuff.
However on an incoming call I get this in my /varlog/iaxmodem/ttyIAX0 :
[2006-05-23 13:54:08] Registration completed successfully.
[2006-05-23 13:54:11] Unable to pass the full buffer onto the device file. 2015
bytes of 2052 written: Invalid argument
[2006-05-23 13:54:11] Unable to pass the full buffer onto the device file. -1
bytes of 4026 written: Resource temporarily unavailable
etc. etc. etc.
What did I miss? I did not put faxgetty in inittab yet neither did I do any
further configuration on inbound / outbound faxing.
These are my configs :
/etc/iaxmodem/ttyIAX0
device /dev/ttyIAX
owner uucp:uucp
mode 660
port 4570
refresh 300
server 127.0.0.1
peername 201
secret 1234
cidname Fax1
cidnumber 00000000000
codec alaw
/etc/iaxmodem/ttyIAX1
device /dev/ttyIAX
owner uucp:uucp
mode 660
port 4571
refresh 300
server 127.0.0.1
peername 202
secret 1234
cidname Fax2
cidnumber 0000000000
codec alaw
/var/spool/hylafax/etc/config.ttyIAX
DialStringRules: etc/dialrules.europe
ServerTracing: 0xFFF
SessionTracing: 0xFFF
RecvFileMode: 0600
LogFileMode: 0600
DeviceMode: 0600
RingsBeforeAnswer: 1
SpeakerVolume: off
GettyArgs: "-h %l dx_%s"
LocalIdentifier: "IAXmodem"
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "From %%l|%c|Page %%P of %%T"
MaxRecvPages: 200
ModemType: Class1 # use this to supply a hint
ModemResetCmds: "ATH1\nAT+VCID=1" # enables CallID display
ModemReadyCmds: ATH0
Class1AdaptRecvCmd: AT+FAR=1
Class1TMConnectDelay: 400 # counteract quick CONNECT response
Class1RMQueryCmd: "!24,48,72,96" # V.17 fast-train recv doesn't work
well
CallIDPattern: "NMBR="
CallIDPattern: "NAME="
CallIDPattern: "ANID="
CallIDPattern: "NDID="
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*