Re: [hylafax-users] Configure mainpine quattro+ on suse

["Support" <support@xxxxxxxxxxxx>]

You can find out what ttyS number was assigned to the first port of the
Mainpine board by running this from a command prompt:

wvdialconf modemtest

After you get the first ttyS#, you can proceed with the Mainpine
installation instructions located here:

http://www.mainpine.com/faqs/linux_ans/ans1_linux.htm

This will help you configure your rc.serial  file with the correct
setserial commands.

Note:  If you are running a Linux 2.6.x kernel version, you cannot add
the setserial line with the "set_multiport" setting.  Leave that last
line out when you are adding your configuration lines to the rc.serial
file.  That setting is not required for 2.6.x kernel systems.

If you still have problems, you may contact our support department
directly at support@xxxxxxxxxxxx .

Thank you,

Derrek Sypert
Mainpine, Inc. Support Manager
USA +1 718 701 2422 | Asia/Europe +44 1225 436137 
derrek.sypert@xxxxxxxxxxxx | www.mainpine.com

-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of joea
Sent: Friday, May 19, 2006 3:37 PM
To: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] Configure mainpine quattro+ on suse

So, muddling my way,  have defined the serial ports (as ttyS4-ttyS7),
but get a "UART unknown" when doing a "setserial".  The rest of the
output seems reasonable.

How can I tell it what the UART is.  And how would I know?

joea

joea<joea@xxxxxxxxxxxxxxx> Boldly Declared: 5/19/2006 5:54 PM:
> Need to configure mainpine quattro+ on sles 9 with hylafax 4.2.5
> 
> Found specifics for RH (geeky) and Fedora (magic).  YAST on Suse does 
> not seem to fit the bill, expect geekness to intrude.  Docs,
somewhere?
> 
> joea
> 
> ____________________ HylaFAX(tm) Users Mailing List 
> _______________________
>   To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < 
> /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail 
> sales@xxxxxxxxx*


____________________ HylaFAX(tm) Users Mailing List
_______________________
  To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
/dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*