Hello,
Here is the error :
>mo:2345:respawn:/usr/sbin/faxgetty ttyS0
>mo:2345:respawn:/usr/sbin/faxgetty ttyS1
mo or m0 is an Id and must be unique in the inittab
file.
I have 3 modems installed on a server and the lines begin
with m0, m1 and m2
>Do I need to have an active phone line connected
to the modem for it come in Running and Idle state?
No it will work and try to dial.
Raphael BUQUET
jraph@xxxxxxxxx
De :
hylafax-users-bounce@xxxxxxxxxxx [mailto:hylafax-users-bounce@xxxxxxxxxxx] De la part de Suraj Jadhav
Envoyé : vendredi 5 mai 2006
12:04
À : hylafax-users@xxxxxxxxxxx
Objet : [hylafax-users]
Unable to Add Second Modem
Hello,
I am using faxaddmodem to add second modem. First and Second modems are of same
make. faxaddmodem is detecting my modem and creating config file for the same
without any errors. If I use faxmodem ttyS1 it is detecting the modem and
showing it in faxstat also. But if I use faxmodem the fax queuing is getting
affected as in if one fax job is already running and some one submits one more
job the first job is stopped and second one is tried to be sent but that also
fails with job blocked error. I want to use faxq and want both the modems to be
configured. Please tell me how I achieve that. I did look for online
documentation for the same but no luck. I have included following lines in
inittab already -
mo:2345:respawn:/usr/sbin/faxgetty ttyS0
mo:2345:respawn:/usr/sbin/faxgetty ttyS1
Do I need to have an active phone line connected to the modem for it come in
Running and Idle state? Because I can see the ttyS0 file created in
var/spool/hylafax/status directory but I can not see ttyS1 there. How do I achieve
this without using faxmodem command?
Thanks & Regards
Suraj Jadhav
