[hylafax-users] my first question (sending problem with scanline missed)

To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] my first question (sending problem with scanline missed)
From: Antonio Pennino <antonio.pennino@xxxxxx>
Date: Thu, 04 May 2006 21:06:02 +0200

Hello,

I am not a new user (for Linux and hylafax question)
but it is the first time i use this mailinglist.

I have a analogic voice line and im using it for fax sending.
The OS is the latest DEBIAN stable version (sarge), with latestù
stable version of hylafax (4.2.1-5).

The identification string of my external faxmodem (con COM1 port) is:

                MODEM AGERE OCM V.92 VER2.7A (JUN 14 2004)
                VOICE MERCURY DP2SH MODE-II SERIAL

It is class1 only. It is new.

==PROBLEM:

In the most case the send is OK.

I have problem with a window-base fax server machine using a
3COM SPORTSTER 56k faxmodem. The problem is it: sending to it
is ok, the log is ok, the fax at the remote side show many
scanline missed.

If i use the -M option (sendfax ecc.) the problem is less and it is so many less if i increase the -M argument but also using -M 40ms some scanline are missed. This is only with this telno[fax server windows + 3com sportster], if a send on other destination at now have no problem (but it is not so big the number of possible test... if the server goes not on production there are only litte tests possibile; i send not the server at production state if i can not resolve this issue).

Please help me, sorry for my bad english.

This is my config:

...
PercentGoodLines:       95
MaxConsecutiveBadLines: 5
...

ModemType: Class1 # use this to supply a hint ModemFlowControl: xonxoff # XON/XOFF flow control assumed Class1Cmd: AT+FCLASS=1 # command to enter class 1 Class1PPMWaitCmd: AT+FTS=7 # command to stop and wait before PPM Class1TCFWaitCmd: AT+FTS=7 # command to stop and wait before TCF Class1EOPWaitCmd: AT+FTS=9 # command to stop and wait before EOP Class1MsgRecvHackCmd: "" # command to avoid +FCERROR before image Class1TCFResponseDelay: 75 # 75ms delay between recv TCF & response Class1SendMsgDelay: 200 # 75ms delay after training Class1SwitchingCmd: AT+FRS=7 # silence between HDLC recv and trans Class1TrainingRecovery: 1500 # 1.5sec delay after training failure Class1RecvAbortOK: 200 # wait 200ms for abort response Class1FrameOverhead: 4 # 4 byte overhead in recvd HDLC frames Class1RecvIdentTimer: 40000 # 35+5secs waiting for ident frames Class1TCFMaxNonZero: 10 # max 10% of data may be non-zero Class1TCFMinRun: 1000 # min run is 2/3rds of TCF duration

The entire log (one of many tests) is it:

mag 04 16:50:10.59: [26322]: SESSION BEGIN 000000107 <omissisì> mag 04 16:50:10.59: [26322]: HylaFAX (tm) Version 4.2.1 mag 04 16:50:10.59: [26322]: SEND FAX: JOB 72 DEST <omissis> COMMID 000000107 DEVICE '/dev/ttyS0' mag 04 16:50:10.59: [26322]: STATE CHANGE: RUNNING -> SENDING mag 04 16:50:10.59: [26322]: MODEM input buffering enabled mag 04 16:50:10.59: [26322]: <-- [12:AT+FCLASS=1\r] mag 04 16:50:10.70: [26322]: --> [2:OK] mag 04 16:50:10.70: [26322]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled mag 04 16:50:10.70: [26322]: DIAL <omissis> mag 04 16:50:10.70: [26322]: <-- [15:ATDT<omissis>\r] mag 04 16:50:29.65: [26322]: --> [7:CONNECT] mag 04 16:50:29.65: [26322]: MODEM input buffering disabled mag 04 16:50:31.26: [26322]: --> HDLC<25:FF C0 02 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 1E 86 62 51 CB> mag 04 16:50:31.26: [26322]: --> [2:OK] mag 04 16:50:31.26: [26322]: REMOTE CSI "Fax" mag 04 16:50:31.26: [26322]: <-- [9:AT+FRH=3\r] mag 04 16:50:31.28: [26322]: --> [7:CONNECT] mag 04 16:50:31.52: [26322]: --> HDLC<8:FF C8 01 00 73 1E 4C 84> mag 04 16:50:31.52: [26322]: --> [2:OK] mag 04 16:50:31.52: [26322]: REMOTE best rate 9600 bit/s mag 04 16:50:31.52: [26322]: REMOTE max A4 page width (215 mm) mag 04 16:50:31.52: [26322]: REMOTE max unlimited page length mag 04 16:50:31.52: [26322]: REMOTE best vres 7.7 line/mm mag 04 16:50:31.52: [26322]: REMOTE best format 2-D MR mag 04 16:50:31.52: [26322]: REMOTE best 0 ms/scanline mag 04 16:50:31.52: [26322]: USE 9600 bit/s mag 04 16:50:31.52: [26322]: USE 40 ms/scanline mag 04 16:50:31.52: [26322]: SEND file "docq/doc72.cover;40" mag 04 16:50:31.53: [26322]: USE A4 page width (215 mm) mag 04 16:50:31.53: [26322]: USE unlimited page length mag 04 16:50:31.53: [26322]: USE 3.85 line/mm mag 04 16:50:31.53: [26322]: USE 2-D MR mag 04 16:50:31.53: [26322]: SEND training at v.29 9600 bit/s mag 04 16:50:31.53: [26322]: <-- [9:AT+FTH=3\r] mag 04 16:50:32.39: [26322]: --> [7:CONNECT] mag 04 16:50:32.39: [26322]: <-- HDLC<23:FF C0 C2 94 E2 42 14 04 E6 76 96 2E 36 AE CE 76 F6 C2 04 B2 4C A2 04> mag 04 16:50:32.39: [26322]: <-- data [23] mag 04 16:50:32.39: [26322]: <-- data [2] mag 04 16:50:32.41: [26322]: --> [7:CONNECT] mag 04 16:50:32.41: [26322]: <-- HDLC<6:FF C8 C1 00 61 12> mag 04 16:50:32.41: [26322]: <-- data [6] mag 04 16:50:32.41: [26322]: <-- data [2] mag 04 16:50:33.52: [26322]: --> [2:OK] mag 04 16:50:33.52: [26322]: <-- [9:AT+FTS=7\r] mag 04 16:50:33.58: [26322]: --> [2:OK] mag 04 16:50:33.58: [26322]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled mag 04 16:50:33.58: [26322]: <-- [10:AT+FTM=96\r] mag 04 16:50:33.60: [26322]: --> [7:CONNECT] mag 04 16:50:33.60: [26322]: <-- data [1024] mag 04 16:50:33.60: [26322]: <-- data [776] mag 04 16:50:33.60: [26322]: <-- data [2] mag 04 16:50:35.38: [26322]: --> [2:OK] mag 04 16:50:35.38: [26322]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled mag 04 16:50:35.38: [26322]: <-- [9:AT+FRH=3\r] mag 04 16:50:35.67: [26322]: --> [7:CONNECT] mag 04 16:50:36.84: [26322]: --> HDLC<5:FF C8 21 57 BE> mag 04 16:50:36.84: [26322]: --> [2:OK] mag 04 16:50:36.84: [26322]: TRAINING succeeded mag 04 16:50:36.84: [26322]: DELAY 200 ms mag 04 16:50:37.04: [26322]: <-- [10:AT+FTM=96\r] mag 04 16:50:37.06: [26322]: --> [7:CONNECT] mag 04 16:50:37.06: [26322]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled mag 04 16:50:37.06: [26322]: SEND begin page mag 04 16:50:37.06: [26322]: <-- data [1029] mag 04 16:50:37.06: [26322]: <-- data [1024] mag 04 16:50:37.06: [26322]: <-- data [1024] mag 04 16:50:37.06: [26322]: <-- data [1024] mag 04 16:50:37.06: [26322]: <-- data [1024]

... many DATA rows ...

mag 04 16:51:03.01: [26322]: <-- data [1024] mag 04 16:51:05.00: [26322]: <-- data [718] mag 04 16:51:05.00: [26322]: SENT 54990 bytes of data mag 04 16:51:05.00: [26322]: <-- data [816] mag 04 16:51:05.00: [26322]: SENT 816 bytes of data mag 04 16:51:05.00: [26322]: SEND 2D RTC mag 04 16:51:05.00: [26322]: <-- data [30] mag 04 16:51:05.00: [26322]: <-- data [2] mag 04 16:51:05.00: [26322]: SEND end page mag 04 16:51:08.55: [26322]: --> [2:OK] mag 04 16:51:08.55: [26322]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled mag 04 16:51:08.55: [26322]: <-- [9:AT+FTS=7\r] mag 04 16:51:08.61: [26322]: --> [2:OK] mag 04 16:51:08.61: [26322]: SEND send MPS (more pages, same document) mag 04 16:51:08.61: [26322]: <-- [9:AT+FTH=3\r] mag 04 16:51:09.47: [26322]: --> [7:CONNECT] mag 04 16:51:09.47: [26322]: <-- HDLC<3:FF C8 F2> mag 04 16:51:09.47: [26322]: <-- data [3] mag 04 16:51:09.47: [26322]: <-- data [2] mag 04 16:51:09.79: [26322]: --> [2:OK] mag 04 16:51:09.79: [26322]: <-- [9:AT+FRH=3\r] mag 04 16:51:10.09: [26322]: --> [7:CONNECT] mag 04 16:51:11.25: [26322]: --> HDLC<5:FF C8 31 45 8F> mag 04 16:51:11.25: [26322]: --> [2:OK] mag 04 16:51:11.25: [26322]: SEND recv MCF (message confirmation) mag 04 16:51:11.26: [26322]: SEND FAX (000000107): FROM ... TO <omissis> (page 1 of 2 sent in 0:40) mag 04 16:51:11.26: [26322]: <-- [9:AT+FRS=7\r] mag 04 16:51:11.34: [26322]: --> [2:OK] mag 04 16:51:11.34: [26322]: SEND FAX (000000107): FROM ... TO <omissis> (docq/doc72.cover;40 sent in 0:40) mag 04 16:51:12.26: [26322]: SEND file "docq/doc94.ps;40" mag 04 16:51:12.26: [26322]: DELAY 200 ms mag 04 16:51:12.46: [26322]: <-- [10:AT+FTM=96\r] mag 04 16:51:12.47: [26322]: --> [7:CONNECT] mag 04 16:51:12.47: [26322]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled mag 04 16:51:12.47: [26322]: SEND begin page mag 04 16:51:12.48: [26322]: <-- data [1029] mag 04 16:51:12.48: [26322]: <-- data [1024] mag 04 16:51:12.48: [26322]: <-- data [1024] mag 04 16:51:12.48: [26322]: <-- data [1024]

...many data rows...

mag 04 16:51:28.44: [26322]: <-- data [1032] mag 04 16:51:30.44: [26322]: <-- data [1033] mag 04 16:51:30.44: [26322]: <-- data [940] mag 04 16:51:30.44: [26322]: SENT 36775 bytes of data mag 04 16:51:30.44: [26322]: SEND 2D RTC mag 04 16:51:30.44: [26322]: <-- data [30] mag 04 16:51:30.44: [26322]: <-- data [2] mag 04 16:51:30.44: [26322]: SEND end page mag 04 16:51:33.25: [26322]: --> [2:OK] mag 04 16:51:33.25: [26322]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled mag 04 16:51:33.25: [26322]: <-- [9:AT+FTS=9\r] mag 04 16:51:33.33: [26322]: --> [2:OK] mag 04 16:51:33.33: [26322]: SEND send EOP (no more pages or documents) mag 04 16:51:33.33: [26322]: <-- [9:AT+FTH=3\r] mag 04 16:51:34.20: [26322]: --> [7:CONNECT] mag 04 16:51:34.20: [26322]: <-- HDLC<3:FF C8 F4> mag 04 16:51:34.20: [26322]: <-- data [3] mag 04 16:51:34.20: [26322]: <-- data [2] mag 04 16:51:34.52: [26322]: --> [2:OK] mag 04 16:51:34.52: [26322]: <-- [9:AT+FRH=3\r] mag 04 16:51:34.82: [26322]: --> [7:CONNECT] mag 04 16:51:35.98: [26322]: --> HDLC<5:FF C8 31 45 8F> mag 04 16:51:35.99: [26322]: --> [2:OK] mag 04 16:51:35.99: [26322]: SEND recv MCF (message confirmation) mag 04 16:51:35.99: [26322]: SEND FAX (000000107): FROM ... TO <omissis> (page 2 of 2 sent in 0:23) mag 04 16:51:35.99: [26322]: <-- [9:AT+FRS=7\r] mag 04 16:51:36.07: [26322]: --> [2:OK] mag 04 16:51:36.07: [26322]: SEND FAX (000000107): FROM ... TO <omissis> (docq/doc94.ps;40 sent in 0:24) mag 04 16:51:36.99: [26322]: <-- [9:AT+FTH=3\r] mag 04 16:51:37.86: [26322]: --> [7:CONNECT] mag 04 16:51:37.86: [26322]: <-- HDLC<3:FF C8 DF> mag 04 16:51:37.86: [26322]: <-- data [3] mag 04 16:51:37.86: [26322]: <-- data [2] mag 04 16:51:38.18: [26322]: --> [2:OK] mag 04 16:51:38.18: [26322]: MODEM input buffering enabled mag 04 16:51:38.18: [26322]: <-- [5:ATH0\r] mag 04 16:51:38.97: [26322]: --> [2:OK] mag 04 16:51:38.97: [26322]: MODEM set DTR OFF mag 04 16:51:38.97: [26322]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5) mag 04 16:51:38.97: [26322]: SESSION END


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

Follow-Ups:
- Re: [hylafax-users] my first question (sending problem with scanline missed)
  - From: Lee Howard

Prev by Date: Re: [hylafax-users] (no subject)
Next by Date: [hylafax-users] HylaFax 4.2.5 SLES 9
Previous by thread: [hylafax-users] How do I recognize "this number has been disconnected..." from "busy"?
Next by thread: Re: [hylafax-users] my first question (sending problem with scanline missed)
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services