Re: [hylafax-users] Voice message - request of fax

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Anderson Alipio wrote:

> When hylafax dial to some other fax, it "ask" for the fax with a voice 
> message, eg: "Fax please" or some like that.
>
> does anyone know how to do it?


1. Make sure that you're using a fax+voice capable modem. (AT+FCLASS=? 
response should include "8" or "8.0".)

2. Install HylaFAX from http://hylafax.sourceforge.net. 4.3.0.2 will do 
fine.

3. Then use the <play:C> escape command. Here's what 'man 
hylafax-config' has to say about it:

The ‘‘<play:C>’’ escape can be used to play a raw audio file with a 
voice modem. The files are named
etc/playC.raw where ‘‘C’’ is any character. This feature can be used, 
for example, to play a brief audio
message after picking up the line but before answering. A configuration 
example may be:

ModemRingResponse: 
"AT+FCLASS=8;H1\nAT+VSM=131\nAT+VLS=1\nAT+VTX\n<waitfor:CONNECT><play:1><waitfor:OK>AT+VTS=[933,,150]"
ModemAnswerCmd: "<delay:100>AT+FCLASS=1;A"
CallIDPattern: SHIELDED_DTMF
CallIDAnswerLength: 4

In this example using an IS-101 voice-compliant modem, a RING indication 
from the modem will cause the modem
to be placed in voice mode, set ulaw audio compression, and via the 
connected phone line play back the
etc/play1.raw audio file, which may say, "After the tone enter a 
four-digit extension, then start the fax."
Following the message a tone is played.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*