|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] hylafax not receiving faxes
Hello,
I have installed hylafax-4.3.0.2-1 just today, can send out faxes just
fine but cannot receive faxes (with the default install).I've googled
for a lot of HOWTOs and FAQs regarding this problem but I was always
told that the default installation of HylaFAX sends an email with an
FTP link within its body. So far I haven't received any email even
though I can see that it was responding to a fax request:
May 1 21:23:27 localhost FaxGetty[27682]: ANSWER: FAX CONNECTION
DEVICE '/dev/ttyS4'
May 1 21:24:23 localhost FaxGetty[27682]: MODEM ZOOM V.90 PCI
I030100GV -H Z207 Zoom V.90 PCI I030100gV -H Z207/
Then after that, nothing happens. I've also tail'd /var/log/maillog
for any outgoing mail messages, there was none. There are no files in
/var/spool/hylafax/recvq also. Here's one of the files in
/var/spool/hylafax/log :
[root@localhost log]# cat c000000010
May 01 20:49:46.93: [27682]: SESSION BEGIN 000000010 13106983727
May 01 20:49:46.93: [27682]: HylaFAX (tm) Version 4.3.0.2
May 01 20:49:46.93: [27682]: <-- [4:ATA\r]
May 01 20:49:52.95: [27682]: --> [7:CONNECT]
May 01 20:49:52.95: [27682]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS4'
May 01 20:49:52.95: [27682]: RECV FAX: begin
May 01 20:49:52.95: [27682]: <-- data [34]
May 01 20:49:52.95: [27682]: <-- data [2]
May 01 20:49:52.96: [27682]: --> [7:CONNECT]
May 01 20:49:52.96: [27682]: <-- data [23]
May 01 20:49:52.96: [27682]: <-- data [2]
May 01 20:49:52.96: [27682]: --> [7:CONNECT]
May 01 20:49:52.96: [27682]: <-- data [13]
May 01 20:49:52.96: [27682]: <-- data [2]
May 01 20:49:55.25: [27682]: --> [2:OK]
May 01 20:49:55.25: [27682]: <-- [9:AT+FRH=3\r]
May 01 20:50:02.25: [27682]: --> [0:]
May 01 20:50:02.25: [27682]: MODEM <Empty line>
May 01 20:50:02.25: [27682]: <-- data [1]
May 01 20:50:02.25: [27682]: --> [2:]
May 01 20:50:02.25: [27682]: --> [2:OK]
May 01 20:50:02.25: [27682]: DELAY 1500 ms
May 01 20:50:03.75: [27682]: <-- [9:AT+FTH=3\r]
May 01 20:50:04.61: [27682]: --> [7:CONNECT]
May 01 20:50:04.61: [27682]: <-- data [34]
May 01 20:50:04.61: [27682]: <-- data [2]
May 01 20:50:04.61: [27682]: --> [7:CONNECT]
May 01 20:50:04.61: [27682]: <-- data [23]
May 01 20:50:04.61: [27682]: <-- data [2]
May 01 20:50:04.62: [27682]: --> [7:CONNECT]
May 01 20:50:04.62: [27682]: <-- data [13]
May 01 20:50:04.62: [27682]: <-- data [2]
May 01 20:50:06.90: [27682]: --> [2:OK]
May 01 20:50:06.90: [27682]: <-- [9:AT+FRH=3\r]
May 01 20:50:13.90: [27682]: --> [0:]
May 01 20:50:13.90: [27682]: MODEM <Empty line>
May 01 20:50:13.90: [27682]: <-- data [1]
May 01 20:50:13.90: [27682]: --> [2:]
May 01 20:50:13.90: [27682]: --> [2:OK]
May 01 20:50:13.90: [27682]: DELAY 1500 ms
May 01 20:50:15.40: [27682]: <-- [9:AT+FTH=3\r]
May 01 20:50:16.26: [27682]: --> [7:CONNECT]
May 01 20:50:16.26: [27682]: <-- data [34]
May 01 20:50:16.26: [27682]: <-- data [2]
May 01 20:50:16.27: [27682]: --> [7:CONNECT]
May 01 20:50:16.27: [27682]: <-- data [23]
May 01 20:50:16.27: [27682]: <-- data [2]
May 01 20:50:16.27: [27682]: --> [7:CONNECT]
May 01 20:50:16.27: [27682]: <-- data [13]
May 01 20:50:16.27: [27682]: <-- data [2]
May 01 20:50:18.55: [27682]: --> [2:OK]
May 01 20:50:18.55: [27682]: <-- [9:AT+FRH=3\r]
May 01 20:50:19.18: [27682]: --> [7:CONNECT]
May 01 20:50:20.03: [27682]: --> [2:OK]
May 01 20:50:20.03: [27682]: HDLC frame too short (0 bytes)
May 01 20:50:20.03: [27682]: <-- [9:AT+FRS=7\r]
May 01 20:50:23.19: [27682]: --> [2:OK]
May 01 20:50:23.19: [27682]: <-- [9:AT+FTH=3\r]
May 01 20:50:24.04: [27682]: --> [7:CONNECT]
May 01 20:50:24.04: [27682]: <-- data [3]
May 01 20:50:24.04: [27682]: <-- data [2]
May 01 20:50:24.36: [27682]: --> [2:OK]
May 01 20:50:24.36: [27682]: RECV send CRP (command repeat)
May 01 20:50:24.36: [27682]: <-- [9:AT+FRH=3\r]
May 01 20:50:31.36: [27682]: --> [0:]
May 01 20:50:31.36: [27682]: MODEM <Empty line>
May 01 20:50:31.36: [27682]: <-- data [1]
May 01 20:50:31.37: [27682]: --> [2:]
May 01 20:50:31.37: [27682]: --> [2:OK]
May 01 20:50:31.37: [27682]: RECV FAX: No answer (T.30 T1 timeout)
May 01 20:50:31.37: [27682]: RECV FAX: end
May 01 20:50:31.37: [27682]: SESSION END
[root@localhost log]#
Any pointers? Thanks in advance..
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
