|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] MODEM OLITEC SPEED'COM 2000 V2 56000 V2.424DS/ : no send fax : in class2 MODEM CONEXANT AC/K56/OLITEC SMART MEMORY v424s
- To: "'2JS'" <2js@xxxxxxxxxx>, hylafax-users@xxxxxxxxxxx
- Subject: Re: [hylafax-users] MODEM OLITEC SPEED'COM 2000 V2 56000 V2.424DS/ : no send fax : in class2 MODEM CONEXANT AC/K56/OLITEC SMART MEMORY v424s
- From: 2JS <2js@xxxxxxxxxx>
- Date: Sun, 16 Apr 2006 18:22:42 +0200
With class 2, i arrive to send:
#
#
# Modem-related stuff: should reflect modem command interface # and hardware
connection/cabling (e.g. flow control).
#
ModemType: Class2 # use class 2 interface
ModemRate: 19200
ModemFlowControl: xonxoff # default
ModemWaitForConnect: yes # wait for CONNECT on answer
#
#ModemResetCmds: AT&F2 # what you want for a Supra
ModemNoFlowCmd: AT&K # disable flow control cmd
ModemHardFlowCmd: AT&K3 # hardware flow control cmd
ModemSoftFlowCmd: AT&K4 # software flow control cmd
ModemSetupDTRCmd: AT&D3 # DTR off causes modem to reset
ModemSetupDCDCmd: AT&C1 # DCD follows carrier
ModemSetupAACmd: AT+FCLASS=0;+FAA=1 # enable in class 0
#
ModemSendFillOrder: LSB2MSB # as expected
ModemRecvFillOrder: MSB2LSB # opposite of what makes sense
Class2RecvDataTrigger: "\022" # a la 2388-B
-----Message d'origine-----
De : hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] De la part de 2JS Envoyé :
dimanche 16 avril 2006 18:00 À : hylafax-users@xxxxxxxxxxx Objet :
[hylafax-users] MODEM OLITEC SPEED'COM 2000 V2 56000 V2.424DS/ : no send fax
Importance : Haute
Hi,
This is my probleme.
Regards,
JJ
[root@localhost log]# more c000000003
avr 16 17:22:13.70: [ 4913]: SESSION BEGIN 000000003 33491081727 avr 16
17:22:13.70: [ 4913]: HylaFAX (tm) Version 4.2.5.5 avr 16 17:22:13.70: [
4913]: SEND FAX: JOB 2 DEST 0491aabbcc COMMID
000000003 DEVICE '/dev/ttyS1' FROM 'root <root@xxxxxxxxxxxxxxxxxxxxx>' USER
root avr 16 17:22:13.70: [ 4913]: <-- [12:AT+FCLASS=1\r] avr 16 17:22:13.71:
[ 4913]: --> [2:OK] avr 16 17:22:13.71: [ 4913]: DIAL 0491aabbcc avr 16
17:22:13.71: [ 4913]: <-- [15:ATDT0491aabbcc\r] avr 16 17:22:32.54: [ 4913]:
--> [7:CONNECT] avr 16 17:22:34.34: [ 4913]: --> [2:OK] avr 16 17:22:34.34:
[ 4913]: REMOTE NSF "00 00 11 80 00 8A 49 10 54 4F 4E 55
53 20 49 4E 54 45 52 20 20 20 20 20 00 73 00 80 80 80 02 01 01"
avr 16 17:22:34.34: [ 4913]: NSF remote fax equipment: Canon Laser Class
9000 Series
avr 16 17:22:34.34: [ 4913]: NSF remote station ID: "PIPO "
avr 16 17:22:34.34: [ 4913]: <-- [9:AT+FRH=3\r] avr 16 17:22:34.35: [ 4913]:
--> [7:CONNECT] avr 16 17:22:35.06: [ 4913]: --> [2:OK] avr 16 17:22:35.06:
[ 4913]: REMOTE CSI "0491aabbcc"
avr 16 17:22:35.06: [ 4913]: <-- [9:AT+FRH=3\r] avr 16 17:22:35.07: [ 4913]:
--> [7:CONNECT] avr 16 17:22:35.41: [ 4913]: --> [2:OK] avr 16 17:22:35.41:
[ 4913]: REMOTE best rate 14400 bit/s avr 16 17:22:35.41: [ 4913]: REMOTE
max A4 page width (215 mm) avr 16 17:22:35.41: [ 4913]: REMOTE max unlimited
page length avr 16 17:22:35.41: [ 4913]: REMOTE best vres 15.4 line/mm avr
16 17:22:35.41: [ 4913]: REMOTE format support: MH, MR, MMR avr 16
17:22:35.41: [ 4913]: REMOTE supports T.30 Annex A, 256-byte ECM avr 16
17:22:35.41: [ 4913]: REMOTE best 10 ms/scanline avr 16 17:22:35.41: [
4913]: USE 14400 bit/s avr 16 17:22:35.41: [ 4913]: USE error correction
mode avr 16 17:22:35.41: [ 4913]: SEND file "docq/doc2.ps;c1"
avr 16 17:22:35.41: [ 4913]: USE A4 page width (215 mm) avr 16 17:22:35.41:
[ 4913]: USE unlimited page length avr 16 17:22:35.41: [ 4913]: USE 7.7
line/mm avr 16 17:22:35.41: [ 4913]: USE 2-D MMR avr 16 17:22:35.41: [
4913]: USE 0 ms/scanline avr 16 17:22:35.41: [ 4913]: SEND training at v.17
14400 bit/s avr 16 17:22:35.41: [ 4913]: <-- [9:AT+FRS=7\r] avr 16
17:22:35.53: [ 4913]: --> [2:OK] avr 16 17:22:35.53: [ 4913]: <--
[9:AT+FTH=3\r] avr 16 17:22:35.58: [ 4913]: --> [7:CONNECT] avr 16
17:22:35.58: [ 4913]: <-- data [23] avr 16 17:22:35.58: [ 4913]: <-- data
[2] avr 16 17:22:37.36: [ 4913]: --> [7:CONNECT] avr 16 17:22:37.36: [
4913]: <-- data [7] avr 16 17:22:37.36: [ 4913]: <-- data [2] avr 16
17:22:37.83: [ 4913]: --> [2:OK] avr 16 17:22:37.83: [ 4913]: <--
[9:AT+FTS=7\r] avr 16 17:22:37.92: [ 4913]: --> [2:OK] avr 16 17:22:37.92: [
4913]: <-- [11:AT+FTM=145\r] avr 16 17:22:37.99: [ 4913]: --> [7:CONNECT]
avr 16 17:22:37.99: [ 4913]: <-- data [1024] avr 16 17:22:38.38: [ 4913]:
<-- data [1024] avr 16 17:22:39.58: [ 4913]: <-- data [652] [root@localhost
log]#
ModemType: Class1 # use this to supply a hint
#ModemRate: 19200 # rate for DCE-DTE communication
#ModemFlowControl: xonxoff # XON/XOFF flow control assumed
#
#ModemSetupDTRCmd: AT&D2 # setup so DTR drop resets modem
#ModemSetupDCDCmd: AT&C1 # setup so DCD follows carrier
#GettyArgs: "-h %l dx_%s" # modem must auto-detect fax/data
#
# We can append the "@" symbol to the dial string so that # the modem will
wait 5 seconds before attempting to connect # and return result codes that
distinguish between no carrier # and no answer. This makes it possible to
avoid problems with # repeatedly dialing a number that doesn't have a fax
machine # (kudos to Stuart Lynne for this trick.) # # NB: If you need to
prefix phone numbers to get through a PBX,
# put it in the ModemDialCmd; e.g. "DT9%s@".
#
#ModemDialCmd: ATDT%s # T for tone dialing
#
# Other possible configuration stuff. The default strings are # shown
below. Only those that are different from the defaults # need to be
included in the configuration file.
#
#ModemResetCmds: "" # stuff to do when modem is
reset
#ModemAnswerCmd: ATA # use this to answer phone
#ModemNoFlowCmd: AT&K0 # disable flow control cmd
#ModemHardFlowCmd: AT&K3 # hardware flow control cmd
#ModemSoftFlowCmd: AT&K4 # software flow control cmd
#ModemNoAutoAnswerCmd: ATS0=0 # disable auto-answer
#
# Set modem speaker volume commands: OFF QUIET LOW MEDIUM HIGH.
# Note that we both turn the speaker on/off and set volume.
#
#ModemSetVolumeCmd: "ATM0 ATL0M1 ATL1M1 ATL2M1 ATL3M1"
#ModemEchoOffCmd: ATE0 # disable command echo
#ModemVerboseResultsCmd: ATV1 # enable verbose command
results
#ModemResultCodesCmd: ATQ0 # enable result codes
#ModemOnHookCmd: ATH0 # place phone on hook
(hangup)
#ModemSoftResetCmd: ATZ # do soft reset of modem
#ModemSoftResetCmdDelay: 3000 # pause after soft reset
#ModemWaitTimeCmd: ATS7=60 # wait 60 seconds for carrier
#ModemCommaPauseTimeCmd: ATS8=2 # comma pause time is 2
seconds
#ModemRecvFillOrder: LSB2MSB # bit order of received facsimile
#ModemSendFillOrder: LSB2MSB # bit order modem expects for
transmit
#
Class1Cmd: AT+FCLASS=1 # command to enter class 1
Class1PPMWaitCmd: AT+FTS=7 # command to stop and wait before
PPM
Class1TCFWaitCmd: AT+FTS=7 # command to stop and wait before
TCF
Class1EOPWaitCmd: AT+FTS=9 # command to stop and wait before
EOP
Class1SwitchingCmd: AT+FRS=7 # silence between HDLC recv and
trans
Class1TrainingRecovery: 1500 # 1.5sec delay after training
failure
Class1RecvAbortOK: 200 # wait 200ms for abort response
Class1FrameOverhead: 4 # 4 byte overhead in recvd HDLC
frames
Class1RecvIdentTimer: 40000 # 35+5secs waiting for ident frames
Class1TCFMaxNonZero: 10 # max 10% of data may be non-zero
Class1TCFMinRun: 1000 # min run is 2/3rds of TCF duration
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
