[hylafax-users] disconnection problem

["Federico Zanini - Digitel s.n.c." <federico@xxxxxxxxxxxxxx>]

Hi All,
I'm using WHFC client to send faxes from my windows machine by means of
hylafax-server ver. 4.2.1 on debian server

When my fax-modem calls remote machine , it answer back estabilishes the
connection but line drops immediately.
Here is log from hylafax-server: (0422xxxxxx was called number) :




Your facsimile job to xxxxxx failed because:
    <no reason recorded>

    ---- Transcript of session follows ----

mar 28 17:50:33.09: [14281]: SESSION BEGIN 000001399 394220422xxxxxx
mar 28 17:50:33.09: [14281]: HylaFAX (tm) Version 4.2.1
mar 28 17:50:33.09: [14281]: SEND FAX: JOB 8 DEST 0422xxxxxx COMMID
000001399 DEVICE '/dev/ttyS1'
mar 28 17:50:33.09: [14281]: <-- [12:AT+FCLASS=1\r]
mar 28 17:50:33.30: [14281]: --> [2:OK]
mar 28 17:50:33.31: [14281]: DIAL 0422xxxxxx
mar 28 17:50:33.31: [14281]: <-- [15:ATDT0422xxxxxx\r]
mar 28 17:50:47.11: [14281]: --> [7:CONNECT]
mar 28 17:50:49.42: [14281]: --> [2:OK]
mar 28 17:50:49.43: [14281]: REMOTE NSF "00 00 56 55 55 00 8C 90 80 61 01"
mar 28 17:50:49.43: [14281]: NSF remote fax equipment: Brother
mar 28 17:50:49.43: [14281]: <-- [9:AT+FRH=3\r]
mar 28 17:50:49.44: [14281]: --> [7:CONNECT]
mar 28 17:50:49.46: [14281]: --> [2:OK]
mar 28 17:50:49.46: [14281]: REMOTE CSI "0422 xxxxxx"
mar 28 17:50:49.47: [14281]: <-- [9:AT+FRH=3\r]
mar 28 17:50:49.48: [14281]: --> [7:CONNECT]
mar 28 17:50:49.49: [14281]: --> [2:OK]
mar 28 17:50:49.50: [14281]: REMOTE best rate 14400 bit/s
mar 28 17:50:49.50: [14281]: REMOTE max A4 page width (215 mm)
mar 28 17:50:49.50: [14281]: REMOTE max unlimited page length
mar 28 17:50:49.50: [14281]: REMOTE best vres 15.4 line/mm
mar 28 17:50:49.50: [14281]: REMOTE best format 2-D MMR
mar 28 17:50:49.50: [14281]: REMOTE supports T.30 Annex A, 256-byte ECM
mar 28 17:50:49.50: [14281]: REMOTE best 10 ms/scanline
mar 28 17:50:49.50: [14281]: USE 14400 bit/s
mar 28 17:50:49.50: [14281]: USE error correction mode
mar 28 17:50:49.50: [14281]: USE 0 ms/scanline
mar 28 17:50:49.50: [14281]: <-- [9:AT+FTH=3\r]
mar 28 17:50:49.54: [14281]: --> [7:CONNECT]
mar 28 17:50:50.86: [14281]: --> [2:OK]
mar 28 17:50:50.87: [14281]: <-- [5:ATH0\r]
mar 28 17:50:51.29: [14281]: --> [10:NO CARRIER]
mar 28 17:50:51.30: [14281]: MODEM No carrier
mar 28 17:50:51.30: [14281]: SESSION END

    ---- Unsent job status ----

   Destination: 0422xxxxxx
         JobID: 8
       GroupID: 8
        Sender: Federico
      Mailaddr: fzanini
        CommID: 000001399
Submitted From: 10.0.0.6
    Page Width: 194 (mm)
   Page Length: 281 (mm)
    Resolution: 98 (lpi)
        Status:   (nothing available)
       Dialogs: 1 (exchanges with remote device)
         Dials: 0 (consecutive failed calls to destination)
         Calls: 1 (total phone calls placed)
         Pages: 0 (pages transmitted)
      TotPages: 0 (total pages to transmit)
      Attempts: 0 (attempts to send current page)
        Dirnum: 0 (directory of next page to send)

    ---- Documents submitted for transmission ----

The following documents were submitted for transmission and are
available on the server for reuse until they are automatically
purged when this job is removed.  Documents may also be manually
removed using the faxrm command; consult faxrm(1) for information.

Filename                 Size Type
docq/doc8.ps.8         465060 Unknown document type







ANY IDEA ???

Thanks , Federico


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*