[hylafax-users] Attachment error

["OLCESE, Marcelo Oscar" <molcese@xxxxxxxxxxxx>]

Buenos días,

Instalé HYLAFAX 4.2.5 en RedHat 9.

Recibo el fax sin ningun problema. Lo veo en  /var/spool/hylafax/recvq/ en formato TIF, pero cuando lo envío a una cuenta de email llega con tamaño 0(cero).

Me pasa lo mismo con formato PDF. La unica forma que llegue es como PS.

Este es el log:

 

mar 23 11:30:05.28: [ 2227]: SESSION BEGIN 000000045 541143420851
mar 23 11:30:05.29: [ 2227]: HylaFAX (tm) Version 4.2.5
mar 23 11:30:05.29: [ 2227]: <-- [13:AT+FCLASS=1A\r]
mar 23 11:30:10.47: [ 2227]: --> [7:CONNECT]
mar 23 11:30:10.47: [ 2227]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
mar 23 11:30:10.47: [ 2227]: RECV FAX: begin
mar 23 11:30:10.48: [ 2227]: <-- data [32]
mar 23 11:30:10.48: [ 2227]: <-- data [2]
mar 23 11:30:10.64: [ 2227]: --> [7:CONNECT]
mar 23 11:30:10.64: [ 2227]: <-- data [23]
mar 23 11:30:10.64: [ 2227]: <-- data [2]
mar 23 11:30:11.36: [ 2227]: --> [7:CONNECT]
mar 23 11:30:11.36: [ 2227]: <-- data [13]
mar 23 11:30:11.36: [ 2227]: <-- data [2]
mar 23 11:30:13.62: [ 2227]: --> [2:OK]
mar 23 11:30:13.62: [ 2227]: <-- [9:AT+FRH=3\r]
mar 23 11:30:14.36: [ 2227]: --> [7:CONNECT]
mar 23 11:30:15.93: [ 2227]: --> [2:OK]
mar 23 11:30:15.93: [ 2227]: REMOTE TSI "54 1 331 7631"
mar 23 11:30:15.93: [ 2227]: <-- [9:AT+FRH=3\r]
mar 23 11:30:15.95: [ 2227]: --> [7:CONNECT]
mar 23 11:30:16.27: [ 2227]: --> [2:OK]
mar 23 11:30:16.27: [ 2227]: REMOTE wants 9600 bit/s
mar 23 11:30:16.27: [ 2227]: REMOTE wants A4 page width (215 mm)
mar 23 11:30:16.27: [ 2227]: REMOTE wants unlimited page length
mar 23 11:30:16.27: [ 2227]: REMOTE wants 3.85 line/mm
mar 23 11:30:16.27: [ 2227]: REMOTE wants 2-D MR
mar 23 11:30:16.27: [ 2227]: RECV training at v.29 9600 bit/s
mar 23 11:30:16.27: [ 2227]: <-- [10:AT+FRM=96\r]
mar 23 11:30:16.82: [ 2227]: --> [7:CONNECT]
mar 23 11:30:18.39: [ 2227]: RECV: TCF 1893 bytes, 4% non-zero, 1800 zero-run
mar 23 11:30:18.39: [ 2227]: --> [10:NO CARRIER]
mar 23 11:30:18.39: [ 2227]: DELAY 70 ms
mar 23 11:30:18.46: [ 2227]: TRAINING succeeded
mar 23 11:30:18.47: [ 2227]: <-- [9:AT+FTH=3\r]
mar 23 11:30:18.66: [ 2227]: --> [7:CONNECT]
mar 23 11:30:18.66: [ 2227]: <-- data [3]
mar 23 11:30:18.66: [ 2227]: <-- data [2]
mar 23 11:30:19.84: [ 2227]: --> [2:OK]
mar 23 11:30:19.84: [ 2227]: <-- [10:AT+FRM=96\r]
mar 23 11:30:20.52: [ 2227]: --> [7:CONNECT]
mar 23 11:30:20.52: [ 2227]: RECV: begin page
mar 23 11:30:35.19: [ 2227]: RECV: 1430 total lines, 0 bad lines, 0 consecutive bad lines
mar 23 11:30:35.19: [ 2227]: RECV: end page
mar 23 11:30:35.19: [ 2227]: --> [10:NO CARRIER]
mar 23 11:30:35.19: [ 2227]: <-- [9:AT+FRH=3\r]
mar 23 11:30:35.71: [ 2227]: --> [7:CONNECT]
mar 23 11:30:36.51: [ 2227]: --> [2:OK]
mar 23 11:30:36.51: [ 2227]: RECV recv EOP (no more pages or documents)
mar 23 11:30:36.51: [ 2227]: DELAY 70 ms
mar 23 11:30:36.59: [ 2227]: <-- [9:AT+FTH=3\r]
mar 23 11:30:36.88: [ 2227]: --> [7:CONNECT]
mar 23 11:30:36.88: [ 2227]: <-- data [3]
mar 23 11:30:36.88: [ 2227]: <-- data [2]
mar 23 11:30:38.06: [ 2227]: --> [2:OK]
mar 23 11:30:38.06: [ 2227]: RECV send MCF (message confirmation)
mar 23 11:30:38.07: [ 2227]: RECV FAX (000000045): from 54 1 331 7631, page 1 in 0:25, INF, 3.85 line/mm, 2-D MR, 9600 bit/s
mar 23 11:30:38.07: [ 2227]: RECV FAX (000000045): recvq/fax000000045.tif from 54 1 331 7631, route to <unspecified>, 1 pages in 0:28
mar 23 11:30:38.07: [ 2227]: <-- [9:AT+FRH=3\r]
mar 23 11:30:38.91: [ 2227]: --> [7:CONNECT]
mar 23 11:30:39.84: [ 2227]: --> [2:OK]
mar 23 11:30:39.84: [ 2227]: RECV recv DCN (disconnect)
mar 23 11:30:39.84: [ 2227]: RECV FAX: bin/faxrcvd "recvq/fax000000045.tif" "ttyS0" "000000045" ""
mar 23 11:30:39.85: [ 2227]: RECV FAX: end
mar 23 11:30:39.85: [ 2227]: SESSION END

 

Qué estoy hacuendo mal?

 

Gracias.