Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Adaptive answer, MT5634ZBA-V92 (was Receive problems with MT2834ZDX modems)



Bill Campbell wrote:

Mar 21 16:47:08.19: [ 5676]: SESSION BEGIN 000005548 12062329186
Mar 21 16:47:08.19: [ 5676]: HylaFAX (tm) Version 4.2.5
Mar 21 16:47:08.19: [ 5676]: <-- [4:ATA\r]
Mar 21 16:47:15.74: [ 5676]: --> [3:FAX]
Mar 21 16:47:15.74: [ 5676]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
Mar 21 16:47:15.74: [ 5676]: RECV FAX: begin
Mar 21 16:47:15.74: [ 5676]: MODEM flush i/o
Mar 21 16:47:15.74: [ 5676]: <-- data [32]
Mar 21 16:47:15.74: [ 5676]: <-- data [2]
Mar 21 16:47:20.02: [ 5676]: --> [6:^H ^H^H ^H]
Mar 21 16:47:20.02: [ 5676]: DELAY 1500 ms
Mar 21 16:47:21.52: [ 5676]: <-- [9:AT+FTH=3\r]
Mar 21 16:47:21.52: [ 5676]: --> [7:CONNECT]
Mar 21 16:47:21.52: [ 5676]: <-- data [32]
Mar 21 16:47:21.52: [ 5676]: <-- data [2]
Mar 21 16:47:22.92: [ 5676]: --> [2:OK]
Mar 21 16:47:22.92: [ 5676]: DELAY 1500 ms
	The other side went away about here.


Well, on the bright side it appears that the patch did what it was supposed to do: that is, HylaFAX now does not see the duplicated "FAX" response. The downside, of course, is that fax reception is still not going. So we're half-way there.


Hopefully this is just an issue of command-response-reaction misunderstanding between HylaFAX and the modem... if it is then we can fix things. If not, then you'll either need to turn to MultiTech for support on this (firmware with a bug fix?) or try to get your DistinctiveRing going (which probably will serve you better in the long-run anyway).

Stop running faxgetty on this modem. Open it up with minicom instead. Send the following commands:

 <-- ATZ
 --> OK
 <-- ATS0=0
 --> OK
 <-- AT+FCLASS=1
 --> OK
 <-- AT+FAA=1
 --> OK

And then place a fax call to that modem. You should see "RING" messages appear. When you do then give the "ATA" command. Then tell me what happens. It should go something like this:

 --> RING
 <-- ATA
 --> FAX

I want to know if anything happens after "FAX" or if it just sits there and finally (probably after 5 seconds) reports ERROR or NO CARRIER.

Thanks,

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services