Re: [hylafax-users] mangled fax output

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Juraj Bednar wrote:

> http://flz.sk.cx/fax.log
>
> This one is correct. It seems that it also used MMR.

No, it used MH...

Feb 07 18:00:36.51: [18380]: USE 9600 bit/s
Feb 07 18:00:36.51: [18380]: USE 20 ms, 10 ms/scanline
Feb 07 18:00:36.51: [18380]: SEND file "docq/doc33.ps;f1"
Feb 07 18:00:36.51: [18380]: USE A4 page width (215 mm)
Feb 07 18:00:36.51: [18380]: USE unlimited page length
Feb 07 18:00:36.51: [18380]: USE 7.7 line/mm
Feb 07 18:00:36.51: [18380]: USE 1-D MH


> I should say, that
> the problem occured only with this kind of fax machine on the receiving
> side (it's Panasonic UF-S10) up to now, but we tried several of this
> type. It's quite common here :(.
>  

My suspicion is that your modem's flow control (whichever one you're 
using) is broken.  So change it, either:

 FlowControl: rtscts     ... if you're currently using xonxoff or don't 
have one specified
 FlowControl: xonxoff      ... if you're currently using rtscts

> Anyways, this one also uses MMR, as it seems. Couldn't it be, that the
> image is sent and received correctly, but the fax is not fast enough to
> print it and does not have buffer to hold the data, so it has to loose
> parts of the image. Is it possible to slow down sending of image data
> somehow?

When using ECM (used with MMR) there is no possibility for this being 
the case.  But, since ECM/MMR aren't being used here this isn't important.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*