Re: [hylafax-users] Pagesize: Sending A4, but want na-let

Thinking the problem was a Courier V Everything modem in Class 1, I switched to the only other modem that works, which is a USR Sportster in Class1. The output was exactly the same. Perhaps there is a clue in the following log.

first pageis marked: Page 1 of 1 and 1/1

second page is marked: Page 01 and 1/1

The sending agent thinks there is a single page, but the receiving agent gets a page and a bit more. This looks just like a paper length issue.

hyla.conf PageSize is letter (I've also tried na-let).

Following is some log data. Any advice appreciated.

Feb 28 15:32:18.26: [24926]: SESSION BEGIN 000002609 131231233xxxx

Feb 28 15:32:18.26: [24926]: HylaFAX (tm) Version 4.2.1

Feb 28 15:32:18.26: [24926]: SEND FAX: JOB 113 DEST 31233xxxx COMMID 000002609 DEVICE '/dev/ttyS2'

Feb 28 15:32:18.26: [24926]: <-- [9:AT+FLO=2\r]

Feb 28 15:32:18.40: [24926]: --> [2:OK]

Feb 28 15:32:18.40: [24926]: <-- [9:AT+FPP=0\r]

Feb 28 15:32:18.55: [24926]: --> [2:OK]

Feb 28 15:32:18.55: [24926]: <-- [9:AT+FBO=0\r]

Feb 28 15:32:18.70: [24926]: --> [2:OK]

Feb 28 15:32:18.70: [24926]: <-- [10:AT+FCT=30\r]

Feb 28 15:32:18.85: [24926]: --> [2:OK]

Feb 28 15:32:18.85: [24926]: <-- [15:AT+FNR=1,1,1,1\r]

Feb 28 15:32:19.00: [24926]: --> [2:OK]

Feb 28 15:32:19.00: [24926]: <-- [9:AT+FIE=0\r]

Feb 28 15:32:19.15: [24926]: --> [2:OK]

Feb 28 15:32:19.15: [24926]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]

Feb 28 15:32:19.30: [24926]: --> [2:OK]

Feb 28 15:32:19.31: [24926]: DIAL 3123322974

Feb 28 15:32:19.31: [24926]: <-- [15:ATDT3123322974\r]

Feb 28 15:32:37.61: [24926]: --> [4:+FCO]

Feb 28 15:32:39.51: [24926]: --> [59:+FNF:00000900082D13124070334FFFFFFFFFFFFF011A02021001820130]

Feb 28 15:32:39.51: [24926]: REMOTE NSF "00000900082D13124070334FFFFFFFFFFFFF011A02021001820130"

Feb 28 15:32:39.51: [24926]: NSF remote fax equipment: unknown

Feb 28 15:32:40.22: [24926]: --> [27:+FCI:" +13124070334"]

Feb 28 15:32:40.22: [24926]: REMOTE CSI "+13124070334"

Feb 28 15:32:40.68: [24926]: --> [20:+FIS:1,5,0,2,1,0,0,1]

Feb 28 15:32:40.86: [24926]: --> [2:OK]

Feb 28 15:32:40.86: [24926]: REMOTE best rate 14400 bit/s

Feb 28 15:32:40.86: [24926]: REMOTE max A4 page width (215 mm)

Feb 28 15:32:40.86: [24926]: REMOTE max unlimited page length

Feb 28 15:32:40.86: [24926]: REMOTE best vres 7.7 line/mm

Feb 28 15:32:40.86: [24926]: REMOTE best format 2-D MR

Feb 28 15:32:40.86: [24926]: REMOTE best 5 ms/scanline

Feb 28 15:32:40.86: [24926]: USE 14400 bit/s

Feb 28 15:32:40.86: [24926]: USE 5 ms/scanline

Feb 28 15:32:40.86: [24926]: SEND file "docq/doc117.ps;30"

Feb 28 15:32:40.87: [24926]: USE A4 page width (215 mm)

Feb 28 15:32:40.87: [24926]: USE unlimited page length

Feb 28 15:32:40.87: [24926]: USE 3.85 line/mm

Feb 28 15:32:40.87: [24926]: USE 1-D MH

Feb 28 15:32:40.87: [24926]: <-- [23:AT+FIS=0,5,0,2,0,0,0,1\r]

Feb 28 15:32:41.02: [24926]: --> [2:OK]

Feb 28 15:32:41.02: [24926]: <-- [7:AT+FDT\r]

Feb 28 15:32:41.17: [24926]: --> [20:+FCS:0,5,0,2,0,0,0,1]

Feb 28 15:32:48.77: [24926]: --> [7:CONNECT]

Feb 28 15:32:48.77: [24926]: SEND begin page

Feb 28 15:32:48.78: [24926]: <-- data [1030]

Feb 28 15:32:48.78: [24926]: <-- data [1025]

Feb 28 15:32:48.78: [24926]: <-- data [1024]

Feb 28 15:32:50.78: [24926]: <-- data [1024]

Feb 28 15:32:52.78: [24926]: <-- data [624]

Feb 28 15:32:52.78: [24926]: SENT 8814 bytes of data

Feb 28 15:32:52.78: [24926]: SEND 1D RTC

Feb 28 15:32:52.78: [24926]: <-- data [9]

Feb 28 15:32:52.78: [24926]: SEND end page

Feb 28 15:32:52.78: [24926]: SEND send EOP (no more pages or documents)

Feb 28 15:32:52.78: [24926]: <-- data [2]

Feb 28 15:33:00.71: [24926]: --> [7:+FHS:00]

Feb 28 15:33:00.71: [24926]: REMOTE HANGUP: Normal and proper end of connection (code 0)

Feb 28 15:33:00.71: [24926]: SEND recv MCF (message confirmation)

Feb 28 15:33:00.72: [24926]: SEND FAX (000002609): FROM user@xxxxxxxxxxx TO 31233xxxx (docq/doc117.ps;30 sent in 0:20)

Feb 28 15:33:01.49: [24926]: SEND FAX (000002609): FROM user@xxxxxxxxxx TO 31233xxxx (page 1 of 1 sent in 0:20)

Feb 28 15:33:02.51: [24926]: <-- [5:ATH0\r]

Feb 28 15:33:02.51: [24926]: --> [2:OK]

Feb 28 15:33:02.84: [24926]: SESSION END

>>>Lee Howard <faxguy@xxxxxxxxxxxxxxxx> 02/28/06 4:11 pm >>>

Mark Gillingham wrote:

>the log says "USE A4 page width (215mm)" was requested.

North American Letter, US Legal, and A4 all use the same page width

(it's the length that varies)... so don't worry about this part.

Lee.

____________________ HylaFAX(tm) Users Mailing List

To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi

On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null

*To learn about commercial HylaFAX(tm) support, mail