Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] AT+FRM=146 sometimes with timeout



Hi List,

sometimes my modem (devolo mircolink II) seems to not respond while receiving 
a fax. Having a look at the logs, I nearly always see the problem occurs
when the modem gets the "AT+FRM=146". Reading the archives I found out, the 
only answers to that command are "OK" or "ERROR". But my modem does not 
answer at all. As this happens only on one out of hundred faxes, I think it 
could be that the modem sometimes is not quick enough to answer the command 
within 7 seconds. 

Is there a parameter that can be changed in the way that hylafax waits for 
e.g. 10 or 15 seconds from an answer from the modem ?
 
Mar 01 11:22:01.69: [ 3886]: MODEM input buffering enabled
Mar 01 11:22:01.69: [ 3886]: <-- [11:AT+FRM=146\r]
Mar 01 11:22:08.69: [ 3886]: MODEM TIMEOUT: reading line from modem
Mar 01 11:22:08.89: [ 3886]: MODEM TIMEOUT: reading line from modem
Mar 01 11:22:08.89: [ 3886]: MODEM <Timeout>
Mar 01 11:22:08.89: [ 3886]: MODEM input buffering disabled


-- 
HAGOS eG                 phone: +49 711 7880592
Matthias Reich             fax: +49 711 7880535
Industriestr. 62           web: http://www.hagos.de
D-70565 Stuttgart         mail: rei@xxxxxxxx
Germany

Attachment: pgp00000.pgp
Description: PGP signature



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services