Re: [hylafax-users] Could not open recvq/fax000001396.tif; either not TIFF or corrupted.

[itxaspe@xxxxxxxxx]

OK! 
thank you very much. I'll try to upgrade...

If the OK has not be sent to the sender,
then it's a good new.-. ;)

Lee Howard <faxguy@xxxxxxxxxxxxxxxx>

02/21/06 04:41 PM

Para	itxaspe@xxxxxxxxx
cc	hylafax-users@xxxxxxxxxxx
Asunto	Re: [hylafax-users] Could not open recvq/fax000001396.tif; either not TIFF or corrupted.

itxaspe@xxxxxxxxx wrote:

> Good morning... Hylafax is working perfectly, but now we have recieved
> a PDF file which cannot be opened.
> Here's the log that we receive......
> Does anybody know if the sender has recieved an OK or an ERROR ????????
> It won't be very good if the sender recieved an OK.. ;(
>
> Feb 20 20:23:48.61: [ 1061]: RECV recv PPS (partial page signal)
> Feb 20 20:23:48.61: [ 1061]: RECV recv EOP (no more pages or documents)
> Feb 20 20:23:48.61: [ 1061]: RECV received 1 frames of block 1 of
page 1
> Feb 20 20:23:48.61: [ 1061]: <-- [9:AT+FRS=7\r]
> Feb 20 20:23:48.74: [ 1061]: --> [2:OK]
> Feb 20 20:23:48.74: [ 1061]: <-- [9:AT+FTH=3\r]
> Feb 20 20:23:48.79: [ 1061]: --> [7:CONNECT]
> Feb 20 20:23:51.12: [ 1061]: --> [2:OK]
> Feb 20 20:23:51.12: [ 1061]: RECV send PPR (partial page request)
> Feb 20 20:23:51.12: [ 1061]: <-- [11:AT+FRM=146\r]
> Feb 20 20:23:52.00: [ 1061]: --> [8:+FCERROR]
> Feb 20 20:23:52.00: [ 1061]: <-- [11:AT+FRM=146\r]
> Feb 20 20:23:59.11: [ 1061]: --> [2:OK]
> Feb 20 20:23:59.11: [ 1061]: <-- [9:AT+FRS=7\r]
> Feb 20 20:23:59.24: [ 1061]: --> [2:OK]
> Feb 20 20:23:59.25: [ 1061]: RECV FAX: Failed to properly detect 
> high-speed data carrier.
> Feb 20 20:23:59.25: [ 1061]: <-- [9:AT+FTH=3\r]
> Feb 20 20:23:59.25: [ 1061]: RECV FAX (000002544): from <UNSPECIFIED>,
> page 1 in 5:18, INF, 7.7 line/mm, 2-D MMR, 14400 bit/s
> Feb 20 20:23:59.26: [ 1061]: RECV FAX (000002544): 
> recvq/fax000001396.tif from <UNSPECIFIED>, route to <unspecified>,
1 
> pages in 5:27
> Feb 20 20:23:59.30: [ 1061]: --> [7:CONNECT]
> Feb 20 20:24:00.62: [ 1061]: --> [2:OK]


An upgrade from 4.2.1 to 4.2.5 will improve how HylaFAX behaves here.  
But to answer your questions, no a receipt confirmation was not 
transmitted to the sender.  The reason you couldn't open the TIFF
was 
because it was only one line long... too short.

Lee.