Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] receiving multiple pages



In this instance, I faxed myself 3 pages and I received half of one.

Session Log:
Feb 15 15:45:09.90: [ 5705]: SESSION BEGIN 000000058 97248325251
Feb 15 15:45:09.90: [ 5705]: HylaFAX (tm) Version 4.2.3
Feb 15 15:45:09.90: [ 5705]: <-- [13:AT+FCLASS=1A\r]
Feb 15 15:45:15.09: [ 5705]: --> [7:CONNECT]
Feb 15 15:45:15.09: [ 5705]: ANSWER: FAX CONNECTION  DEVICE '/dev/modem'
Feb 15 15:45:15.09: [ 5705]: RECV FAX: begin
Feb 15 15:45:15.09: [ 5705]: <-- data [32]
Feb 15 15:45:15.09: [ 5705]: <-- data [2]
Feb 15 15:45:15.25: [ 5705]: --> [7:CONNECT]
Feb 15 15:45:15.25: [ 5705]: <-- data [23]
Feb 15 15:45:15.25: [ 5705]: <-- data [2]
Feb 15 15:45:15.97: [ 5705]: --> [7:CONNECT]
Feb 15 15:45:15.97: [ 5705]: <-- data [13]
Feb 15 15:45:15.97: [ 5705]: <-- data [2]
Feb 15 15:45:18.23: [ 5705]: --> [2:OK]
Feb 15 15:45:18.23: [ 5705]: <-- [9:AT+FRH=3\r]
Feb 15 15:45:19.15: [ 5705]: --> [7:CONNECT]
Feb 15 15:45:20.49: [ 5705]: --> [2:OK]
Feb 15 15:45:20.49: [ 5705]: REMOTE TSI "972 4 8325251"
Feb 15 15:45:20.49: [ 5705]: <-- [9:AT+FRH=3\r]
Feb 15 15:45:20.50: [ 5705]: --> [7:CONNECT]
Feb 15 15:45:20.81: [ 5705]: --> [2:OK]
Feb 15 15:45:20.81: [ 5705]: REMOTE wants 14400 bit/s
Feb 15 15:45:20.81: [ 5705]: REMOTE wants A4 page width (215 mm)
Feb 15 15:45:20.81: [ 5705]: REMOTE wants unlimited page length
Feb 15 15:45:20.81: [ 5705]: REMOTE wants R16 x 15.4 line/mm
Feb 15 15:45:20.81: [ 5705]: REMOTE wants 2-D MMR
Feb 15 15:45:20.81: [ 5705]: REMOTE wants T.30 Annex A, 256-byte ECM
Feb 15 15:45:20.81: [ 5705]: RECV training at v.17 14400 bit/s
Feb 15 15:45:20.81: [ 5705]: <-- [11:AT+FRM=145\r]
Feb 15 15:45:22.55: [ 5705]: --> [7:CONNECT]
Feb 15 15:45:24.11: [ 5705]: RECV: TCF 2812 bytes, 3% non-zero, 2707 zero-run
Feb 15 15:45:24.12: [ 5705]: --> [10:NO CARRIER]
Feb 15 15:45:24.12: [ 5705]: <-- [9:AT+FRS=7\r]
Feb 15 15:45:24.22: [ 5705]: --> [2:OK]
Feb 15 15:45:24.22: [ 5705]: TRAINING succeeded
Feb 15 15:45:24.22: [ 5705]: <-- [9:AT+FTH=3\r]
Feb 15 15:45:24.41: [ 5705]: --> [7:CONNECT]
Feb 15 15:45:24.41: [ 5705]: <-- data [3]
Feb 15 15:45:24.41: [ 5705]: <-- data [2]
Feb 15 15:45:25.59: [ 5705]: --> [2:OK]
Feb 15 15:45:25.59: [ 5705]: <-- [11:AT+FRM=146\r]
Feb 15 15:45:26.51: [ 5705]: --> [7:CONNECT]
Feb 15 15:45:26.80: [ 5705]: RECV received frame number 0
...
Feb 15 15:45:45.53: [ 5705]: RECV received frame number 124
Feb 15 15:47:30.71: [ 5705]: Timeout receiving HDLC frame
Feb 15 15:47:34.31: [ 5705]: Timeout awaiting synchronization sequence
Feb 15 15:47:34.31: [ 5705]: Bad HDLC terminating flag received.
Feb 15 15:47:37.00: [ 5705]: Timeout awaiting synchronization sequence
--Last 2 lines repeated over 50 times
Feb 15 15:51:22.22: [ 5705]: MODEM <Empty line>
Feb 15 15:51:24.23: [ 5705]: MODEM <Empty line>
Feb 15 15:51:26.23: [ 5705]: MODEM <Empty line>
Feb 15 15:51:26.23: [ 5705]: <-- [9:AT+FRH=3\r]
Feb 15 15:51:26.36: [ 5705]: --> [8:AT+FRH=3]
Feb 15 15:51:26.36: [ 5705]: <-- [9:AT+FRH=3\r]
Feb 15 15:51:26.37: [ 5705]: --> [13:EAT+FRH=3RROR]
Feb 15 15:51:26.37: [ 5705]: <-- [9:AT+FRH=3\r]
Feb 15 15:51:26.50: [ 5705]: --> [8:AT+FRH=3]
Feb 15 15:51:26.50: [ 5705]: <-- [9:AT+FRH=3\r]
Feb 15 15:51:26.51: [ 5705]: --> [13:EAT+FRH=3RROR]
Feb 15 15:51:26.51: [ 5705]: <-- [9:AT+FRH=3\r]
Feb 15 15:51:26.64: [ 5705]: --> [8:AT+FRH=3]
Feb 15 15:51:26.64: [ 5705]: RECV keeping unconfirmed page
Feb 15 15:51:26.84: [ 5705]: RECV: 32000 bytes of data, 1780 total lines
Feb 15 15:51:26.85: [ 5705]: RECV FAX (000000058): from 972 4 8325251, page 1 in 6:11, INF, R16 x 15.4 line/mm, 2-D MMR, 14400
 bit/s
Feb 15 15:51:26.85: [ 5705]: RECV FAX (000000058): recvq/fax000000018.tif from 972 4 8325251, route to <unspecified>, 1 pages
in 6:11
Feb 15 15:51:26.85: [ 5705]: RECV FAX: T.30 T2 timeout, expected signal not received
Feb 15 15:51:26.85: [ 5705]: <-- [9:AT+FTH=3\r]
Feb 15 15:51:26.85: [ 5705]: --> [5:ERROR]
Feb 15 15:51:26.85: [ 5705]: RECV FAX (000000058): session with 972 4 8325251 terminated abnormally: T.30 T2 timeout, expected
 signal not received
Feb 15 15:51:26.85: [ 5705]: RECV FAX: bin/faxrcvd "recvq/fax000000018.tif" "modem" "000000058" "T.30 T2 timeout, expected sig
nal not received"
Feb 15 15:51:26.86: [ 5705]: RECV FAX: end
Feb 15 15:51:26.86: [ 5705]: SESSION END


Thank You
Sim Zacks
IT Manager
CompuLab
04-829-0145 - Office
04-832-5251 - Fax

________________________________________________________________________________

Sim Zacks wrote:

>Version: Hylafax 4.2.3-r1
>OS : Gentoo Linux
>
>My hylafax never receives more then 1 page. I'm looking specifically
>at line 4 in the log segment I posted below where it says the session terminated abnormally.
>I have tried from a number of fax machines and it always receives the first
>page and then dies.
>

Send us the session log.

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services