Re: [hylafax-users] Routing based on called number with Eicon BRI

[Jehan PROCACCIA <Jehan.Procaccia@xxxxxxxxxxx>]

Lee Howard wrote:

> Jehan PROCACCIA wrote:
>
> > By the way, How can I check that my modem is capable of retrieving 
> > Caller ID ?
> > In minicom when I call the modem, I only see :
> > OK
> >
> > RING
> >
> > RING
>
>
>
> You would need to refer to your modem manual, but try "AT+VCID=1" and 
> if that doesn't work "AT#CID=1".  You also need to have Caller*ID 
> service provided to you by your telco.
>
> Lee.
Thanks, I tried that, unfortunalty it doesn't show more information :-( 
, probably that my telco doesn't support it , unfortunaltly telco 
techicians here cannot tell me , they just said that I have an analog 
line without the "class" protocol support, I suppose it means I will 
never be able to get that information, unless the autocom is upgraded ? 
or maybe I should investigate in gOCR techonolgy to try to scan the top 
line image data where the dialed # appears ...

minicom com2
AT S7=45 S0=0 L1 V1 X4 &c1 E1 Q0
OK
AT+VCID=1
ERROR
AT#CID=1
OK
RING
RING

Thanks anyway .





____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*