Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Newbie:facsimile not received



Hi,

I am a newbie at this I have been having problems getting Hylafax to receive faxes.
My modem is Multitech *MT5634ZPX-PCI-U-NV .
*The firmware is updated and was tested perfectly on Windows2000 to receive faxes.
Tried changing it between class 1 and class 2.0


Any help will be appreciated.

Thanks,

TE:-D

*
*
--- Begin Message ---
--- Begin Message ---
An attempt to receive facsimile on ttyS2 failed because:

    T.30 T2 timeout, expected page not received

    ---- Transcript of session follows ----

Feb 03 16:54:33.52: [ 2333]: SESSION BEGIN 000000021 6329149999
Feb 03 16:54:33.52: [ 2333]: HylaFAX (tm) Version 4.2.5
Feb 03 16:54:33.52: [ 2333]: <-- [4:ATA\r]
Feb 03 16:54:42.96: [ 2333]: --> [7:CONNECT]
Feb 03 16:54:42.96: [ 2333]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS2'
Feb 03 16:54:42.96: [ 2333]: RECV FAX: begin
Feb 03 16:54:43.03: [ 2333]: --> [7:CONNECT]
Feb 03 16:54:43.06: [ 2333]: --> [7:CONNECT]
Feb 03 16:54:45.31: [ 2333]: --> [2:OK]
Feb 03 16:54:45.31: [ 2333]: <-- [9:AT+FRH=3\r]
Feb 03 16:54:45.84: [ 2333]: --> [7:CONNECT]
Feb 03 16:54:47.63: [ 2333]: --> [2:OK]
Feb 03 16:54:47.63: [ 2333]: REMOTE TSI ""
Feb 03 16:54:47.63: [ 2333]: <-- [9:AT+FRH=3\r]
Feb 03 16:54:47.66: [ 2333]: --> [7:CONNECT]
Feb 03 16:54:47.94: [ 2333]: --> [2:OK]
Feb 03 16:54:47.94: [ 2333]: REMOTE wants 9600 bit/s
Feb 03 16:54:47.94: [ 2333]: REMOTE wants A4 page width (215 mm)
Feb 03 16:54:47.94: [ 2333]: REMOTE wants unlimited page length
Feb 03 16:54:47.94: [ 2333]: REMOTE wants 3.85 line/mm
Feb 03 16:54:47.94: [ 2333]: REMOTE wants 2-D MR
Feb 03 16:54:47.94: [ 2333]: RECV training at v.29 9600 bit/s
Feb 03 16:54:47.94: [ 2333]: <-- [10:AT+FRM=96\r]
Feb 03 16:54:48.52: [ 2333]: --> [7:CONNECT]
Feb 03 16:54:51.69: [ 2333]: RECV: TCF 1840 bytes, 0% non-zero, 1821 zero-run
Feb 03 16:54:51.72: [ 2333]: --> [10:NO CARRIER]
Feb 03 16:54:51.72: [ 2333]: <-- [9:AT+FRS=7\r]
Feb 03 16:54:51.80: [ 2333]: --> [2:OK]
Feb 03 16:54:51.80: [ 2333]: TRAINING succeeded
Feb 03 16:54:51.80: [ 2333]: <-- [9:AT+FTH=3\r]
Feb 03 16:54:52.77: [ 2333]: --> [7:CONNECT]
Feb 03 16:54:53.16: [ 2333]: --> [2:OK]
Feb 03 16:54:53.20: [ 2333]: <-- [10:AT+FRM=96\r]
Feb 03 16:54:53.60: [ 2333]: --> [7:CONNECT]
Feb 03 16:54:53.60: [ 2333]: RECV: begin page
Feb 03 16:57:20.21: [ 2333]: RECV: Missing EOL after 5 seconds
Feb 03 16:57:20.21: [ 2333]: RECV: end page
Feb 03 16:57:22.21: [ 2333]: MODEM <Timeout>
Feb 03 16:57:24.21: [ 2333]: MODEM <Empty line>
Feb 03 16:57:26.22: [ 2333]: MODEM <Empty line>
Feb 03 16:57:26.42: [ 2333]: MODEM <Timeout>
Feb 03 16:57:26.42: [ 2333]: RECV FAX (000000021): recvq/fax000000017.tif from , route to <unspecified>, 0 pages in 2:43
Feb 03 16:57:26.42: [ 2333]: RECV FAX: T.30 T2 timeout, expected page not received
Feb 03 16:57:26.42: [ 2333]: <-- [9:AT+FTH=3\r]
Feb 03 16:57:27.49: [ 2333]: --> [7:CONNECT]
Feb 03 16:57:27.98: [ 2333]: --> [2:OK]
Feb 03 16:57:27.98: [ 2333]: RECV FAX (000000021): session with  terminated abnormally: T.30 T2 timeout, expected page not received
Feb 03 16:57:27.98: [ 2333]: RECV FAX: bin/faxrcvd "recvq/fax000000017.tif" "ttyS2" "000000021" "T.30 T2 timeout, expected page not received"
Feb 03 16:57:27.98: [ 2333]: RECV FAX: end
Feb 03 16:57:27.98: [ 2333]: SESSION END

__________ NOD32 1.1392 (20060202) Information __________

This message was checked by NOD32 antivirus system.
http://www.eset.com




--- End Message ---

--- End Message ---


Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services