Re: [hylafax-users] Consistent error from Panasonic fm

["andrew rinaldi" <andrew.rinaldi@xxxxxxxxxxxx>]

Hi Mark.

If you continue to have problems then you should consider an upgrade to
4.2.5 and then possibly replacing your USR modem.  HylaFAX 4.2.5 has a
number of Class 1 enhancements which may help you and many of the USR modems
have faulty fax firmware.

Regards

ANDREW RINALDI
Mainpine Support
USA +1 718 701 2422 | Asia/Europe +44 1225 436137 
andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com 

-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Mark Gillingham
Sent: 27 January 2006 17:55
To: faxguy@xxxxxxxxxxxxxxxx
Cc: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] Consistent error from Panasonic fm

Changing the modem to Class 1 helped with this old fax machine. The customer
was able to fax right away. I'm monitoring the success of other faxes and am
a little nervous. I'm getting errors: "ECM page received contained no image
data." and "Failed to properly detect high-speed data carrier" from a single
source. I'll monitor for the rest of the day so that I have more specific
information. 

One should always listen to Lee, especially if one is as naive about faxing
as I. 

Mark

>>> Lee Howard <faxguy@xxxxxxxxxxxxxxxx> 1/26/2006 5:06:36 PM >>>
Mark Gillingham wrote:

>I'm running Hylafax 4.2.1 on Debian stable and have USR Courier 
>Everything modems
>  
>

>Jan 26 14:14:48.41: [15564]: <-- [4:ATA\r] Jan 26 14:15:02.36: [15564]: 
>--> [4:+FCO]
>

Have you tried this in Class 1?

Re-run faxaddmodem and choose Class 1.

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*