|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Page 2 missing
If you convert your tiff to ps with the command
tiff2ps
then you must call it with "-a" option (convert all pages)
tiff2ps -a ...............
On Thu, 12 Jan
2006 16:19:53 -0500 "Terry D. Boldt"
<fastsnip-hylafax1@xxxxxxxxx> wrote:
> In receiving 2 page fax (cover page plus one page), the cover
> page page was stored, but page 2 is missing.
>
> I examined the log file, and accordig to the log file, both
> pages were received. I have appended the log file here.
>
> Any ideas what happened to page 2?
>
> Log File: (I have removed duplicate lines)
>
> Jan 11 14:21:33.78: [ 4723]: SESSION BEGIN 000000036
> 13013305467 Jan 11 14:21:33.78: [ 4723]: HylaFAX (tm) Version
> 4.2.4 Jan 11 14:21:33.78: [ 4723]: <-- [4:ATA\r]
> Jan 11 14:21:45.61: [ 4723]: --> [7:CONNECT]
> Jan 11 14:21:45.61: [ 4723]: ANSWER: FAX CONNECTION DEVICE
> '/dev/ttyS0' Jan 11 14:21:45.62: [ 4723]: RECV FAX: begin
> Jan 11 14:21:45.65: [ 4723]: <-- data [32]
> Jan 11 14:21:45.65: [ 4723]: <-- data [2]
> Jan 11 14:21:47.64: [ 4723]: --> [7:CONNECT]
> Jan 11 14:21:47.64: [ 4723]: <-- data [23]
> Jan 11 14:21:47.64: [ 4723]: <-- data [2]
> Jan 11 14:21:48.47: [ 4723]: --> [7:CONNECT]
> Jan 11 14:21:48.47: [ 4723]: <-- data [13]
> Jan 11 14:21:48.47: [ 4723]: <-- data [2]
> Jan 11 14:21:49.12: [ 4723]: --> [2:OK]
> Jan 11 14:21:49.12: [ 4723]: <-- [9:AT+FRH=3\r]
> Jan 11 14:21:49.63: [ 4723]: --> [7:CONNECT]
> Jan 11 14:21:51.08: [ 4723]: --> [2:OK]
> Jan 11 14:21:51.08: [ 4723]: REMOTE TSI "773 832 5299"
> Jan 11 14:21:51.08: [ 4723]: <-- [9:AT+FRH=3\r]
> Jan 11 14:21:51.10: [ 4723]: --> [7:CONNECT]
> Jan 11 14:21:51.35: [ 4723]: --> [2:OK]
> Jan 11 14:21:51.35: [ 4723]: REMOTE wants 14400 bit/s
> Jan 11 14:21:51.35: [ 4723]: REMOTE wants A4 page width (215
> mm) Jan 11 14:21:51.35: [ 4723]: REMOTE wants unlimited page
> length Jan 11 14:21:51.35: [ 4723]: REMOTE wants 3.85 line/mm
> Jan 11 14:21:51.35: [ 4723]: REMOTE wants 2-D MMR
> Jan 11 14:21:51.35: [ 4723]: REMOTE wants T.30 Annex A,
> 256-byte ECM Jan 11 14:21:51.35: [ 4723]: RECV training at v.17
> 14400 bit/s Jan 11 14:21:51.35: [ 4723]: <-- [11:AT+FRM=145\r]
> Jan 11 14:21:53.08: [ 4723]: --> [7:CONNECT]
> Jan 11 14:21:54.62: [ 4723]: RECV: TCF 2727 bytes, 0% non-zero,
> 2699 zero-run Jan 11 14:21:54.62: [ 4723]: --> [10:NO CARRIER]
> Jan 11 14:21:54.62: [ 4723]: <-- [9:AT+FRS=7\r]
> Jan 11 14:21:54.73: [ 4723]: --> [2:OK]
> Jan 11 14:21:54.73: [ 4723]: TRAINING succeeded
> Jan 11 14:21:54.73: [ 4723]: <-- [9:AT+FTH=3\r]
> Jan 11 14:21:54.77: [ 4723]: --> [7:CONNECT]
> Jan 11 14:21:54.77: [ 4723]: <-- data [3]
> Jan 11 14:21:54.77: [ 4723]: <-- data [2]
> Jan 11 14:21:56.08: [ 4723]: --> [2:OK]
> Jan 11 14:21:56.08: [ 4723]: <-- [11:AT+FRM=146\r]
> Jan 11 14:21:56.77: [ 4723]: --> [7:CONNECT]
> Jan 11 14:21:58.47: [ 4723]: RECV received frame number 0
> .
> .
> .
> Jan 11 14:22:05.07: [ 4723]: RECV received frame number 44
> Jan 11 14:22:05.22: [ 4723]: RECV received RCP frame
> Jan 11 14:22:05.28: [ 4723]: --> [10:NO CARRIER]
> Jan 11 14:22:05.28: [ 4723]: <-- [9:AT+FRH=3\r]
> Jan 11 14:22:05.61: [ 4723]: --> [7:CONNECT]
> Jan 11 14:22:06.66: [ 4723]: --> [2:OK]
> Jan 11 14:22:06.66: [ 4723]: RECV recv PPS (partial page
> signal) Jan 11 14:22:06.66: [ 4723]: RECV recv MPS (more pages,
> same document) Jan 11 14:22:06.66: [ 4723]: RECV received 45
> frames of block 1 of page 1 Jan 11 14:22:06.69: [ 4723]: RECV:
> 11329 bytes of data, 1067 total lines Jan 11 14:22:06.70: [
> 4723]: <-- [9:AT+FRS=7\r] Jan 11 14:22:06.81: [ 4723]: -->
> [2:OK] Jan 11 14:22:06.81: [ 4723]: <-- [9:AT+FTH=3\r]
> Jan 11 14:22:06.85: [ 4723]: --> [7:CONNECT]
> Jan 11 14:22:06.85: [ 4723]: RECV send MCF (message
> confirmation) Jan 11 14:22:06.85: [ 4723]: RECV FAX
> (000000036): from 773 832 5299, page 1 in 0:21, INF, 3.85
> line/mm, 2-D MMR, 14400 bit/s Jan 11 14:22:06.85: [ 4723]: <--
> data [3] Jan 11 14:22:06.85: [ 4723]: <-- data [2]
> Jan 11 14:22:08.16: [ 4723]: --> [2:OK]
> Jan 11 14:22:08.16: [ 4723]: <-- [11:AT+FRM=146\r]
> Jan 11 14:22:08.88: [ 4723]: --> [7:CONNECT]
> Jan 11 14:22:10.58: [ 4723]: RECV received frame number 0
> .
> .
> Jan 11 14:22:24.49: [ 4723]: RECV received frame number 93
> Jan 11 14:22:24.49: [ 4723]: RECV received RCP frame
> Jan 11 14:22:24.60: [ 4723]: --> [10:NO CARRIER]
> Jan 11 14:22:24.60: [ 4723]: <-- [9:AT+FRH=3\r]
> Jan 11 14:22:24.95: [ 4723]: --> [7:CONNECT]
> Jan 11 14:22:25.98: [ 4723]: --> [2:OK]
> Jan 11 14:22:25.98: [ 4723]: RECV recv PPS (partial page
> signal) Jan 11 14:22:25.98: [ 4723]: RECV recv EOP (no more
> pages or documents) Jan 11 14:22:25.98: [ 4723]: RECV received
> 94 frames of block 1 of page 2 Jan 11 14:22:26.06: [ 4723]:
> RECV: 23947 bytes of data, 1068 total lines Jan 11 14:22:26.06:
> [ 4723]: <-- [9:AT+FRS=7\r] Jan 11 14:22:26.17: [ 4723]: -->
> [2:OK] Jan 11 14:22:26.17: [ 4723]: <-- [9:AT+FTH=3\r]
> Jan 11 14:22:26.21: [ 4723]: --> [7:CONNECT]
> Jan 11 14:22:26.21: [ 4723]: <-- data [3]
> Jan 11 14:22:26.21: [ 4723]: <-- data [2]
> Jan 11 14:22:27.52: [ 4723]: --> [2:OK]
> Jan 11 14:22:27.52: [ 4723]: RECV send MCF (message
> confirmation) Jan 11 14:22:27.52: [ 4723]: RECV FAX
> (000000036): from 773 832 5299, page 2 in 0:20, INF, 3.85
> line/mm, 2-D MMR, 14400 bit/s Jan 11 14:22:27.52: [ 4723]: RECV
> FAX (000000036): recvq/fax000000024.tif from 773 832 5299,
> route to <unspecified>, 2 pages in 0:42 Jan 11 14:22:27.52: [
> 4723]: <-- [9:AT+FRH=3\r] Jan 11 14:22:27.99: [ 4723]: -->
> [7:CONNECT] Jan 11 14:22:28.88: [ 4723]: --> [2:OK]
> Jan 11 14:22:28.88: [ 4723]: RECV recv DCN (disconnect)
> Jan 11 14:22:28.88: [ 4723]: RECV FAX: bin/faxrcvd
> "recvq/fax000000024.tif" "ttyS0" "000000036" ""
> Jan 11 14:22:28.88: [ 4723]: RECV FAX: end
> Jan 11 14:22:28.88: [ 4723]: SESSION END
>
> It would appear that the software "thought" it stored both
> pages in "recvq/fax000000024.tif". But only page one (the
> cover page) is in the file.
>
>
> --
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++
> ======================================================
> ******************************************************
> If you are always rushing towards the future,
> Then you never have any past.
>
> Terry Boldt
> ******************************************************
> Paraphrasing Ben Franklin:
>
> Those who sacrifice freedom for safety, have neither.
>
> The exact quote:
>
> They that can give up essential liberty to obtain a little
> temporary safety deserve neither liberty nor safety.
> Benjamin Franklin (1706 - 1790),
> US author, diplomat, inventor, physicist, politician, &
> printer Historical Review of Pennsylvania, 1759
>
> ******************************************************
>
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
> To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx
> < /dev/null
> *To learn about commercial HylaFAX(tm) support, mail
> sales@xxxxxxxxx*
>
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
