Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] multiport modem and user based grouping
This patch is incompatible with 4.2.1 which comes with FreeBSD ports tree.
There is just one file that needs to be adjusted to use this patch
faxQueueApp.c++ . Other files applies without problem but on this file
patching is not succesful since there are no relevant lines..
> Omer Faruk Sen wrote:
>
>>Is it possible to configure hylafax to use spesific modem to send fax and
>>base this on username of the sender?
>>
>>For example I have 8 modems attached with muliport pci card and I want
>>user X to send fax through fax#1 and user Y to send fax through fax#2 and
>>etc..
>>
>>I want to set this up using email interface of hylafax (faxmail).
>>
>>
>
> Attached is a patch that will give you this feature. It should apply to
> most recent versions of HylaFAX. If you desire it in a tarball it is in
> 4.2.5.1 which can be found at:
>
> http://hylafax.sourceforge.net/news/4.2.5.1.php
>
> The feature basically adds an "owner" option to DestControls.
> Documentation can be seen in 'man destctrls' and here:
>
> http://hylafax.sourceforge.net/man/destctrls.php
>
> But, basically by adding an "owner" field to the DestControls entry you
> will restrict the application of that entry to apply only to jobs
> submitted by that owner (hfaxd login username). So, for example
> DestControls entries of:
>
> .* owner=omer modem=ttyS0
> .* owner=lee modem=ttyS1
>
> This would make all jobs submitted by "omer" be sent through modem ttyS0
> and all jobs submitted by "lee" be sent through modem ttyS1.
>
>>By the way which MultiPort PCI card do you advice me to use with FreeBSD
>> 6.0?
>>
>
> The multiport PCI card options generally are Comtrol RocketModem II,
> Digi Acceleport RAS, MultiTech ISI, and MainPine RockForce... however, I
> think most of those probably won't have drivers for FreeBSD, so that
> leaves MainPine RockForce (it uses standard PCI serial drivers that I
> expect are in FreeBSD by default)... but don't take my word on it.
>
> Lee.
>
>
--
Omer Faruk Sen
http://www.faruk.net
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*