|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] CL-MD56XX: Some faxe could be reveived, somenot
Hi Manuel.
It 'could' be the problem... but then so could the Fritz card and/or the
Fritz fax software and/or 4.2.1, etc. etc.
I would recommend that you try another modem based on the Agere Venus
chipset because this is simple. This will also give you V.34 Super-G3 fax
and arguably the most stable hardware modem available.
Regards
ANDREW RINALDI
Mainpine Support
USA +1 718 701 2422 | Asia/Europe +44 1225 436137
andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com
-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Manuel H.
Sent: 05 January 2006 16:01
To: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] CL-MD56XX: Some faxe could be reveived, somenot
I found something about my CirrusLogic Modem: Could this be the problem, so
i don't get faxes from some machines(mainly pc's with fritzfax isdn cards)?
Handshake/phasing problem? Could this affect the "NO CARRIER"
error?
http://help.sitestar.net/modemissues/knownproblem.htm
Cirrus Logic Handshake/phasing problem. Similar to the AOpens. Will not
connect. (chipset CL-MD56xx typically) Needs latest firmware 6.04 or later.
If worse comes to worse, I've been able to get the Cirrus Logics to connect
with this init string
Thank you all so much, best wishes
m.
Am Donnerstag, den 05.01.2006, 15:54 +0100 schrieb Manuel H.:
> Hi Andrew.
>
> Thank you for your adivse! I 'll search for a different modem. I think
> i have some left at my work ;)
>
> But i found something out, belonging to my problem:
> It seems that i could receive faxes from faxmachines, but i have
> problems with the faxes which are sent from computers with ISDN Fritz
> PCI Cards and their FritzFax Software. Are their known problems?
> My distributor is gentoo linux and as soon as hylafax 4.2.4 is in
> portage i 'll upgrade.
>
> Thank you, best wishes.
> m.
>
>
>
> Am Donnerstag, den 05.01.2006, 14:35 +0000 schrieb andrew rinaldi:
> > Hi Manuel.
> >
> > If you have a different modem then please try it and report the results.
> >
> > You should also consider an upgrade to 4.2.4 because of the ongoing
> > work in the Class 1 driver (and recent security fixes).
> >
> > Regards
> >
> > ANDREW RINALDI
> > Mainpine Support
> > USA +1 718 701 2422 | Asia/Europe +44 1225 436137
> > andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com
> >
> > -----Original Message-----
> > From: hylafax-users-bounce@xxxxxxxxxxx
> > [mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Manuel H.
> > Sent: 05 January 2006 14:04
> > To: Lee Howard
> > Cc: hylafax-users@xxxxxxxxxxx
> > Subject: Re: [hylafax-users] CL-MD56XX: Some faxe could be reveived,
> > somenot
> >
> > Hello, thank you for your answer!
> >
> > I tried it with ATA and had the same results (some work but the most
> > faxes didn not receive. You said that the modem is not detecting any
> > HDLC signals from the sender? How could i check this? I don't
> > understand why i get some faxes and others can't be receive? This
> > must be a setting in the config.ttyS0???? Why do i get an "NO CARRIER"
message in the log?
> > Would be a different modem a solution, or whats your advise?
> >
> > Thank you, best wishes
> > m.
> >
> >
> >
> >
> > Am Mittwoch, den 04.01.2006, 09:53 -0800 schrieb Lee Howard:
> > > Manuel H. wrote:
> > >
> > > >>Jan 03 13:00:22.31: [ 8402]: SESSION BEGIN 000000035
> > > >>495312842085 Jan 03 13:00:22.31: [ 8402]: HylaFAX (tm) Version
> > > >>4.2.1 Jan 03
> > > >>13:00:22.31: [ 8402]: <-- [6:ATAX3\r] Jan 03 13:00:27.30: [ 8402]:
> > > >>--> [7:CONNECT] Jan 03 13:00:27.30: [ 8402]: ANSWER: FAX
> > > >>--> CONNECTION
> > > >>DEVICE '/dev/ttyS0'
> > > >>Jan 03 13:00:27.30: [ 8402]: RECV FAX: begin Jan 03 13:00:27.30:
> > > >>[
> > > >>8402]: <-- data [32] Jan 03 13:00:27.30: [ 8402]: <-- data [2]
> > > >>Jan
> > > >>03 13:00:28.67: [ 8402]: --> [7:CONNECT] Jan 03 13:00:28.67: [
> > > >>8402]: <-- data [23] Jan 03 13:00:28.67: [ 8402]: <-- data [2]
> > > >>Jan
> > > >>03 13:00:29.43: [ 8402]: --> [7:CONNECT] Jan 03 13:00:29.43: [
> > > >>8402]: <-- data [10] Jan 03 13:00:29.43: [ 8402]: <-- data [2]
> > > >>Jan
> > > >>03 13:00:29.88: [ 8402]: --> [2:OK] Jan 03 13:00:29.88: [ 8402]:
> > > >><-- [9:AT+FRH=3\r] Jan 03 13:00:30.04: [ 8402]: --> [7:CONNECT]
> > > >>Jan 03
> > > >>13:00:31.54: [ 8402]: --> [10:NO CARRIER]
> > > >>
> > >
> > > (log repeats the same thing over and over)
> > >
> > > Firstly, what's the ATAX3 for? Why do you have ModemAnswerCmd set
> > > to
> > > ATAX3 and not just ATA? My modem manuals indicate that all of the
> > > ATXn commands are intended for dialing (sending) and not answering
> > > (receiving). So I'd guess that the behavior they'd cause in the
> > > wrong application would be unexpected.
> > >
> > > Anyway, the rest of the log tells us that the modem is unable to
> > > detect any HDLC signalling from the sender... which surely isn't
> > > the fault of the sender. So the modem isn't doing what it's
> > > supposed to... possibly because of that X3. Possibly due to other
things.
> > >
> > > If you have a different modem try that if removing the X3 doesn't
help.
> > >
> > > Lee.
> > >
> >
> >
> > ____________________ HylaFAX(tm) Users Mailing List
_______________________
> > To subscribe/unsubscribe, click
> > http://lists.hylafax.org/cgi-bin/lsg2.cgi
> > On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
/dev/null
> > *To learn about commercial HylaFAX(tm) support, mail
> > sales@xxxxxxxxx*
> >
> >
> >
>
>
> ____________________ HylaFAX(tm) Users Mailing List
_______________________
> To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
/dev/null
> *To learn about commercial HylaFAX(tm) support, mail
> sales@xxxxxxxxx*
>
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
