[hylafax-users] Help with inbound faxes (newbie): error log attached

[seml@xxxxxxxxxxxx]

Dear friend,

newbie to hylafax here. Configured following the 
documentation.

We are trying to setup the firts fully fledged installation 
of hylafax. It is hylafax 4.2.0 on Mandrake LE2005.

We have been able to make outbound fax to work.

We cannot make inbound fax to work. We would like the server 
recognises the type of incoming call. 

If it is a fax call, then answer with fax. 
If it is voice call, let someone answer.

We got this error message the last time we tried to receive 
a message.

Message 2:
From fax@xxxxxxxxxxxxxxxxxxx  Wed Dec 21 10:56:56 2005
X-Original-To: FaxMaster
Delivered-To: symbulos@xxxxxxxxxxxxxxxxxxx
To: FaxMaster@xxxxxxxxxxxxxxxxxxx
From: The HylaFAX Receive Agent <fax@xxxxxxxxxxxxxxxxxxx>
Subject: facsimile not received
Date: Wed, 21 Dec 2005 10:56:55 +0000 (GMT)

An attempt to receive facsimile on ttyS0 failed because:

    Failure to receive silence.

    ---- Transcript of session follows ----

Dec 21 10:55:56.08: [19377]: SESSION BEGIN 000000002 
441535648555
Dec 21 10:55:56.08: [19377]: HylaFAX (tm) Version 4.2.0
Dec 21 10:55:56.08: [19377]: <-- [4:ATA\r]
Dec 21 10:56:00.78: [19377]: --> [7:CONNECT]
Dec 21 10:56:00.78: [19377]: ANSWER: FAX CONNECTION  DEVICE 
'/dev/ttyS0'
Dec 21 10:56:00.78: [19377]: RECV FAX: begin
Dec 21 10:56:01.91: [19377]: --> [7:CONNECT]
Dec 21 10:56:02.72: [19377]: --> [7:CONNECT]
Dec 21 10:56:03.19: [19377]: --> [2:OK]
Dec 21 10:56:03.19: [19377]: <-- [9:AT+FRH=3\r]
Dec 21 10:56:03.30: [19377]: --> [7:CONNECT]
Dec 21 10:56:05.03: [19377]: --> [2:OK]
Dec 21 10:56:05.03: [19377]: REMOTE TSI "01535210472"
Dec 21 10:56:05.03: [19377]: <-- [9:AT+FRH=3\r]
Dec 21 10:56:05.04: [19377]: --> [7:CONNECT]
Dec 21 10:56:05.38: [19377]: --> [2:OK]
Dec 21 10:56:05.38: [19377]: REMOTE wants 14400 bit/s
Dec 21 10:56:05.38: [19377]: REMOTE wants A4 page width (215 
mm)
Dec 21 10:56:05.38: [19377]: REMOTE wants unlimited page 
length
Dec 21 10:56:05.38: [19377]: REMOTE wants 3.85 line/mm
Dec 21 10:56:05.38: [19377]: REMOTE wants 1-D MH
Dec 21 10:56:05.38: [19377]: RECV training at v.17 14400 
bit/s
Dec 21 10:56:05.38: [19377]: <-- [11:AT+FRM=145\r]
Dec 21 10:56:07.19: [19377]: --> [7:CONNECT]
Dec 21 10:56:08.69: [19377]: RECV: TCF 2719 bytes, 0% 
non-zero, 2697 zero-run
Dec 21 10:56:08.70: [19377]: --> [10:NO CARRIER]
Dec 21 10:56:08.70: [19377]: DELAY 75 ms
Dec 21 10:56:08.77: [19377]: TRAINING succeeded
Dec 21 10:56:08.77: [19377]: <-- [9:AT+FTH=3\r]
Dec 21 10:56:09.78: [19377]: --> [7:CONNECT]
Dec 21 10:56:10.05: [19377]: --> [2:OK]
Dec 21 10:56:10.05: [19377]: <-- [11:AT+FRM=146\r]
Dec 21 10:56:10.97: [19377]: --> [7:CONNECT]
Dec 21 10:56:10.97: [19377]: RECV: begin page
Dec 21 10:56:24.03: [19377]: RECV: 1261 total lines, 0 bad 
lines, 0 consecutive bad lines
Dec 21 10:56:24.03: [19377]: RECV: end page
Dec 21 10:56:24.03: [19377]: --> [10:NO CARRIER]
Dec 21 10:56:24.03: [19377]: <-- [9:AT+FRH=3\r]
Dec 21 10:56:24.21: [19377]: --> [7:CONNECT]
Dec 21 10:56:25.27: [19377]: --> [2:OK]
Dec 21 10:56:25.27: [19377]: RECV recv EOP (no more pages or 
documents)
Dec 21 10:56:25.27: [19377]: <-- [9:AT+FRS=7\r]
Dec 21 10:56:55.27: [19377]: MODEM <Timeout>
Dec 21 10:56:55.27: [19377]: RECV FAX (000000002): 
recvq/fax000000001.tif from 01535210472, route to 
<unspecified>, 0 pages
 in 0:55
Dec 21 10:56:55.29: [19377]: RECV FAX: Failure to receive 
silence.
Dec 21 10:56:55.29: [19377]: <-- [9:AT+FTH=3\r]
Dec 21 10:56:55.39: [19377]: --> [2:OK]
Dec 21 10:56:55.39: [19377]: RECV FAX (000000002): session 
with 01535210472 terminated abnormally: Failure to receive 
silence.
Dec 21 10:56:55.39: [19377]: RECV FAX: bin/faxrcvd 
"recvq/fax000000001.tif" "ttyS0" "000000002" "Failure to 
receive silence
." "" ""
Dec 21 10:56:55.40: [19377]: RECV FAX: end
Dec 21 10:56:55.40: [19377]: SESSION END



-- 
symbulos uk ltd, co. no. 5441973, UK VAT reg no. 865302135
website http://www.symbulos.com

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*