Re: [hylafax-users] /dev/ttySx is not a terminal device.

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Paul Smith wrote:

> I recently bought a MultiTech MT5634ZPX-PCI-NV.  This morning I
> installed it, installed hylafax-server on debian testing (4.2.2-1).
>
> All looked fine until I got to the faxaddmodem section of the
> configuration.
>
> fax2:~# dmesg | grep tty
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> ttyS14 at I/O 0xb400 (irq = 193) is a 16550A

This is something that I've noticed with recent (kernel 2.6) versions of 
the serial driver.

It *should* be ttyS4 and probably not IRQ 193.

There may be some kernel options that may fix this behavior, and maybe 
running a few setserial commands would fix it, but I usually have solved 
it by removing the serial driver from the kernel and load it as a module 
and then run setserial.

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*