Re: [hylafax-users] Incoming faxes routing based on called number

["Andrew Rinaldi" <andrew.rinaldi@xxxxxxxxxxxx>]

If you have a PABX connected to your T1/PRI then that should be able to do
the DID to DTMF conversion for you.  If this is your setup then probably the
easiest thing to try is using minicom to test your setup before using
HylaFAX.  This will allow you to test the delivery of DTMF digits by issuing
AT commands to the modem.

Regards

ANDREW RINALDI
Mainpine Support
USA +1 718 701 2422 | Asia/Europe +44 1225 436137 
andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com 

-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Tom Rymes
Sent: 28 November 2005 11:44
To: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] Incoming faxes routing based on called number

On Nov 28, 2005, at 2:19 AM, Thanos A. wrote:


>> What kind of modem do you have.
>>
>
> It's a Conexant HSF PCI modem card, with latest Linuxant drivers, 
> Class 1.0 modem.
>
>
>> This is a difficult thing because everyone seems to have a different 
>> presentation of DID, different hardware, different numbers of DID 
>> digits, etc.
>>
>
> Well, from what I have read and understood at the moment, I have set 
> ServerTracing to 0xFFF, and the following parameters
>
> CallIDPattern:         "NAME="
> CallIDPattern:         "NMBR="
> CallIDPattern:         SHIELDED_DTMF
> CallIDAnswerLength:    10
>
> But can't get any useful information to extract DID.
>

I may be mistaken here, but DID will only work with a T1 or a PRI.  
Regular analog POTS lines do not send DID information. You can route the
faxes based on incming callerID or by which phone line the call came in on
(you would route by device in that case)

Tom


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*