|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] a question about fylafax usage
my hylafax log as follows:
v 26 00:19:12.51: [ 4034]: SESSION BEGIN 000000075 3364221850
Nov 26 00:19:12.51: [ 4034]: HylaFAX (tm) Version 4.2.3
Nov 26 00:19:12.51: [ 4034]: SEND FAX: JOB 52 DEST 0,64221850 COMMID
000000075 DEVICE '/dev/ttyS0' FROM 'root <root@ESR-LINUX-01>' USER root
Nov 26 00:19:12.51: [ 4034]: <-- [12:AT+FCLASS=1\r]
Nov 26 00:19:12.73: [ 4034]: --> [2:OK]
Nov 26 00:19:12.73: [ 4034]: DIAL 0,64221850
Nov 26 00:19:12.73: [ 4034]: <-- [15:ATDT0,64221850\r]
Nov 26 00:19:28.78: [ 4034]: --> [7:CONNECT]
Nov 26 00:19:28.79: [ 4034]: --> [2:OK]
Nov 26 00:19:28.79: [ 4034]: REMOTE NSF "86 00 CA 00 00 E4 01 C8 40 F0 03
18 80 00 00"
Nov 26 00:19:28.79: [ 4034]: NSF remote fax equipment: unknown
Nov 26 00:19:28.79: [ 4034]: <-- [9:AT+FRH=3\r]
Nov 26 00:19:29.53: [ 4034]: --> [7:CONNECT]
Nov 26 00:19:29.55: [ 4034]: --> [2:OK]
Nov 26 00:19:29.55: [ 4034]: REMOTE CSI "08602164221850"
Nov 26 00:19:29.55: [ 4034]: <-- [9:AT+FRH=3\r]
Nov 26 00:19:29.91: [ 4034]: --> [7:CONNECT]
Nov 26 00:19:29.92: [ 4034]: --> [2:OK]
Nov 26 00:19:29.92: [ 4034]: REMOTE best rate 33600 bit/s
Nov 26 00:19:29.92: [ 4034]: REMOTE max A4 page width (215 mm)
Nov 26 00:19:29.92: [ 4034]: REMOTE max unlimited page length
Nov 26 00:19:29.92: [ 4034]: REMOTE best vres 300 x 300 dpi
Nov 26 00:19:29.92: [ 4034]: REMOTE format support: MH, MR, MMR
Nov 26 00:19:29.92: [ 4034]: REMOTE supports T.30 Annex A, 256-byte ECM
Nov 26 00:19:29.92: [ 4034]: REMOTE best 10 ms/scanline
Nov 26 00:19:29.92: [ 4034]: USE 14400 bit/s
Nov 26 00:19:29.92: [ 4034]: USE error correction mode
Nov 26 00:19:29.92: [ 4034]: SEND file "docq/doc53.ps;c0"
Nov 26 00:19:29.92: [ 4034]: USE A4 page width (215 mm)
Nov 26 00:19:29.92: [ 4034]: USE unlimited page length
Nov 26 00:19:29.92: [ 4034]: USE 3.85 line/mm
Nov 26 00:19:29.92: [ 4034]: USE 2-D MMR
Nov 26 00:19:29.92: [ 4034]: USE 0 ms/scanline
Nov 26 00:19:29.92: [ 4034]: SEND training at v.17 14400 bit/s
Nov 26 00:19:29.92: [ 4034]: <-- [9:AT+FRS=7\r]
Nov 26 00:19:29.94: [ 4034]: --> [2:OK]
Nov 26 00:19:29.94: [ 4034]: <-- [9:AT+FTH=3\r]
Nov 26 00:19:29.96: [ 4034]: --> [7:CONNECT]
Nov 26 00:19:29.96: [ 4034]: <-- data [23]
Nov 26 00:19:29.96: [ 4034]: <-- data [2]
Nov 26 00:19:29.99: [ 4034]: --> [7:CONNECT]
Nov 26 00:19:29.99: [ 4034]: <-- data [7]
Nov 26 00:19:29.99: [ 4034]: <-- data [2]
Nov 26 00:19:33.38: [ 4034]: --> [2:OK]
Nov 26 00:19:33.38: [ 4034]: <-- [9:AT+FTS=7\r]
Nov 26 00:19:33.39: [ 4034]: --> [2:OK]
Nov 26 00:19:33.39: [ 4034]: <-- [11:AT+FTM=145\r]
Nov 26 00:19:33.49: [ 4034]: --> [7:CONNECT]
Nov 26 00:19:33.49: [ 4034]: <-- data [1024]
Nov 26 00:19:33.49: [ 4034]: <-- data [1024]
Nov 26 00:19:33.49: [ 4034]: <-- data [652]
Nov 26 00:19:33.49: [ 4034]: <-- data [2]
Nov 26 00:19:36.98: [ 4034]: --> [2:OK]
Nov 26 00:19:36.98: [ 4034]: <-- [9:AT+FRH=3\r]
Nov 26 00:19:38.12: [ 4034]: --> [7:CONNECT]
Nov 26 00:19:38.13: [ 4034]: --> [2:OK]
Nov 26 00:19:38.13: [ 4034]: SEND training at v.17 12000 bit/s
Nov 26 00:19:38.13: [ 4034]: <-- [9:AT+FRS=7\r]
Nov 26 00:19:38.15: [ 4034]: --> [2:OK]
Nov 26 00:19:38.15: [ 4034]: <-- [9:AT+FTH=3\r]
Nov 26 00:19:38.17: [ 4034]: --> [7:CONNECT]
Nov 26 00:19:38.17: [ 4034]: <-- data [23]
Nov 26 00:19:38.17: [ 4034]: <-- data [2]
Nov 26 00:19:38.20: [ 4034]: --> [7:CONNECT]
Nov 26 00:19:38.20: [ 4034]: <-- data [7]
Nov 26 00:19:38.20: [ 4034]: <-- data [2]
Nov 26 00:19:41.58: [ 4034]: --> [2:OK]
Nov 26 00:19:41.58: [ 4034]: <-- [9:AT+FTS=7\r]
Nov 26 00:19:41.59: [ 4034]: --> [2:OK]
Nov 26 00:19:41.59: [ 4034]: <-- [11:AT+FTM=121\r]
Nov 26 00:19:41.69: [ 4034]: --> [7:CONNECT]
Nov 26 00:19:41.69: [ 4034]: <-- data [1024]
Nov 26 00:19:41.69: [ 4034]: <-- data [1024]
Nov 26 00:19:41.69: [ 4034]: <-- data [202]
Nov 26 00:19:41.69: [ 4034]: <-- data [2]
Nov 26 00:19:45.15: [ 4034]: --> [2:OK]
Nov 26 00:19:45.15: [ 4034]: <-- [9:AT+FRH=3\r]
Nov 26 00:19:46.32: [ 4034]: --> [7:CONNECT]
Nov 26 00:19:46.32: [ 4034]: --> [2:OK]
Nov 26 00:19:46.32: [ 4034]: SEND training at v.17 9600 bit/s
Nov 26 00:19:46.32: [ 4034]: <-- [9:AT+FRS=7\r]
Nov 26 00:19:46.33: [ 4034]: --> [2:OK]
Nov 26 00:19:46.33: [ 4034]: <-- [9:AT+FTH=3\r]
Nov 26 00:19:46.35: [ 4034]: --> [7:CONNECT]
Nov 26 00:19:46.35: [ 4034]: <-- data [23]
Nov 26 00:19:46.35: [ 4034]: <-- data [2]
Nov 26 00:19:46.38: [ 4034]: --> [7:CONNECT]
Nov 26 00:19:46.38: [ 4034]: <-- data [7]
Nov 26 00:19:46.38: [ 4034]: <-- data [2]
Nov 26 00:19:49.76: [ 4034]: --> [2:OK]
Nov 26 00:19:49.76: [ 4034]: <-- [9:AT+FTS=7\r]
Nov 26 00:19:49.77: [ 4034]: --> [2:OK]
Nov 26 00:19:49.77: [ 4034]: <-- [10:AT+FTM=97\r]
Nov 26 00:19:49.87: [ 4034]: --> [7:CONNECT]
Nov 26 00:19:49.87: [ 4034]: <-- data [1024]
Nov 26 00:19:49.87: [ 4034]: <-- data [776]
Nov 26 00:19:49.87: [ 4034]: <-- data [2]
Nov 26 00:19:53.35: [ 4034]: --> [2:OK]
Nov 26 00:19:53.35: [ 4034]: <-- [9:AT+FRH=3\r]
Nov 26 00:19:54.50: [ 4034]: --> [7:CONNECT]
Nov 26 00:19:54.50: [ 4034]: --> [2:OK]
Nov 26 00:19:54.50: [ 4034]: SEND training at v.29 9600 bit/s
Nov 26 00:19:54.50: [ 4034]: <-- [9:AT+FRS=7\r]
Nov 26 00:19:54.51: [ 4034]: --> [2:OK]
Nov 26 00:19:54.51: [ 4034]: <-- [9:AT+FTH=3\r]
Nov 26 00:19:54.53: [ 4034]: --> [7:CONNECT]
Nov 26 00:19:54.53: [ 4034]: <-- data [23]
Nov 26 00:19:54.53: [ 4034]: <-- data [2]
Nov 26 00:19:54.56: [ 4034]: --> [7:CONNECT]
Nov 26 00:19:54.56: [ 4034]: <-- data [7]
Nov 26 00:19:54.56: [ 4034]: <-- data [2]
Nov 26 00:20:02.11: [ 4034]: --> [0:]
Nov 26 00:20:02.11: [ 4034]: MODEM <Empty line>
Nov 26 00:20:02.11: [ 4034]: Error sending T.30 prologue frames
Nov 26 00:20:02.11: [ 4034]: SEND training at v.29 7200 bit/s
Nov 26 00:20:02.11: [ 4034]: <-- [9:AT+FRS=7\r]
Nov 26 00:20:32.11: [ 4034]: MODEM <Timeout>
Nov 26 00:20:32.11: [ 4034]: Failure to receive silence.
Nov 26 00:20:32.11: [ 4034]: Error sending T.30 prologue frames
Nov 26 00:20:32.11: [ 4034]: SEND training at v.27ter 4800 bit/s
Nov 26 00:20:32.11: [ 4034]: <-- [9:AT+FRS=7\r]
Nov 26 00:21:02.11: [ 4034]: MODEM <Timeout>
Nov 26 00:21:02.11: [ 4034]: Failure to receive silence.
Nov 26 00:21:02.11: [ 4034]: Error sending T.30 prologue frames
Nov 26 00:21:02.11: [ 4034]: SEND training at v.27ter fallback mode 2400
bit/s
Nov 26 00:21:02.11: [ 4034]: <-- [9:AT+FRS=7\r]
Nov 26 00:21:32.11: [ 4034]: MODEM <Timeout>
Nov 26 00:21:32.11: [ 4034]: Failure to receive silence.
Nov 26 00:21:32.11: [ 4034]: Error sending T.30 prologue frames
Nov 26 00:21:32.11: [ 4034]: TRAINING failed
Nov 26 00:21:32.11: [ 4034]: <-- [9:AT+FTH=3\r]
Nov 26 00:21:39.66: [ 4034]: --> [0:]
Nov 26 00:21:39.66: [ 4034]: <-- [5:ATH0\r]
Nov 26 00:21:44.66: [ 4034]: MODEM <Timeout>
Nov 26 00:21:44.66: [ 4034]: SESSION END
and I don't know what happend ,and at the fax machine appears COMM. ERROR,
and I execute the command "faxstat -d" which shows the sendfax list ,and
the fax which I sended just ,
"TTS status "appers the information as "NO response to PPS repeat"
so please tell me what about the error ,and the config setting
Thank you very much !
_________________________________________________________________
免费下载 MSN Explorer: http://explorer.msn.com/lccn/
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
