Re: [hylafax-users] JobRetryNoAnswer doesn't work?

[Mark Hunting <mark@xxxxxxxxxx>]

Now I've put this in /etc/hylafax/config and I added it to the top of 
all per-device files:

ServerTracing:          0xffff
SessionTracing:         0xffff

Aiden, I'll mail you my server log. These are the tree session logs 
(looks correct to me, the modem gives 9:+FHNG: 11):

Nov 24 10:19:19.07: [ 2977]: SESSION BEGIN 000132539 3164263xxxx
Nov 24 10:19:19.07: [ 2977]: HylaFAX (tm) Version 4.2.2
Nov 24 10:19:19.07: [ 2977]: SEND FAX: JOB 101678 DEST 064263xxxx COMMID 
000132539 DEVICE '/dev/ttyds08'
Nov 24 10:19:19.07: [ 2977]: STATE CHANGE: RUNNING -> SENDING
Nov 24 10:19:19.07: [ 2977]: <-- [10:AT+FBOR=0\r]
Nov 24 10:19:19.07: [ 2977]: --> [2:OK]
Nov 24 10:19:19.07: [ 2977]: <-- [3:AT\r]
Nov 24 10:19:19.07: [ 2977]: --> [2:OK]
Nov 24 10:19:19.07: [ 2977]: <-- [10:AT+FBUG=1\r]
Nov 24 10:19:19.07: [ 2977]: --> [2:OK]
Nov 24 10:19:19.07: [ 2977]: <-- [24:AT+FDCC=1,5,2,2,0,2,0,0\r]
Nov 24 10:19:19.07: [ 2977]: --> [2:OK]
Nov 24 10:19:19.07: [ 2977]: DIAL 064263xxxx
Nov 24 10:19:19.07: [ 2977]: <-- [15:ATDT064263xxxx\r]
Nov 24 10:19:31.66: [ 2977]: --> [9:+FHNG: 11]
Nov 24 10:19:31.66: [ 2977]: REMOTE HANGUP: No answer (T.30 T1 timeout) 
(code 11)
Nov 24 10:19:31.66: [ 2977]: SEND FAILED: JOB 101678 DEST 064263xxxx ERR 
No answer (T.30 T1 timeout)
Nov 24 10:19:31.66: [ 2977]: <-- [5:ATH0\r]
Nov 24 10:19:31.66: [ 2977]: --> [2:OK]
Nov 24 10:19:31.66: [ 2977]: MODEM set DTR OFF
Nov 24 10:19:31.66: [ 2977]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Nov 24 10:19:31.66: [ 2977]: SESSION END

Nov 24 10:20:42.46: [ 2994]: SESSION BEGIN 000132540 3164263xxxx
Nov 24 10:20:42.46: [ 2994]: HylaFAX (tm) Version 4.2.2
Nov 24 10:20:42.46: [ 2994]: SEND FAX: JOB 101678 DEST 064263xxxx COMMID 
000132540 DEVICE '/dev/ttyds11'
Nov 24 10:20:42.46: [ 2994]: STATE CHANGE: RUNNING -> SENDING
Nov 24 10:20:42.46: [ 2994]: <-- [10:AT+FBOR=0\r]
Nov 24 10:20:42.46: [ 2994]: --> [2:OK]
Nov 24 10:20:42.46: [ 2994]: <-- [3:AT\r]
Nov 24 10:20:42.46: [ 2994]: --> [2:OK]
Nov 24 10:20:42.46: [ 2994]: <-- [10:AT+FBUG=1\r]
Nov 24 10:20:42.46: [ 2994]: --> [2:OK]
Nov 24 10:20:42.46: [ 2994]: <-- [24:AT+FDCC=1,5,2,2,0,2,0,0\r]
Nov 24 10:20:42.46: [ 2994]: --> [2:OK]
Nov 24 10:20:42.46: [ 2994]: DIAL 064263xxxx
Nov 24 10:20:42.46: [ 2994]: <-- [15:ATDT064263xxxx\r]
Nov 24 10:20:52.01: [ 2994]: --> [9:+FHNG: 11]
Nov 24 10:20:52.01: [ 2994]: REMOTE HANGUP: No answer (T.30 T1 timeout) 
(code 11)
Nov 24 10:20:52.01: [ 2994]: SEND FAILED: JOB 101678 DEST 064263xxxx ERR 
No answer (T.30 T1 timeout)
Nov 24 10:20:52.01: [ 2994]: <-- [5:ATH0\r]
Nov 24 10:20:52.01: [ 2994]: --> [2:OK]
Nov 24 10:20:52.01: [ 2994]: MODEM set DTR OFF
Nov 24 10:20:52.01: [ 2994]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Nov 24 10:20:52.01: [ 2994]: SESSION END

Nov 24 10:22:02.81: [ 2998]: SESSION BEGIN 000132541 3164263xxxx
Nov 24 10:22:02.81: [ 2998]: HylaFAX (tm) Version 4.2.2
Nov 24 10:22:02.81: [ 2998]: SEND FAX: JOB 101678 DEST 064263xxxx COMMID 
000132541 DEVICE '/dev/ttyds06'
Nov 24 10:22:02.81: [ 2998]: STATE CHANGE: RUNNING -> SENDING
Nov 24 10:22:02.81: [ 2998]: <-- [10:AT+FBOR=0\r]
Nov 24 10:22:02.81: [ 2998]: --> [2:OK]
Nov 24 10:22:02.81: [ 2998]: <-- [3:AT\r]
Nov 24 10:22:02.81: [ 2998]: --> [2:OK]
Nov 24 10:22:02.81: [ 2998]: <-- [10:AT+FBUG=1\r]
Nov 24 10:22:02.81: [ 2998]: --> [2:OK]
Nov 24 10:22:02.81: [ 2998]: <-- [24:AT+FDCC=1,5,2,2,0,2,0,0\r]
Nov 24 10:22:02.81: [ 2998]: --> [2:OK]
Nov 24 10:22:02.81: [ 2998]: DIAL 064263xxxx
Nov 24 10:22:02.81: [ 2998]: <-- [15:ATDT064263xxxx\r]
Nov 24 10:22:17.66: [ 2998]: --> [9:+FHNG: 11]
Nov 24 10:22:17.66: [ 2998]: REMOTE HANGUP: No answer (T.30 T1 timeout) 
(code 11)
Nov 24 10:22:17.66: [ 2998]: SEND FAILED: JOB 101678 DEST 064263xxxx ERR 
No answer (T.30 T1 timeout)
Nov 24 10:22:17.66: [ 2998]: SEND FAILED: JOB 101678 DEST 064263xxxx ERR 
No answer (T.30 T1 timeout); too many attempts to dial
Nov 24 10:22:17.66: [ 2998]: <-- [5:ATH0\r]
Nov 24 10:22:17.66: [ 2998]: --> [2:OK]
Nov 24 10:22:17.66: [ 2998]: MODEM set DTR OFF
Nov 24 10:22:17.66: [ 2998]: STATE CHANGE



> In Class2Modem::dialResponse(), we do try and parse the FHNG resonses.
>
> In a typical Class2 "No carrier" situation, we see somthing like:
> 	Nov 23 08:58:07.36: [26604]: DIAL 916196908599
> 	Nov 23 08:58:07.36: [26604]: <-- [25:ATS0=255;DT916196908599@\r]
> 	Nov 23 08:59:13.44: [26604]: --> [9:+FHNG: 11]
> 	Nov 23 08:59:13.44: [26604]: REMOTE HANGUP: No answer (T.30 T1 timeout) (code 11)
> 	Nov 23 08:59:13.44: [26604]: SEND FAILED: JOB 2059 DEST 916196908599 ERR No answer (T.30 T1 timeout)
> 	Nov 23 08:59:13.44: [26604]: <-- [5:ATH0\r]
> 	Nov 23 08:59:13.44: [26604]: --> [2:OK]
> 	Nov 23 08:59:13.44: [26604]: SESSION END
>
> And +FHNG:11 response to the dial *should* go back to as ClassModem::NOANSWER.
>
> That, in turn should be checked as retryMAX[NOANSWER] (where NOANSWER == 3)
> in FaxServer::sendFax(...).
>
> Mark, can you put ServerTracing up to 0xFFFF (put it first in the config
> file so we see config file parsing) for the device, and show all the
> logs for a complete set of sends on that job?  Session logs as well,
> just for verification.
>
> Send them to me directly, or post them if they are really large (which
> they should be).
>
> Is the 4.2.2 from source, or debian packages?
>
> a.
>
>  

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*