|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] REMOTE HANGUP: Unspecified Phase D error (code A0)
Bruce Ackerson wrote:
Nov 14 11:30:02.37: [ 3665]: --> [7:+FHS:A0]
Nov 14 11:30:02.37: [ 3665]: REMOTE HANGUP: Unspecified Phase D error
(code A0)
Phase D is the portion of the fax protocol where the post-page message
(after the page image data is sent) is communictated from the sender to
the receiver and then the receiver responds to that message.
"Unspecified" basically means that the modem is not able to report
exactly what the problem was.
If you get this reproducibly, then I'd recommend upgrading the firmware
on the modem, and if that does not help then to switch to Class 1/1.0
and see if you experience the same problem there.
Thanks,
Lee.
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
