Re: [hylafax-users] Fw: Notify

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Max Mothwurf wrote:

> Sounds like a code page problem to me. If I look what I receive from hylafax, 
> the dates in the mail-header are:
>
> Content-Type: text/plain; charset=us-ascii
> Content-Transfer-Encoding: 7bit
>
> So, no surprise the the special characters diappear.
>
> Can we change the settings somewhere to
>
> Content-Type: text/plain; charset=iso8859-15
> Content-Transfer-Encoding: quoted-printable
>
> (or something similar)

Try the attached patch.  It will allow you to set "CHARSET=iso8859-15" 
in FaxDispatch or FaxNotify.

The patch is designed to detect the locale setting in configure and to 
propagate it into etc/config.cache.  If you're upgrading, or adding this 
patch to an existing installation, you' need to re-run faxsetup after 
./configure, make, and 'make install' (just as you do when you install), 
in order to get the CHARSET default set into config.cache.  So if 
iso8859-15 shows up from 'locale -c LC_MESSAGES' then it should happen 
"automatically" after re-running faxsetup after rebuilding and reinstalling.

Thanks,

Lee.

diff -Nru hylafax.orig/configure hylafax/configure
--- hylafax.orig/configure	2005-11-12 09:12:54.065694256 -0800
+++ hylafax/configure	2005-11-12 11:37:52.161382720 -0800
@@ -119,6 +119,7 @@
 CHOWN
 CC
 CCOMPILER
+CHARSET
 CMP
 COL
 CP
@@ -294,6 +295,15 @@
 PATH=$PATH:$OPATH
 
 POSIXLY_CORRECT=1; export POSIXLY_CORRECT		# disable GNU extensions
+
+#
+# Check for locale settings before setting LC_ALL.
+#
+CHARSET=`(locale -c LC_MESSAGES | tail -n 1)`
+if test X$CHARSET = X; then
+    CHARSET=us-ascii
+fi
+
 LC_ALL=C; export LC_ALL					# set a common language
 
 #
diff -Nru hylafax.orig/etc/faxsetup.sh.in hylafax/etc/faxsetup.sh.in
--- hylafax.orig/etc/faxsetup.sh.in	2005-11-12 09:12:54.057695472 -0800
+++ hylafax/etc/faxsetup.sh.in	2005-11-12 11:47:43.915422432 -0800
@@ -50,6 +50,7 @@
 
 AWK=@AWK@			# awk for use below
 CAT=@CAT@			# cat command for use below
+CHARSET=@CHARSET@		# character set to use in e-mails
 CHGRP=@CHGRP@			# change file group for use below
 CHMOD=@CHMOD@			# change file mode for use below
 CHOWN=@CHOWN@			# change file owner for use below
@@ -130,6 +131,7 @@
 AWK
 BIN		DIR_BIN
 CAT
+CHARSET
 CHGRP
 CHMOD
 CHOWN
diff -Nru hylafax.orig/util/faxrcvd.sh.in hylafax/util/faxrcvd.sh.in
--- hylafax.orig/util/faxrcvd.sh.in	2005-11-12 09:12:53.801734384 -0800
+++ hylafax/util/faxrcvd.sh.in	2005-11-12 16:11:16.048612808 -0800
@@ -57,6 +57,7 @@
 MIMENCODE=mimencode
 TIFF2PDF=bin/tiff2pdf
 TTYCMD=tty
+CHARSET=us-ascii
 
 . etc/setup.cache
 
@@ -195,8 +196,8 @@
 	 echo "Subject: Facsimile received from $SENDER";
 	 echo ""
 	 echo "--$MIMEBOUNDARY"
-	 echo "Content-Type: text/plain; charset=us-ascii"
-	 echo "Content-Transfer-Encoding: 7bit"
+	 echo "Content-Type: text/plain; charset=$CHARSET"
+	 echo "Content-Transfer-Encoding: quoted-printable"
 	 echo ""
 	 $INFO -n $FILE
 	 echo "ReceivedOn: $DEVICE"
diff -Nru hylafax.orig/util/notify.sh.in hylafax/util/notify.sh.in
--- hylafax.orig/util/notify.sh.in	2005-11-12 09:12:53.817731952 -0800
+++ hylafax/util/notify.sh.in	2005-11-12 16:11:56.124520344 -0800
@@ -70,6 +70,7 @@
 MIMENCODE=mimencode
 TIFF2PDF=bin/tiff2pdf
 TTYCMD=tty
+CHARSET=us-ascii
 
 . etc/setup.cache
 
@@ -397,8 +398,8 @@
     echo "This is a multi-part message in MIME format."
     echo ""
     echo "--$MIMEBOUNDARY"
-    echo "Content-Type: text/plain; charset=us-ascii"
-    echo "Content-Transfer-Encoding: 7bit"
+    echo "Content-Type: text/plain; charset=$CHARSET"
+    echo "Content-Transfer-Encoding: quoted-printable"
     echo ""
 }
 
diff -Nru hylafax.orig/util/pollrcvd.sh.in hylafax/util/pollrcvd.sh.in
--- hylafax.orig/util/pollrcvd.sh.in	2005-11-12 09:12:53.815732256 -0800
+++ hylafax/util/pollrcvd.sh.in	2005-11-12 16:11:35.782612784 -0800
@@ -58,6 +58,7 @@
 MIMENCODE=mimencode
 TIFF2PDF=bin/tiff2pdf
 TTYCMD=tty
+CHARSET=us-ascii
 
 . etc/setup.cache
 
@@ -175,8 +176,8 @@
 	 echo "Subject: Facsimile retrieved from $SENDER";   
 	 echo ""
 	 echo "--$MIMEBOUNDARY"
-	 echo "Content-Type: text/plain; charset=us-ascii"
-	 echo "Content-Transfer-Encoding: 7bit"
+	 echo "Content-Type: text/plain; charset=$CHARSET"
+	 echo "Content-Transfer-Encoding: quoted-printable"
 	 echo ""
 	 echo "$FILE (ftp://$HOSTNAME:$PORT/$FILE):"; $INFO -n $FILE
 	 echo "ReceivedOn: $DEVICE"