Re: [hylafax-users] Control of signaling rate?

[Loren Card <Loren_Card@xxxxxxxxxxxxxx>]

I hadn't thought of that, but it wasn't the problem. 

I was trying to set a speed of 1200 bps, which is lower than "ModemMinSpeed" (2400 bps).
4800, 7200, 9600 bps all work.

I would have thought the FAX should fail if I requested a speed lower than "ModemMinSpeed". It just ignores me and fires it out at 14400... 

Is that a bug or a feature?

Also, Thanks for your help!

./Loren

-----Original Message-----
From: Lee Howard [mailto:faxguy@xxxxxxxxxxxxxxxx]
Sent: Friday, November 04, 2005 4:39 PM
To: Loren Card
Cc: 'hylafax-users@xxxxxxxxxxx'
Subject: Re: [hylafax-users] Control of signaling rate?


Loren Card wrote:

>The -b and -B flags used with 'sendfax' don't seem to affect the signaling rate negotiated for FAX transmission. 
>I've also tried playing with the 'faxmodem' command using the -c argument, but that doesn't seem to do anything either.
>
>The log always reports using a 14400 bps rate.
>  
>

The -B option works for me.  Are you making sure that you use it before 
the -d option?

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*