Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] MainPine & Hylafax Problem with hunt group update



Here are results from minicom:

CASE 1 --- Using port tyS11 for the single working phone line.
                                                             
                                                    
Dial in:
Call in from my cell phone.  This is what I saw on the minicom
console:                                                     
                                                             
RING
RING
RING
RING
It showed only the RING but not thing else.   If I get out of
minicom and call it again from my cell phone the modem will
pick it up.  What am I doing wrong the minicom doesn show
anything except the RING.                                    
                                                             
                                                             
                                                             
       

Dial out:
Call my cell from from minicom console with the following syntax
ATDT 17349994026
                                                             
                                                    
My cell phone ring and it work.
                                                             
                                                    
                                                             
                                                    


CASE 2  ----                                                 
                                                             
   Using port ttyS7 for the hunt non-working phone line.

Dial in:
Call in from my cell phone.  This is what I saw on the minicom
console:                                                     
                                                             
RING
RING
RING
RING
It showed only the RING but not thing else.   If I get out of
minicom and call it again from my cell phone the modem will
pick it up.  What am I doing wrong the minicom doesn show
anything except the RING.                                    
                                                             
                


Dial out:
Call my cell from from minicom console with the following syntax
ATDT 17349994026
                                                             
                                                    
My cell phone ring and it work.


Thank, Tom













---- Original message ----
>Date: Wed, 26 Oct 2005 11:54:07 -0700
>From: Lee Howard <faxguy@xxxxxxxxxxxxxxxx>  
>Subject: Re: [hylafax-users] MainPine & Hylafax Problem with
hunt group  
>To: tom@xxxxxxxxxxxxxx
>Cc: hylafax-users@xxxxxxxxxxx
>
>Tom Miller wrote:
>
>>You modem much not know how to hand the hunt group.
>>
>
>Well, modems don't need to know how to handle hunt groups...
because all 
>of the handling is done on the telco-side of things.
>
>Certainly there is something else that is going on that is
causing the 
>problems.  I would follow the earlier suggestion and open up
each modem 
>port in a minicom session and then call to that line and
watch for the 
>RING messages.  That should help you get closer to seeing
what the real 
>problem is.
>
>Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services