Re: [hylafax-users] RE : Unable to transmit page (giving up after 3 attempts)

To: <pmaladjian@xxxxxxxxxx>, <hylafax-users@xxxxxxxxxxx>
Subject: Re: [hylafax-users] RE : Unable to transmit page (giving up after 3 attempts)
From: "support" <support@xxxxxxxxxxxx>
Reply-to: <support@xxxxxxxxxxxx>
Date: Tue, 25 Oct 2005 16:24:10 +0100

Hi Philippe.

Try an upgrade to 4.2.2 and then let us know the results.

Regards

Mainpine Support
USA +1 718 701 2422 | Asia/Europe +44 1225 436137 
support@xxxxxxxxxxxx | www.mainpine.com 

-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Philippe MALADJIAN
Sent: 25 October 2005 10:31
To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] RE : Unable to transmit page (giving up after 3
attempts)


Sorry, i using hylafax 4.2.1 with the olitec self memory 56000 V90 on Linux
RH9.
_________________________________
HILAIRE s.a. - Philippe MALADJIAN
205 rue Jean Voillot
69100 VILLEURBANNE
tél. : 04 72 1450 66
fax : 04 78 26 02 03
e-mail : pmaladjian@xxxxxxxxxx

-----Message d'origine-----
De : hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] De la part de Philippe MALADJIAN
Envoyé : mardi 25 octobre 2005 10:51 À : hylafax-users@xxxxxxxxxxx Objet :
[hylafax-users] Unable to transmit page (giving up after 3 attempts)

Hello, when i sending fax, certain fax not send with the error:

Unable to transmit page (giving up after 3 attempts); Giving up after 3
attempts to send same page

    ---- Transcript of session follows ----

oct 25 08:36:40.76: [15936]: SESSION BEGIN 000000782 332625972xx oct 25
08:36:40.76: [15936]: HylaFAX (tm) Version 4.2.1 oct 25 08:36:40.76:
[15936]: SEND FAX: JOB 597 DEST 02625972xx COMMID
000000782 DEVICE '/dev/ttyS0'
oct 25 08:36:40.76: [15936]: <-- [12:AT+FCLASS=1\r] oct 25 08:36:40.91:
[15936]: --> [2:OK] oct 25 08:36:40.91: [15936]: DIAL 0262597294 oct 25
08:36:40.91: [15936]: <-- [15:ATDT02625972xx\r] oct 25 08:36:59.20: [15936]:
--> [7:CONNECT] oct 25 08:37:00.28: [15936]: --> [2:OK] oct 25 08:37:00.28:
[15936]: REMOTE NSF "BC 53 F2 80 46 04 01 10 12 00 01"
oct 25 08:37:00.28: [15936]: NSF remote fax equipment: unknown oct 25
08:37:00.28: [15936]: <-- [9:AT+FRH=3\r] oct 25 08:37:00.30: [15936]: -->
[7:CONNECT] oct 25 08:37:01.00: [15936]: --> [2:OK] oct 25 08:37:01.00:
[15936]: REMOTE CSI "02625972xx"
oct 25 08:37:01.00: [15936]: <-- [9:AT+FRH=3\r] oct 25 08:37:01.02: [15936]:
--> [7:CONNECT] oct 25 08:37:01.27: [15936]: --> [2:OK] oct 25 08:37:01.27:
[15936]: REMOTE best rate 9600 bit/s oct 25 08:37:01.27: [15936]: REMOTE max
A4 page width (215 mm) oct 25 08:37:01.27: [15936]: REMOTE max unlimited
page length oct 25 08:37:01.27: [15936]: REMOTE best vres 7.7 line/mm oct 25
08:37:01.27: [15936]: REMOTE best format 2-D MR oct 25 08:37:01.27: [15936]:
REMOTE best 20 ms, 10 ms/scanline oct 25 08:37:01.27: [15936]: USE 9600
bit/s oct 25 08:37:01.27: [15936]: USE 20 ms, 10 ms/scanline oct 25
08:37:01.27: [15936]: SEND file "docq/doc594.ps;40"
oct 25 08:37:01.27: [15936]: USE A4 page width (215 mm) oct 25 08:37:01.27:
[15936]: USE unlimited page length oct 25 08:37:01.27: [15936]: USE 3.85
line/mm oct 25 08:37:01.27: [15936]: USE 2-D MR oct 25 08:37:01.27: [15936]:
SEND training at v.29 9600 bit/s oct 25 08:37:01.27: [15936]: <--
[9:AT+FTH=3\r] oct 25 08:37:01.33: [15936]: --> [7:CONNECT] oct 25
08:37:03.11: [15936]: --> [7:CONNECT] oct 25 08:37:03.54: [15936]: -->
[2:OK] oct 25 08:37:03.54: [15936]: <-- [9:AT+FTS=7\r] oct 25 08:37:03.63:
[15936]: --> [2:OK] oct 25 08:37:03.63: [15936]: <-- [10:AT+FTM=96\r] oct 25
08:37:03.70: [15936]: --> [7:CONNECT] oct 25 08:37:05.65: [15936]: -->
[2:OK] oct 25 08:37:05.65: [15936]: <-- [9:AT+FRH=3\r] oct 25 08:37:07.02:
[15936]: --> [7:CONNECT] oct 25 08:37:07.91: [15936]: --> [2:OK] oct 25
08:37:07.91: [15936]: TRAINING succeeded oct 25 08:37:07.91: [15936]: DELAY
200 ms oct 25 08:37:08.11: [15936]: <-- [10:AT+FTM=96\r] oct 25 08:37:08.17:
[15936]: --> [7:CONNECT] oct 25 08:37:08.17: [15936]: SEND begin page oct 25
08:37:22.14: [15936]: SENT 27487 bytes of data oct 25 08:37:26.14: [15936]:
SENT 7665 bytes of data oct 25 08:37:26.14: [15936]: SEND 2D RTC oct 25
08:37:26.14: [15936]: SEND end page oct 25 08:37:36.81: [15936]: --> [2:]
oct 25 08:37:36.81: [15936]: --> [2:OK] oct 25 08:37:36.81: [15936]: <--
[9:AT+FTS=7\r] oct 25 08:37:36.91: [15936]: --> [2:OK] oct 25 08:37:36.91:
[15936]: SEND send MPS (more pages, same document) oct 25 08:37:36.91:
[15936]: <-- [9:AT+FTH=3\r] oct 25 08:37:36.96: [15936]: --> [7:CONNECT] oct
25 08:37:38.28: [15936]: --> [2:OK] oct 25 08:37:38.28: [15936]: <--
[9:AT+FRH=3\r] oct 25 08:37:41.02: [15936]: --> [7:CONNECT] oct 25
08:37:41.91: [15936]: --> [2:OK] oct 25 08:37:41.91: [15936]: SEND recv RTN
(retrain negative) oct 25 08:37:41.91: [15936]: SEND training at v.29 7200
bit/s oct 25 08:37:41.91: [15936]: <-- [9:AT+FTH=3\r] oct 25 08:37:41.97:
[15936]: --> [7:CONNECT] oct 25 08:37:43.75: [15936]: --> [7:CONNECT] oct 25
08:37:44.19: [15936]: --> [2:OK] oct 25 08:37:44.19: [15936]: <--
[9:AT+FTS=7\r] oct 25 08:37:44.29: [15936]: --> [2:OK] oct 25 08:37:44.29:
[15936]: <-- [10:AT+FTM=72\r] oct 25 08:37:44.35: [15936]: --> [7:CONNECT]
oct 25 08:37:46.31: [15936]: --> [2:OK] oct 25 08:37:46.31: [15936]: <--
[9:AT+FRH=3\r] oct 25 08:37:47.66: [15936]: --> [7:CONNECT] oct 25
08:37:48.58: [15936]: --> [2:OK] oct 25 08:37:48.58: [15936]: TRAINING
succeeded oct 25 08:37:48.58: [15936]: DELAY 200 ms oct 25 08:37:48.78:
[15936]: <-- [10:AT+FTM=72\r] oct 25 08:37:48.84: [15936]: --> [7:CONNECT]
oct 25 08:37:48.84: [15936]: SEND begin page oct 25 08:37:58.82: [15936]:
SENT 20576 bytes of data oct 25 08:38:05.02: [15936]: SENT 10696 bytes of
data oct 25 08:38:05.03: [15936]: SEND 2D RTC oct 25 08:38:05.03: [15936]:
SEND end page oct 25 08:38:18.88: [15936]: --> [2:] oct 25 08:38:18.90:
[15936]: --> [2:OK] oct 25 08:38:18.90: [15936]: <-- [9:AT+FTS=7\r] oct 25
08:38:18.99: [15936]: --> [2:OK] oct 25 08:38:18.99: [15936]: SEND send MPS
(more pages, same document) oct 25 08:38:18.99: [15936]: <-- [9:AT+FTH=3\r]
oct 25 08:38:19.05: [15936]: --> [7:CONNECT] oct 25 08:38:20.36: [15936]:
--> [2:OK] oct 25 08:38:20.36: [15936]: <-- [9:AT+FRH=3\r] oct 25
08:38:23.08: [15936]: --> [7:CONNECT] oct 25 08:38:24.03: [15936]: -->
[2:OK] oct 25 08:38:24.03: [15936]: SEND recv RTN (retrain negative) oct 25
08:38:24.03: [15936]: SEND training at v.27ter 4800 bit/s oct 25
08:38:24.03: [15936]: <-- [9:AT+FTH=3\r] oct 25 08:38:24.10: [15936]: -->
[7:CONNECT] oct 25 08:38:25.87: [15936]: --> [7:CONNECT] oct 25 08:38:26.31:
[15936]: --> [2:OK] oct 25 08:38:26.31: [15936]: <-- [9:AT+FTS=7\r] oct 25
08:38:26.41: [15936]: --> [2:OK] oct 25 08:38:26.41: [15936]: <--
[10:AT+FTM=48\r] oct 25 08:38:26.49: [15936]: --> [7:CONNECT] oct 25
08:38:28.97: [15936]: --> [2:OK] oct 25 08:38:28.97: [15936]: <--
[9:AT+FRH=3\r] oct 25 08:38:30.26: [15936]: --> [7:CONNECT] oct 25
08:38:31.19: [15936]: --> [2:OK] oct 25 08:38:31.19: [15936]: TRAINING
succeeded oct 25 08:38:31.19: [15936]: DELAY 200 ms oct 25 08:38:31.39:
[15936]: <-- [10:AT+FTM=48\r] oct 25 08:38:31.44: [15936]: --> [7:CONNECT]
oct 25 08:38:31.44: [15936]: SEND begin page oct 25 08:38:37.81: [15936]:
SENT 13735 bytes of data oct 25 08:38:45.83: [15936]: SENT 13732 bytes of
data oct 25 08:38:45.83: [15936]: SENT 1047 bytes of data oct 25
08:38:45.83: [15936]: SEND 2D RTC oct 25 08:38:45.83: [15936]: SEND end page
oct 25 08:39:07.20: [15936]: --> [2:] oct 25 08:39:07.20: [15936]: -->
[2:OK] oct 25 08:39:07.20: [15936]: <-- [9:AT+FTS=7\r] oct 25 08:39:07.36:
[15936]: --> [2:OK] oct 25 08:39:07.36: [15936]: SEND send MPS (more pages,
same document) oct 25 08:39:07.36: [15936]: <-- [9:AT+FTH=3\r] oct 25
08:39:07.48: [15936]: --> [7:CONNECT] oct 25 08:39:08.83: [15936]: -->
[2:OK] oct 25 08:39:08.83: [15936]: <-- [9:AT+FRH=3\r] oct 25 08:39:11.46:
[15936]: --> [7:CONNECT] oct 25 08:39:12.36: [15936]: --> [2:OK] oct 25
08:39:12.36: [15936]: SEND recv RTN (retrain negative) oct 25 08:39:12.36:
[15936]: Unable to transmit page (giving up after 3
attempts)
oct 25 08:39:12.38: [15936]: SEND: Unable to transmit page (giving up after
3 attempts); Giving up after 3 attempts to send same page
"docq/doc594.ps;40", dirnum 0 oct 25 08:39:12.38: [15936]: <--
[9:AT+FTH=3\r] oct 25 08:39:12.44: [15936]: --> [7:CONNECT] oct 25
08:39:13.75: [15936]: --> [2:OK] oct 25 08:39:13.75: [15936]: <-- [5:ATH0\r]
oct 25 08:39:14.52: [15936]: --> [2:OK] oct 25 08:39:14.52: [15936]: SESSION
END

    ---- Status du fax ----

   Destination: 02625972xx
Identifiant_travail: 597
Identifiant_groupe: 597
      Emetteur: toot
        E-mail: toto@xxxxxxxxxx
Identifiant demande: 000000782
   Envoyé par: 192.168.x.x
        Status: Unable to transmit page (giving up after 3 attempts); Giving
up after 3 attempts to send same page
     Enchanges: 3 (échanges avec le dispositif à distance)
         Appel: 0 (appels échoués consécutifs)
        Appels: 4 (total appels)
         Pages: 0 (pages transmisent)
   Total Pages: 3 (total pages transmisent)
      Attempts: 3 (attempts to send current page)
        Dirnum: 0 (directory of next page to send)

---------------------------------------------------

_________________________________
HILAIRE s.a. - Philippe MALADJIAN
205 rue Jean Voillot
69100 VILLEURBANNE
tél. : 04 72 1450 66
fax : 04 78 26 02 03
e-mail : pmaladjian@xxxxxxxxxx



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

Follow-Ups:
- [hylafax-users] RE : RE : Unable to transmit page (giving up after 3 attempts)
  - From: Philippe MALADJIAN

References:
- [hylafax-users] RE : Unable to transmit page (giving up after 3 attempts)
  - From: Philippe MALADJIAN

Prev by Date: Re: [hylafax-users] receiver gets squished faxes
Next by Date: [hylafax-users] hylafax poor quality
Previous by thread: [hylafax-users] RE : Unable to transmit page (giving up after 3 attempts)
Next by thread: [hylafax-users] RE : RE : Unable to transmit page (giving up after 3 attempts)
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services