Re: [hylafax-users] atx command and Eicon Diva 4BRI

[adriano ghezzi <adriano.ghezzi@xxxxxxxxx>]

not sure, now I can't test but think should be

atx= <n> with n the number you need

let me know if ok or tomorrow I'll test.

bye

ag.


2005/10/18, Carlo Farinella <carlo.farinella@xxxxxxxxxx>:
> Hi all,
>
> i've got a strange problem with my Eicon Diva 4BRI. When i try to send a
> fax the modem reply me with a busy signal, so after a small search i
> understand i need on of the atx commands...the problem is that the
> device don't understand this kind of command, and minicom confirm it,
> here's an example. Any ideas?
>
> atz
> OK
> at&e710
> OK
> atx3
> ERROR
> atx2
> ERROR
> atx1
> ERROR
> atx4
> ERROR
> atdt712
> BUSY
>
> I'm using a slackware 10.2 with kernel 2.4.31, Eicon Melware drivers
> with no capi support). Tha device can receive fax perfectly, but can't send.
> Thanks in advance.
>
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
>
>

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*