Re: [hylafax-users] Atx command and Eicon Diva Server 4BRI

[Bodo Meissner <bodo@xxxxxxxxx>]

Am 2005.10.18 11:29 schrieb(en) Carlo Farinella:
> Hi all,
>
> i've got a strange problem with my Eicon Diva Server 4BRI. When i try  
> to send a fax the modem reply me with a busy signal, so after a small  
> search i understand i need one of the atx commands (atx3 i  
> think)...the problem is that the device don't understand this kind of  
> command, and minicom confirm it, here's an example. Any ideas?

Hello Carlo,

I don't think the ATX* commands are useful with an ISDN line. The  
"modem" does not listen to signals like dialtone or busy tone. Instead  
it will get all information in digital form.

Maybe there is something wrong with the ISDN line or your PBX  
configuration.

If your Eicon software does not have a logging or debug option I  
suggest you use isdnlog to see what's going on when hylafax tries to  
dial out.


Bodo

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*