[hylafax-users] AW: Sending 2 concurrent jobs

["Ullrich, Stefan" <info@xxxxxxxx>]

Hi Bodo,

Yes, I configured 2 virt. modem setup´s. But this didn´t work either.
The second job is always waiting. Here is one of my config files:

SpoolDir:               /var/spool/fax
FaxRcvdCmd:			/var/spool/fax/bin/faxrcvd
PollRcvdCmd:            /var/spool/fax/bin/pollrcvd
FaxReceiveUser:         fax
FaxReceiveGroup:        dialout
LogFile:                /var/log/fax/capifax.log
LogTraceLevel:          2
LogFileMode:            0600
{
    HylafaxDeviceName:          faxCAPILine1
    RecvFileMode:               0600
    FAXNumber:                  +49.xxxx.xxxxxx
    LocalIdentifier:            "Header for XXX"
    MaxConcurrentRecvs:         2
    OutgoingController:         1
    OutgoingMSN:                1
    SuppressMSN:                1
    NumberPrefix:               
    UseISDNFaxService:          0
    RingingDuration:            0
    {
        Controller:             1
        AcceptSpeech:           1
        UseDDI:                 0
        DDIOffset:              "12345"
        DDILength:              3
        IncomingDDIs:           
        IncomingMSNs:           1
        AcceptGlobalCall:       0
    }
    {
        Controller:             1
        AcceptSpeech:           1
        UseDDI:                 0
        DDIOffset:              "12345"
        DDILength:              3
        IncomingDDIs:           
        IncomingMSNs:           1
        AcceptGlobalCall:       1
    }
}

The second config file is nearly the same, only the
    HylafaxDeviceName:          faxCAPILine2
    RecvFileMode:               0600
    FAXNumber:                  +49.yyy.yyyyyy
    LocalIdentifier:            "Header for YYY"
Is different, and of course the filename ;-).
Both modems are correctly displayed in faxstat.

I read, the for using the 2nd b-channel I have to add the second part
    {
        Controller:             1
        AcceptSpeech:           1
        UseDDI:                 0
        DDIOffset:              "12345"
        DDILength:              3
        IncomingDDIs:           
        IncomingMSNs:           1
        AcceptGlobalCall:       1
    }
So I did it, but without success.
At the moment, we are using the server only for outbound connections, there are no
inbound connections, to there are no MSNs defined.

Stefan

-----Ursprüngliche Nachricht-----
Von: hylafax-users-bounce@xxxxxxxxxxx [mailto:hylafax-users-bounce@xxxxxxxxxxx] Im Auftrag von Bodo Meissner
Gesendet: Donnerstag, 6. Oktober 2005 23:34
An: hylafax-users@xxxxxxxxxxx
Betreff: Re: [hylafax-users] Sending 2 concurrent jobs

Am 2005.10.06 23:24 schrieb(en) Ullrich, Stefan:

> I have a hylafax server (4.2.0) and I want to be able to send 2 
> concurrent jobs. I have a AVN ISDN card. At the moment the last 
> received job stays in the queue until the first job is done.

Hello Stefan,

did you configure two "modems" in config.faxCAPI and tell Hylafax about these modems?
Did you use different phone numbers for the two fax jobs?


Bodo

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*