|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] error: Problem reading document directory
libtiff errors are directed to the TIFFError function, and so that would
need to be worked in to the code here to see what's going on.
You're probably the third person in the last month that's reported this
same problem. As 4.2.1 has been widely used for much, much longer than
that, and as libtiff-3.5.7 has been around yet even longer, I would tend
to believe that we're not looking at a problem with either of those two
packages.
In the thousands upon thousands of faxes that I have overseen being sent
from HylaFAX from versions 4.1beta1 through 4.2.2 I have never seen this
problem occur.
My guess, then, is that something else is going on perhaps a common
problem with some other package in the distribution? Search the
archives to see if maybe those other posters were using the same distro
as you. Maybe the distribution's libtiff build is bad. (?)
Lee.
Keith Paulson wrote:
Oh, I am running a class1 modem, using hylafax-4.2.1-1rh3 and
libtiff-3.5.7-13
Applicable code in hylafax seems to be faxd/Class1Send.c++, line 404
if (!TIFFReadDirectory(tif)) {
emsg = "Problem reading document directory";
but the error code from TIFFReadDirectory is not saved, so we cannot
tell what went wrong, can we?
Keith
Keith Paulson wrote:
I have had hylafax running now for one week; 1100 faxes sent, and
gotten this failure twice. In the last case, the first two pages
were sent, but the third failed.
The document in question had a cover sheet (1 page), followed by a 2
page PS document.
Any idea where to look (or what to look for)?
Keith
End of Log:
Sep 22 17:06:45.35: [17470]: SEND send PPS (partial page signal)
Sep 22 17:06:45.35: [17470]: SEND send MPS (more pages, same document)
Sep 22 17:06:45.35: [17470]: <-- [9:AT+FRH=3\r]
Sep 22 17:06:45.70: [17470]: --> [7:CONNECT]
Sep 22 17:06:46.76: [17470]: --> HDLC<5:FF C8 31 45 8F>
Sep 22 17:06:46.76: [17470]: --> [2:OK]
Sep 22 17:06:46.76: [17470]: SEND recv MCF (message confirmation)
Sep 22 17:06:46.76: [17470]: <-- [9:AT+FRS=7\r]
Sep 22 17:06:46.87: [17470]: --> [2:OK]
Sep 22 17:06:46.87: [17470]: SEND end page
Sep 22 17:06:46.87: [17470]: SEND FAX (000001029): FROM
root@xxxxxxxxxxxxxxxx TO 18883455575 (page 2 of 3 sent in 0:25)
Sep 22 17:06:46.87: [17470]: SEND FAX (000001029): FROM
root@xxxxxxxxxxxxxxxx TO 18883455575 (page 3 of 3 sent in 0:00)
Sep 22 17:06:46.87: [17470]: Problem reading document directory
Sep 22 17:06:46.87: [17470]: <-- [9:AT+FTH=3\r]
Sep 22 17:06:47.08: [17470]: --> [7:CONNECT]
Sep 22 17:06:47.08: [17470]: <-- HDLC<3:FF C8 DF>
Sep 22 17:06:48.25: [17470]: --> [2:OK]
Sep 22 17:06:48.25: [17470]: MODEM input buffering enabled
Sep 22 17:06:48.25: [17470]: <-- [5:ATH0\r]
Sep 22 17:06:48.49: [17470]: --> [2:OK]
Sep 22 17:06:48.49: [17470]: MODEM set DTR OFF
Sep 22 17:06:48.49: [17470]: SESSION END
--
This email may contain information that is privileged, confidential or
otherwise protected from disclosure under applicable law. If the
reader of
this message is not the intended recipient, you are hereby notified
that any
review, dissemination, distribution, or copying of this communication or
attachments herein is strictly prohibited. If you have received this
communication in error, please reply to this email notifying the
sender of
the error.
____________________ HylaFAX(tm) Users Mailing List
_______________________
To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
/dev/null
*To learn about expensive HylaFAX(tm) support, mail sales@xxxxxxxxx*
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
