|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] AT+FRH=3 -> ERROR
booger@xxxxxxxxxxx wrote:
wrz 16 10:19:55.91: [ 4634]: REMOTE TSI "041 366 00 82"
wrz 16 10:19:55.92: [ 4634]: <-- [9:AT+FRH=3\r]
wrz 16 10:19:55.95: [ 4634]: --> [7:CONNECT]
wrz 16 10:19:56.27: [ 4634]: --> [2:OK]
wrz 16 10:19:56.27: [ 4634]: REMOTE wants 4800 bit/s
wrz 16 10:19:56.27: [ 4634]: REMOTE wants A4 page width (215 mm)
wrz 16 10:19:56.28: [ 4634]: REMOTE wants unlimited page length
wrz 16 10:19:56.28: [ 4634]: REMOTE wants 3.85 line/mm
wrz 16 10:19:56.28: [ 4634]: REMOTE wants 1-D MH
wrz 16 10:19:56.28: [ 4634]: RECV training at v.27ter 4800 bit/s
It's pretty sad that the sender wants to start things off at 4800 bps...
wrz 16 10:19:56.28: [ 4634]: <-- [10:AT+FRM=48\r]
wrz 16 10:20:00.77: [ 4634]: --> [0:]
But then the modem cannot detect the sender's V.27ter carrier...
wrz 16 10:20:00.77: [ 4634]: MODEM <Empty line>
wrz 16 10:20:00.77: [ 4634]: <-- data [1]
wrz 16 10:20:00.97: [ 4634]: MODEM <Timeout>
And the modem does not abort properly...
wrz 16 10:20:00.97: [ 4634]: DELAY 75 ms
wrz 16 10:20:01.05: [ 4634]: <-- [9:AT+FTH=3\r]
wrz 16 10:20:08.24: [ 4634]: --> [7:CONNECT]
wrz 16 10:20:08.24: [ 4634]: <-- data [3]
wrz 16 10:20:08.24: [ 4634]: <-- data [2]
wrz 16 10:20:08.60: [ 4634]: --> [0:]
wrz 16 10:20:08.60: [ 4634]: MODEM <Empty line>
And the modem has other problems...
wrz 16 10:20:08.60: [ 4634]: TRAINING failed
wrz 16 10:20:08.61: [ 4634]: <-- [9:AT+FRH=3\r]
wrz 16 10:20:09.74: [ 4634]: --> [2:OK]
And more problems.
See that you're using the latest Linuxant driver. If you are, then
maybe you should report these modem misbehaviors to them.
Lee.
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
