Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] hylafax-4.2.0-1rh7 on RH 7.3 9 + USR Courier 56k



Shaun McCullagh wrote:

Hi,

From time to time we have send FAXes to a system which does not respond with a FAX carrier tone immediately after answering.

There is a 10 second delay before the remote fax sends a carrier signal..

At the moment our Hylafax system cannot send faxes to this particular remote fax because of this delay.

Is there a parameter I can tweek in config.ttyS1 to make HylaFax wait 10 seconds before deciding to retry?


Add commas to this destination's dialstring so that the dial will look like this:

ATDT5551212,,,,,

Each comma is normally 2 seconds, so 5 commas should give you 10 seconds more time.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services