Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Mainpine Quatro+ not picking up in Hylafax



John Meuser wrote:

Ah.. that would explain things.. it has assigned the interfaces to
completely new TTY's.... :

meuserj@s-uhsfax1 ~$ dmesg | grep tty
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS14 at I/O 0xec00 (irq = 185) is a 16550A
ttyS15 at I/O 0xec08 (irq = 185) is a 16550A
ttyS44 at I/O 0xec10 (irq = 185) is a 16550A
ttyS45 at I/O 0xec18 (irq = 185) is a 16550A
ttyS1 at I/O 0xec78 (irq = 185) is a 16450

So, I reconfigured it using the new TTY's.. and it still doesn't work.
It does exactly what it did with kernel 2.4.. I can send faxes, but it
won't pick up the call when I try to send to it.


I have a system with a Duo+ (and two external serial modems and two internal ISA modems) running kernel 2.6.7. I have the serial driver compiled as a module. During init (in /etc/rc.serial) I have:


 modprobe 8250
 setserial /dev/ttyS4 port 0xec00 irq 12 autoconfig ^fourport
 setserial /dev/ttyS5 port 0xec08 irq 12 autoconfig ^fourport

When I do 'dmesg | grep tty' I get:

 ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
 ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
 ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
 ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A

These are not the ports from the Duo+. However setserial on each device reports:

 /dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4
 /dev/ttyS1, UART: 16550A, Port: 0x02f8, IRQ: 3
 /dev/ttyS2, UART: 16550A, Port: 0x03e8, IRQ: 4
 /dev/ttyS3, UART: 16550A, Port: 0x02e8, IRQ: 3
 /dev/ttyS4, UART: 16550A, Port: 0xec00, IRQ: 12
 /dev/ttyS5, UART: 16550A, Port: 0xec08, IRQ: 12

And all of the modems run just fine.

I was seeing dmesg output like you are seeing and things didn't work right. I don't know what the problem was, but in order to get rid of that messy (using "high" tty numbers) dmesg output I decided to not compile-in the serial driver into the kernel, but to use it as a module instead. And after doing that I didn't see the problems any more.

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services