[hylafax-users] Send program terminated abnormally with exit status 0x4

Hello List,

I am running hylafax 4.2.1 on a SuSe 9.0. I am getting an error when trying to send a fax I am including the logs. I am getting this error trying to fax back to the server. But I have also tried sending to a fax machine and get the same problem

Server Log

Jun 24 11:53:29 goldfxsvr FaxQueuer[12339]: JOB 6350: Send program terminated abnormally with exit status 0x4

Jun 24 11:53:29 goldfxsvr FaxQueuer[12339]: NOTIFY: bin/notify "doneq/q6350" "failed" "0:49"

Jun 24 11:53:30 goldfxsvr FaxQueuer[12339]: NOTIFY exit status: 0 (26127)

Sending Log

Jun 24 11:52:53.88: [26112]: SESSION BEGIN 000000432 1xxxxxxxxxx

Jun 24 11:52:53.88: [26112]: HylaFAX (tm) Version 4.2.1

Jun 24 11:52:53.88: [26112]: SEND FAX: JOB 6350 DEST xxxxxxxxxx COMMID 000000432 DEVICE '/dev/ttyS1'

Jun 24 11:52:53.88: [26112]: STATE CHANGE: RUNNING -> SENDING

Jun 24 11:52:53.88: [26112]: MODEM input buffering enabled

Jun 24 11:52:53.88: [26112]: <-- [12:AT+FCLASS=1\r]

Jun 24 11:52:54.12: [26112]: --> [2:OK]

Jun 24 11:52:54.12: [26112]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled

Jun 24 11:52:54.12: [26112]: DIAL 3032771431

Jun 24 11:52:54.12: [26112]: <-- [18:ATX3DT,3032771431\r]

Jun 24 11:53:19.61: [26112]: --> [7:CONNECT]

Jun 24 11:53:19.61: [26112]: MODEM input buffering disabled

Jun 24 11:53:21.38: [26112]: --> HDLC<34:FF C0 04 AD 00 55 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 4C 74 8C B1 17>

Jun 24 11:53:21.38: [26112]: --> [2:OK]

Jun 24 11:53:21.38: [26112]: REMOTE NSF "B5 00 AA 48 79 6C 61 46 41 58 20 28 74 6D 29 20 56 65 72 73 69 6F 6E 20 34 2E 32 2E 31"

Jun 24 11:53:21.38: [26112]: NSF remote fax equipment: HylaFAX

Jun 24 11:53:21.38: [26112]: NSF remote station ID: "HylaFAX (tm) Version 4.2.1"

Jun 24 11:53:21.38: [26112]: <-- [9:AT+FRH=3\r]

Jun 24 11:53:21.40: [26112]: --> [7:CONNECT]

Jun 24 11:53:22.10: [26112]: --> HDLC<25:FF C0 02 0C B4 76 A6 26 36 F6 E2 B4 A6 66 96 36 96 26 A6 B2 04 04 04 C2 5C>

Jun 24 11:53:22.10: [26112]: --> [2:OK]

Jun 24 11:53:22.10: [26112]: REMOTE CSI "Medilife-Golden-0"

Jun 24 11:53:22.10: [26112]: <-- [9:AT+FRH=3\r]

Jun 24 11:53:22.12: [26112]: --> [7:CONNECT]

Jun 24 11:53:22.50: [26112]: --> HDLC<12:FF C8 01 00 76 5F 23 01 FB C0 C8 E6>

Jun 24 11:53:22.50: [26112]: --> [2:OK]

Jun 24 11:53:22.50: [26112]: REMOTE best rate 14400 bit/s

Jun 24 11:53:22.50: [26112]: REMOTE max A3 page width (303 mm)

Jun 24 11:53:22.50: [26112]: REMOTE max unlimited page length

Jun 24 11:53:22.50: [26112]: REMOTE best vres R16 x 15.4 line/mm

Jun 24 11:53:22.50: [26112]: REMOTE best format 2-D MMR

Jun 24 11:53:22.50: [26112]: REMOTE supports T.30 Annex A, 256-byte ECM

Jun 24 11:53:22.50: [26112]: REMOTE best 0 ms/scanline

Jun 24 11:53:22.50: [26112]: USE 14400 bit/s

Jun 24 11:53:22.50: [26112]: USE error correction mode

Jun 24 11:53:22.50: [26112]: USE 0 ms/scanline

Jun 24 11:53:22.50: [26112]: SEND file "docq/doc6349.tif;c1"

Jun 24 11:53:22.50: [26112]: USE A4 page width (215 mm)

Jun 24 11:53:22.50: [26112]: USE unlimited page length

Jun 24 11:53:22.50: [26112]: USE 7.7 line/mm

Jun 24 11:53:22.50: [26112]: USE 2-D MMR

Jun 24 11:53:22.50: [26112]: SEND training at v.17 14400 bit/s

Jun 24 11:53:22.50: [26112]: <-- [9:AT+FTH=3\r]

Jun 24 11:53:22.70: [26112]: --> [7:CONNECT]

Jun 24 11:53:22.70: [26112]: <-- HDLC<23:FF C0 C2 8C B4 76 A6 26 36 F6 E2 04 B4 A6 66 96 32 96 26 A6 B2 04 04>

Jun 24 11:53:22.70: [26112]: <-- data [23]

Jun 24 11:53:22.70: [26112]: <-- data [2]

Jun 24 11:53:22.72: [26112]: --> [7:CONNECT]

Jun 24 11:53:22.72: [26112]: <-- HDLC<7:FF C8 C1 00 46 1F 22>

Jun 24 11:53:22.72: [26112]: <-- data [7]

Jun 24 11:53:22.72: [26112]: <-- data [2]

Jun 24 11:53:24.70: [26112]: --> [2:OK]

Jun 24 11:53:24.70: [26112]: <-- [9:AT+FTS=7\r]

Jun 24 11:53:24.78: [26112]: --> [2:OK]

Jun 24 11:53:24.78: [26112]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled

Jun 24 11:53:24.78: [26112]: <-- [11:AT+FTM=145\r]

Jun 24 11:53:26.26: [26112]: --> [7:CONNECT]

Jun 24 11:53:26.26: [26112]: <-- data [1024]

Jun 24 11:53:26.26: [26112]: <-- data [652]

Jun 24 11:53:26.26: [26112]: <-- data [2]

Jun 24 11:53:27.79: [26112]: --> [2:OK]

Jun 24 11:53:27.79: [26112]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled

Jun 24 11:53:27.79: [26112]: <-- [9:AT+FRS=1\r]

Jun 24 11:53:27.81: [26112]: --> [2:OK]

Jun 24 11:53:27.81: [26112]: <-- [9:AT+FRH=3\r]

Jun 24 11:53:28.31: [26112]: --> [7:CONNECT]

Jun 24 11:53:29.33: [26112]: --> HDLC<5:FF C8 21 57 BE>

Jun 24 11:53:29.33: [26112]: --> [2:OK]

Jun 24 11:53:29.33: [26112]: TRAINING succeeded

Jun 24 11:53:29.33: [26112]: SEND begin page

Receiving log.

Jun 24 11:53:13.98: [ 1812]: SESSION BEGIN 000000434 13032771431

Jun 24 11:53:13.98: [ 1812]: HylaFAX (tm) Version 4.2.1

Jun 24 11:53:13.98: [ 1812]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled

Jun 24 11:53:13.98: [ 1812]: <-- [13:AT+FCLASS=1A\r]

Jun 24 11:53:19.52: [ 1812]: --> [7:CONNECT]

Jun 24 11:53:19.52: [ 1812]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0'

Jun 24 11:53:19.52: [ 1812]: STATE CHANGE: ANSWERING -> RECEIVING

Jun 24 11:53:19.52: [ 1812]: MODEM input buffering enabled

Jun 24 11:53:19.52: [ 1812]: RECV FAX: begin

Jun 24 11:53:19.52: [ 1812]: MODEM input buffering disabled

Jun 24 11:53:19.52: [ 1812]: <-- HDLC<32:FF C0 04 AD 00 55 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 4C 74 8C>

Jun 24 11:53:19.52: [ 1812]: <-- data [32]

Jun 24 11:53:19.52: [ 1812]: <-- data [2]

Jun 24 11:53:19.59: [ 1812]: --> [7:CONNECT]

Jun 24 11:53:19.59: [ 1812]: <-- HDLC<23:FF C0 02 0C B4 76 A6 26 36 F6 E2 B4 A6 66 96 36 96 26 A6 B2 04 04 04>

Jun 24 11:53:19.59: [ 1812]: <-- data [23]

Jun 24 11:53:19.59: [ 1812]: <-- data [2]

Jun 24 11:53:20.31: [ 1812]: --> [7:CONNECT]

Jun 24 11:53:20.31: [ 1812]: <-- HDLC<10:FF C8 01 00 76 5F 23 01 FB C0>

Jun 24 11:53:20.31: [ 1812]: <-- data [10]

Jun 24 11:53:20.31: [ 1812]: <-- data [2]

Jun 24 11:53:22.49: [ 1812]: --> [2:OK]

Jun 24 11:53:22.49: [ 1812]: <-- [9:AT+FRH=3\r]

Jun 24 11:53:23.05: [ 1812]: --> [7:CONNECT]

Jun 24 11:53:24.42: [ 1812]: --> HDLC<25:FF C0 C2 8C B4 76 A6 26 36 F6 E2 04 B4 A6 66 96 32 96 26 A6 B2 04 04 C7 F0>

Jun 24 11:53:24.42: [ 1812]: --> [2:OK]

Jun 24 11:53:24.42: [ 1812]: REMOTE TSI "MediLife- Golden-1"

Jun 24 11:53:24.42: [ 1812]: <-- [9:AT+FRH=3\r]

Jun 24 11:53:24.43: [ 1812]: --> [7:CONNECT]

Jun 24 11:53:24.71: [ 1812]: --> HDLC<9:FF C8 C1 00 46 1F 22 39 BB>

Jun 24 11:53:24.71: [ 1812]: --> [2:OK]

Jun 24 11:53:24.71: [ 1812]: REMOTE wants 14400 bit/s

Jun 24 11:53:24.71: [ 1812]: REMOTE wants A4 page width (215 mm)

Jun 24 11:53:24.71: [ 1812]: REMOTE wants unlimited page length

Jun 24 11:53:24.71: [ 1812]: REMOTE wants 7.7 line/mm

Jun 24 11:53:24.71: [ 1812]: REMOTE wants 2-D MMR

Jun 24 11:53:24.71: [ 1812]: REMOTE wants T.30 Annex A, 256-byte ECM

Jun 24 11:53:24.71: [ 1812]: RECV training at v.17 14400 bit/s

Jun 24 11:53:24.71: [ 1812]: MODEM set XON/XOFF/DRAIN: input ignored, output generated

Jun 24 11:53:24.71: [ 1812]: <-- [11:AT+FRM=145\r]

Jun 24 11:53:26.30: [ 1812]: --> [7:CONNECT]

Jun 24 11:53:27.86: [ 1812]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled

Jun 24 11:53:27.86: [ 1812]: RECV: TCF 2813 bytes, 3% non-zero, 2699 zero-run

Jun 24 11:53:27.86: [ 1812]: --> [10:NO CARRIER]

Jun 24 11:53:27.86: [ 1812]: DELAY 75 ms

Jun 24 11:53:27.94: [ 1812]: TRAINING succeeded

Jun 24 11:53:27.94: [ 1812]: <-- [9:AT+FTH=3\r]

Jun 24 11:53:28.14: [ 1812]: --> [7:CONNECT]

Jun 24 11:53:28.14: [ 1812]: <-- HDLC<3:FF C8 21>

Jun 24 11:53:28.14: [ 1812]: <-- data [3]

Jun 24 11:53:28.14: [ 1812]: <-- data [2]

Jun 24 11:53:29.31: [ 1812]: --> [2:OK]

Jun 24 11:53:29.31: [ 1812]: MODEM input buffering enabled

Jun 24 11:53:29.31: [ 1812]: MODEM set XON/XOFF/FLUSH: input ignored, output generated

Jun 24 11:53:29.31: [ 1812]: <-- [11:AT+FRM=146\r]

Jun 24 11:53:36.31: [ 1812]: MODEM TIMEOUT: reading line from modem

Jun 24 11:53:36.31: [ 1812]: <-- data [1]

Jun 24 11:53:36.42: [ 1812]: --> [2:OK]

Jun 24 11:53:36.42: [ 1812]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled

Jun 24 11:53:36.42: [ 1812]: MODEM input buffering disabled

Jun 24 11:53:36.42: [ 1812]: <-- [9:AT+FRS=7\r]

Jun 24 11:53:36.52: [ 1812]: --> [2:OK]

Jun 24 11:53:36.53: [ 1812]: RECV FAX (000000434): from MediLife- Golden-1, page 1 in 0:09, INF, 7.7 line/mm, 2-D MMR, 14400 bit/s

Jun 24 11:53:36.53: [ 1812]: RECV FAX (000000434): recvq/fax000000277.tif from MediLife- Golden-1, route to <unspecified>, 1 pages in 0:17

Jun 24 11:53:36.53: [ 1812]: RECV FAX: Failed to properly detect high-speed data carrier.

Jun 24 11:53:36.53: [ 1812]: <-- [9:AT+FTH=3\r]

Jun 24 11:53:36.57: [ 1812]: --> [7:CONNECT]

Jun 24 11:53:36.57: [ 1812]: <-- HDLC<3:FF C8 5F>

Jun 24 11:53:36.57: [ 1812]: <-- data [3]

Jun 24 11:53:36.57: [ 1812]: <-- data [2]

Jun 24 11:53:37.74: [ 1812]: --> [2:OK]

Jun 24 11:53:37.74: [ 1812]: MODEM input buffering enabled

Jun 24 11:53:37.74: [ 1812]: RECV FAX (000000434): session with MediLife- Golden-1 terminated abnormally: Failed to properly detect high-speed data carrier.

Jun 24 11:53:37.74: [ 1812]: RECV FAX: bin/faxrcvd "recvq/fax000000277.tif" "ttyS0" "000000434" "Failed to properly detect high-speed data carrier." "" ""

Jun 24 11:53:37.75: [ 1812]: RECV FAX: end

Jun 24 11:53:37.75: [ 1812]: SESSION END

Thanks

Brent