Hi Ferenc
Short answer: yes
Longer answer: Hylafax can be set up so that it archives the Postscript
documents shortly after sending them (or after giving up), along with all
protocol files about the specific transmission.
-rw-r--r-- 1 uucp uucp 1227 May 9 13:30 c000001242
-rw-r--r-- 1 uucp uucp 1227 May 9 13:30 c000001243
-rw-r--r-- 1 uucp uucp 1227 May 9 13:30 c000001244
-rw-r--r-- 1 uucp uucp 1227 May 9 13:30 c000001246
-rw-r--r-- 1 uucp uucp 1227 May 9 13:30 c000001250
-rw-r--r-- 1 uucp uucp 1227 May 9 13:30 c000001253
-rw-r--r-- 1 uucp uucp 1227 May 9 13:30 c000001258
-rw-r--r-- 1 uucp uucp 1227 May 9 13:30 c000001260
-rw-r--r-- 1 uucp uucp 1227 May 9 13:30 c000001261
-rw-r--r-- 1 uucp uucp 1227 May 9 13:30 c000001262
-rw-r--r-- 1 uucp uucp 1227 May 9 13:30 c000001263
-rw-r--r-- 1 uucp uucp 1345 May 9 13:30 c000001264
-rw-r----- 1 uucp uucp 170578 May 9 13:30 doc1129.ps
-rw-rw---- 1 uucp 60002 824 May 9 13:06 q1129
This is the directory of one specific job, which had several dialling
attempts which you can see according to the amount of c0000* files.
One of these files might contain
May 09 13:06:57.01: [ 2366]: --> [10:NO CARRIER]
May 09 13:06:57.01: [ 2366]: SEND FAILED: JOB 1129 DEST 0434337505 ERR No
carrier detected
May 09 13:06:57.01: [ 2366]: SEND FAILED: JOB 1129 DEST 0434337505 ERR No
carrier detected; too many attempts to dial
May 09 13:06:57.01: [ 2366]: <-- [5:ATH0\r]
May 09 13:06:57.14: [ 2366]: --> [2:OK]
May 09 13:06:57.14: [ 2366]: SESSION END
Finally the q-file will contain information like these:
tts:1115636817
killtime:1115643833
retrytime:0
state:8
npages:0
totpages:2
ntries:0
ndials:12
totdials:12
maxdials:12
tottries:0
maxtries:3
pagewidth:209
resolution:196
pagelength:296
priority:127
(...)
In addition, there is an xferfaxlog file which lists all jobs along with the
number and the success or fail status.
The only thing hylafax doesn't provide is an efficient tool for dealing with
this data. I had to write a script which reads a very precise part of the
postscript file (the topic of the fax) and intermixes it with the xferfaxlog
file so that I can easily query if a customer is calling. I just have to
grep my modified xferfaxlog for their order number and I have the full
history of attempts, followed by the effective send. And if I need to see
what they should have received, I can open up the postscript file.
Greetings,
Erich
-----Original Message-----
From: Medgyessy, Ferenc (Budapest) [mailto:Ferenc.Medgyessy@xxxxxxx]
Sent: Monday, May 09, 2005 12:46 PM
To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] Can Hylafax archive old fax messages sent?
Hi,
Before we install Hylafax I ask you to inform me about an important
utility of this fax program.
Our point of view to find a "clever" sw, which can save all fax messages
sent with acknowledgement report. (It is important to demonstrate that our
company sent this and this fax in past, when a customer questions about.)
Can Hylafax do it?
Best regards,
Ferenc
The information in this email and any attachments is confidential and
intended solely for the use of the individual(s) to whom it is addressed
or otherwise directed. If you are not a named addressee or otherwise an
intended recipient, you are requested to immediately notify the sender
and to delete the email and all attachments from your system.
Visit http://www.sgs.com
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
