[hylafax-users] "Cannot get multiport config: Invalid argument" when configuring mainpine rockforce octo+ modem

["Chris Giesel" <cgiesel@xxxxxxxxxx>]

All:

I am having difficulty installing my mainpine rockforce octo+ and
configuring Fedora kernel 2.6.5-1.358.i386 serial ports/ttyS latches. I have
the following information:

We have recompiled the fedora core 2 kernel with the options for multiport
serial devices enabled as suggested earlier.

We ran the setserial command:
setserial /dev/ttyS14 port 0xdc80 irq 9 autoconfig ^fourport substituting
apropriate io addresses and ttyS where apropriate

we are still getting "Cannot get multiport config: Invalid argument" after
running  setserial /dev/ttyS14 set_multiport port1 0xdce0 mask1 0xFF match1
00x00

lspci /sbin/lspci -d 1522:*
02:0b.0 Modem: MainPine Ltd PCI <-> IOBus Bridge (rev 32)
/sbin/lspci -d 1522:*                                       02:0b.0 Modem:
MainPine Ltd PCI <-> IOBus Bridge (rev 32)

[root@Comms01Fax root]# /sbin/lspci -nvs 02:0b.0
02:0b.0 Class 0703: 1522:0100 (rev 32)
        Subsystem: 1522:1d00
        Flags: medium devsel, IRQ 9
        I/O ports at dc80
        Memory at faf00000 (32-bit, non-prefetchable) [size=1M]

dmesg indicates the following:

Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
PCI: Found IRQ 9 for device 0000:02:0b.0
PCI: Sharing IRQ 9 with 0000:01:00.0
ttyS14 at I/O 0xdc80 (irq = 9) is a 16550A
ttyS15 at I/O 0xdc88 (irq = 9) is a 16550A
ttyS44 at I/O 0xdc90 (irq = 9) is a 16550A
ttyS45 at I/O 0xdc98 (irq = 9) is a 16550A
ttyS46 at I/O 0xdca0 (irq = 9) is a 16550A
ttyS47 at I/O 0xdca8 (irq = 9) is a 16550A
ttyS2 at I/O 0xdcb0 (irq = 9) is a 16550A
ttyS3 at I/O 0xdcb8 (irq = 9) is a 16550A
ttyS4 at I/O 0xdcf8 (irq = 9) is a 16450

the following is a list of the ports  that showed up in our system:

/dev/ttyS14, Line 14, UART: 16550A, Port: 0xdc80, IRQ: 2
        Baud_base: 115200, close_delay: 41248, divisor: 0
        closing_wait: 50048
        Flags: spd_normal skip_test

/dev/ttyS15, Line 15, UART: 16550A, Port: 0xdc88, IRQ: 2
        Baud_base: 115200, close_delay: 500, divisor: 0
        closing_wait: 30000
        Flags: spd_normal skip_test

/dev/ttyS16, Line 16, UART: unknown, Port: 0xdc90, IRQ: 2
        Baud_base: 115200, close_delay: 50000, divisor: 0
        closing_wait: 50880
        Flags: spd_normal

/dev/ttyS17, Line 17, UART: unknown, Port: 0xdc98, IRQ: 2
        Baud_base: 115200, close_delay: 50000, divisor: 0
        closing_wait: 50880
        Flags: spd_normal

/dev/ttyS18, Line 18, UART: unknown, Port: 0xdca0, IRQ: 2
        Baud_base: 115200, close_delay: 50000, divisor: 0
        closing_wait: 50880
        Flags: spd_normal

/dev/ttyS19, Line 19, UART: unknown, Port: 0xdca8, IRQ: 2
        Baud_base: 115200, close_delay: 50000, divisor: 0
        closing_wait: 50880
        Flags: spd_normal

/dev/ttyS2, Line 2, UART: 16550A, Port: 0xdcb0, IRQ: 2
        Baud_base: 115200, close_delay: 500, divisor: 0
        closing_wait: 30000
        Flags: spd_normal skip_test

/dev/ttyS3, Line 3, UART: 16550A, Port: 0xdcb8, IRQ: 2
        Baud_base: 115200, close_delay: 500, divisor: 0
        closing_wait: 30000
        Flags: spd_normal skip_test

/dev/ttyS4, Line 4, UART: 16450, Port: 0xdcf8, IRQ: 2
        Baud_base: 115200, close_delay: 61568, divisor: 0
        closing_wait: 24064
        Flags: spd_normal skip_test


Any help would be appreciated.

Thanks,

Chris


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*