|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] E1/T1 cards from digium and HylaFAX
"Miroslav Zubcic" <mvz@xxxxxxxxxx> wrote:
Hi everyone!
After searching the web, greping documentation and reading this list,
I cannot find definitive answer for my dilema: Does any of this E1/T1
cards work with HylaFAX?
Miroslav,
Those boards, when used with Asterisk, will help you deliver a T1 to HylaFAX
but they don't have any fax capability themselves. You'd need a fax board
with an E1 interface, such as a Brooktrout TR1034 or an Eicon Diva Server
E1/PRI board. I'm not aware if Digi/Patton make an E1 board, but they might.
Unless you decide to go the route of using t.38 to 'virtualize' those 30
channels (would require a t.38 capable gateway), or you think SpanDSP is
good enough for you (in which case you don't use HylaFAX at all) then you're
looking at board-based faxing, and you'll need a fax board for that.
-Darren
--
Darren Nickerson
Senior Sales & Support Engineer
iFAX Solutions, Inc. www.ifax.com
darren.nickerson@xxxxxxxx
+1.215.438.4638 x8106
+1.215.243.8335 (fax)
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
