Re: [hylafax-users] DID diva server, Hylafax 4.21

[Lach Dunlop <lach@xxxxxxxx>]

I have attached my config.ttyds01 file.

The problem seems to be with the

ModemResetCmds:         AT#CID=5

In my prior install this setting would pass back the CID NUMBER:  and 
DAD:

Now with the modem reset command in place all I get is a busy signal.  
When I comment out the ModemResetCmds:  the faxes are received, just 
not routed by DID.

THanks

Lach

# $Id: eicon-2,v 1.2 2004/03/05 02:29:32 lhoward Exp $
#
# prototype config file for the Eicon Diva ISDN Modem
#

#
#
CountryCode:            1
AreaCode:               651
FAXNumber:              +1.999.555.1212
LongDistancePrefix:     1
InternationalPrefix:    011
DialStringRules:        etc/dialrules
ServerTracing:          1
SessionTracing:         11
RecvFileMode:           0600
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      1
SpeakerVolume:          off
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        "NothingSetup"
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:           25
#
#

ModemType:              Class2
ModemRate:              57600   # on boards supporting V.34-fax,
                                # this may need to be 57600
ModemFlowControl:       rtscts
ModemNoFlowCmd:         AT&K0
ModemSoftFlowCmd:       AT&K4
ModemHardFlowCmd:       AT&K3

Class2APQueryCmd:       none
Class2SPLCmd:           none
Class2TBCCmd:           none
Class2ECMType:          2.0     # follows Class 2.0 spec, not Class 2
#ModemResetCmds:                AT#CID=5

CIDNumber:              "DAD: "





On Mar 14, 2005, at 9:32 PM, Lach Dunlop wrote:

> Hello,
>
> I had a configuration working just wonderfully.... Unitl today.
>
> It was a diva Server 6.0 on Suse Linux 8.1 and Hylafax 4.1.5
>
> Today it died and all I got was abusy tone.  I took the opportunity to 
> upgrade to Suse 8.2 and Diva 7.5 and Hylafax 4.2.1.
>
> I am receiving faxes but I am getting no DID info :((  So all my fax 
> routing is broken.
>
> When I do a faxaddmodem it senses the modems (/dev/ttyds0?) as CLASS1 
> modems.  In my old config they where CLASS 2.
>
> Is there something I am missing?  I really need my DID back.
>
> Thanks
>
> Lachh
>
>
> ____________________ HylaFAX(tm) Users Mailing List 
> _______________________
>  To subscribe/unsubscribe, click 
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < 
> /dev/null
>  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*