I'm currently testing HylaFax 4.2.1 under Solaris 9 (self-compiled) and Debian GNU/Linux 3.1 with two identical modem : Kortex Novafax 56000 Vocal + V90.
They are configured in Class 1 mode on both machine.
When I send a fax from Linux to Solaris, it's working fine.
When I send a fax from Solaris to Linux, it failed with error "Failed to properly detect high-speed data carrier".
When I send a fax from Solaris to anywhere it's working great. When a I send a fax from Linux to anywhere it's working great too !
I think my problem is comming from receving fax under Linux.
Here is the log :
Could not open recvq/fax000000008.tif; either not TIFF or corrupted.
ReceivedOn: ttyS1
The full document was not received because:
Failed to properly detect high-speed data carrier.
---- Transcript of session follows ----
Mar 02 16:43:53.10: [ 1041]: SESSION BEGIN 000000019 33388657676
Mar 02 16:43:53.10: [ 1041]: HylaFAX (tm) Version 4.2.1
Mar 02 16:43:53.10: [ 1041]: <-- [4:ATA\r]
Mar 02 16:43:59.21: [ 1041]: --> [7:CONNECT]
Mar 02 16:43:59.21: [ 1041]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS1'
Mar 02 16:43:59.21: [ 1041]: RECV FAX: begin
Mar 02 16:44:01.14: [ 1041]: --> [7:CONNECT]
Mar 02 16:44:01.97: [ 1041]: --> [7:CONNECT]
Mar 02 16:44:02.54: [ 1041]: --> [2:OK]
Mar 02 16:44:02.54: [ 1041]: <-- [9:AT+FRH=3\r]
Mar 02 16:44:02.93: [ 1041]: --> [7:CONNECT]
Mar 02 16:44:04.28: [ 1041]: --> [2:OK]
Mar 02 16:44:04.28: [ 1041]: REMOTE TSI "0388657676"
Mar 02 16:44:04.28: [ 1041]: <-- [9:AT+FRH=3\r]
Mar 02 16:44:04.30: [ 1041]: --> [7:CONNECT]
Mar 02 16:44:04.68: [ 1041]: --> [2:OK]
Mar 02 16:44:04.68: [ 1041]: REMOTE wants 14400 bit/s
Mar 02 16:44:04.68: [ 1041]: REMOTE wants A4 page width (215 mm)
Mar 02 16:44:04.68: [ 1041]: REMOTE wants unlimited page length
Mar 02 16:44:04.68: [ 1041]: REMOTE wants 3.85 line/mm
Mar 02 16:44:04.68: [ 1041]: REMOTE wants 2-D MMR
Mar 02 16:44:04.68: [ 1041]: REMOTE wants T.30 Annex A, 256-byte ECM
Mar 02 16:44:04.68: [ 1041]: RECV training at v.17 14400 bit/s
Mar 02 16:44:04.68: [ 1041]: <-- [11:AT+FRM=145\r]
Mar 02 16:44:06.47: [ 1041]: --> [7:CONNECT]
Mar 02 16:44:08.02: [ 1041]: RECV: TCF 2739 bytes, 1% non-zero, 2700 zero-run
Mar 02 16:44:08.02: [ 1041]: --> [10:NO CARRIER]
Mar 02 16:44:08.02: [ 1041]: DELAY 75 ms
Mar 02 16:44:08.10: [ 1041]: TRAINING succeeded
Mar 02 16:44:08.10: [ 1041]: <-- [9:AT+FTH=3\r]
Mar 02 16:44:08.15: [ 1041]: --> [7:CONNECT]
Mar 02 16:44:09.47: [ 1041]: --> [2:OK]
Mar 02 16:44:09.47: [ 1041]: <-- [11:AT+FRM=146\r]
Mar 02 16:44:16.58: [ 1041]: --> [2:OK]
Mar 02 16:44:16.58: [ 1041]: <-- [9:AT+FRS=7\r]
Mar 02 16:44:16.71: [ 1041]: --> [2:OK]
Mar 02 16:44:16.72: [ 1041]: RECV FAX: Failed to properly detect high-speed data carrier.
Mar 02 16:44:16.72: [ 1041]: <-- [9:AT+FTH=3\r]
Mar 02 16:44:16.72: [ 1041]: RECV FAX (000000019): from 0388657676, page 1 in 0:08, INF, 3.85 line/mm, 2-D MMR, 14400 bit/s
Mar 02 16:44:16.73: [ 1041]: RECV FAX (000000019): recvq/fax000000008.tif from 0388657676, route to <unspecified>, 1 pages in 0:17
Mar 02 16:44:16.77: [ 1041]: --> [7:CONNECT]
Mar 02 16:44:18.09: [ 1041]: --> [2:OK]
Mar 02 16:44:18.09: [ 1041]: RECV FAX (000000019): session with 0388657676 terminated abnormally: Failed to properly detect high-speed data carrier.
Mar 02 16:44:18.09: [ 1041]: RECV FAX: bin/faxrcvd "recvq/fax000000008.tif" "ttyS1" "000000019" "Failed to properly detect high-speed data carrier." "" ""
Mar 02 16:44:18.11: [ 1041]: RECV FAX: end
Mar 02 16:44:18.12: [ 1041]: SESSION END
--
| EISELE Pascal | Direct : +33 (0)3 88 65 76 78 |
| Administrateur systèmes & réseaux | Tél : +33 (0)3 88 65 04 04 |
| 13b rue du Maréchal Lefebvre | Fax : +33 (0)3 88 65 76 76 |
| 67100 Strasbourg | http://www.appligos.fr |
