Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Failed to properly detect high-speed data carrier



Lee Howard wrote:
On 2005.02.03 12:58 John Kosta wrote:

All,

I am sorry to post this problem to the list. I am getting the error "Failed to properly detect high-speed data carrier" with a just purchased Multitech MT5600ZDXV after also receiving the error with a

-- Lots of great information snipped --


--> CONNECT

So, anyway, if your line tests and fixes that way don't result in any improvements, let me know, and we'll try to see how we can better work the matter.

Lee.



All,

I just wanted to follow up on this thread and thank Lee and everyone else for their help, advise and technical information.

We have finally completed our line tests and are now faxing with an extremely high success rate.

It turns out our fax lines are going through our PBX. Our phone vendor came out and "realigned the T1 to the PRI." That was done several days ago, and we have not had a single bad fax since then, in 300+. So, I don't know if that really even means anything :), but whatever they did, Hylafax is cranking.

--John


____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services