Re: [hylafax-users] Is DID required for this application?

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

On 2005.02.23 09:05 "Donald, Adam" wrote:

> I added:
>   ModemRingResponse:     AT+FCLASS=8;H1
>   CallIDPattern:         SHIELDED_DTMF
>   CallIDAnswerLength:    4
>   ModemAnswerCmd:        AT+FCLASS=1;A
> restarted the faxgetty process for the modem, and that seemed to work!

It's good to know that some things work out of the box.  :-)  Some 
people have needed to add a <delay:100> at the beginning of the 
ModemAnswerCmd.

> However, faxes are taking a lot longer to receive because the modem on
> which I added the "SHIELDED_DTMF" option to is receiving many
> "Bad HDLC terminating flag received." errors.  If I remove the DTMF
> lines and restart the faxgetty process, the HDLC errors disappear, and
> I receive without errors again.

That is very strange.

> I am using a Multitech MT5634ZPX-PCI-V92 to both send and receive for
> log below on 4.2.1 on FC3.
> Thank you again, Lee, for all of your help!

> Feb 23 10:42:06.55: [ 7299]: <-- [11:AT+FRM=146\r]
> Feb 23 10:42:07.14: [ 7299]: --> [7:CONNECT]
> Feb 23 10:42:07.21: [ 7299]: Bad HDLC terminating flag received.
> Feb 23 10:42:07.21: [ 7299]: Bad HDLC terminating flag received.
> Feb 23 10:42:07.28: [ 7299]: Bad HDLC terminating flag received.

I need to see what these are.  Please set:

  TracingMask: 0x11
  SessionTracing: 0xFFF

in your modem config file, restart faxgetty, retry the fax, and send me 
the log as an attachment.

Thanks.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*