[hylafax-users] MultiTech MT5634ZPX-PCI-V92

["Hans Strickler" <hss@xxxxxxxxxxxxxxxxxxxxxxx>]

Since putting in the MultiTech MT5634ZPX-PCI-V92 modems we have been getting a spike in

“Failed to properly detect high-speed data carrier” errors.

 

I will turn on

TracingMask : 0x11

Session Tracing: 0xFFF

 

To look @ errors better, however, if there is one out there that works better, it’d be a great help.

 

 

#

# prototype config for Lucent LT Winmodem using ltmodem.o driver,

# as well as many other Lucent chipset modems.

# (They work well with all default Class 1 configs.)

#

 

#

CountryCode:                1

AreaCode:                     406

FAXNumber:                  585-****

LongDistancePrefix:       1

InternationalPrefix:         011

DialStringRules: etc/dialrules

ServerTracing:                1

SessionTracing:             11

RecvFileMode:               0644

LogFileMode:                 0644

DeviceMode:                  0644

RingsBeforeAnswer:       2

SpeakerVolume:                        off

GettyArgs:                    "-h %l dx_%s"

LocalIdentifier:   FRONTLINE

ClocalAsRoot:               no

PriorityScheduling:         yes

TagLineFont:                 etc/lutRS18.pcf

TagLineFormat:              "From %%l|%c|Page %%P of %%T"

PercentGoodLines:        0

MaxConsecutiveBadLines:          0

MaxRecvPages:             150

#

 

ModemType:                 Class1              # use this to supply a hint

ModemFlowControl:       rtscts                # many firmwares have broken software flow control

Class1TCFRecvHack:     yes                   # avoid +FCERROR before TCF

# Class1MsgRecvHackCmd:       AT+FRS=1        # avoid +FCERROR before image

Class1TMConnectDelay:            400                   # counteract quick CONNECT response

 

# If your line supports Caller-ID, you may want to uncomment this...

# QualifyCID:                 etc/cid              # you must create this file

# ModemResetCmds:     AT+VCID=1

# CIDNumber:                "NMBR="

# CIDName:                   "NAME="

 

# Or with the MT5634ZBA-DID you'll probably need something like...

# ModemReadyCmds:    AT*DS1*DD0*DF1*DN4  # enable DTMF-DID, wink-start, 4 digits

# CIDNumber:                "DTMF"             # format of AT*DF1

# CIDNumberAnswerLength:       4          # four DTMF-DID digits then ATA

 

 

 

 

 

Hans Strickler

www.frontlineprocessing.com

676 Ferguson Ave. Suite 5

Bozeman, Mt. 59718

866*651*3068

406*585*7576 (Fax)

 

--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.8.8 - Release Date: 2/14/2005

# $Id: lucent,v 1.19 2004/06/01 21:34:39 lhoward Exp $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics, Inc.
# 
# Permission to use, copy, modify, distribute, and sell this software and 
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the names of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
# 
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, 
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY 
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  
# 
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF 
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 
# OF THIS SOFTWARE.
#

#
# prototype config for Lucent LT Winmodem using ltmodem.o driver,
# as well as many other Lucent chipset modems.
# (They work well with all default Class 1 configs.)
#

#
CountryCode:		1
AreaCode:		406
FAXNumber:		585-7576
LongDistancePrefix:	1
InternationalPrefix:	011
DialStringRules:	etc/dialrules
ServerTracing:		1
SessionTracing:		11
RecvFileMode:		0644
LogFileMode:		0644
DeviceMode:		0644
RingsBeforeAnswer:	2
SpeakerVolume:		off
GettyArgs:		"-h %l dx_%s"
LocalIdentifier:	FRONTLINE
ClocalAsRoot:		no
PriorityScheduling:	yes
TagLineFont:		etc/lutRS18.pcf
TagLineFormat:		"From %%l|%c|Page %%P of %%T"
PercentGoodLines:	0
MaxConsecutiveBadLines:	0
MaxRecvPages:		150
#

ModemType:		Class1		# use this to supply a hint
ModemFlowControl:	rtscts		# many firmwares have broken software flow control
Class1TCFRecvHack:	yes		# avoid +FCERROR before TCF
# Class1MsgRecvHackCmd:	AT+FRS=1	# avoid +FCERROR before image
Class1TMConnectDelay:	400		# counteract quick CONNECT response

# If your line supports Caller-ID, you may want to uncomment this...
# QualifyCID:		etc/cid		# you must create this file
# ModemResetCmds:	AT+VCID=1
# CIDNumber:		"NMBR="
# CIDName:		"NAME="

# Or with the MT5634ZBA-DID you'll probably need something like...
# ModemReadyCmds:	AT*DS1*DD0*DF1*DN4	# enable DTMF-DID, wink-start, 4 digits
# CIDNumber:		"DTMF"		# format of AT*DF1
# CIDNumberAnswerLength:	4	# four DTMF-DID digits then ATA