Re: [hylafax-users] capi4hylafax mISDN

[Kimble Young <kimble@xxxxxxxxxxxxxxx>]

Anabela,

Last time I checked MISDN did not support fax.

The problem is that it would need to be implemented in software (unless 
the hardware supports it) and no one is prepared to undertake such a 
complicated project.

You'll need to use one of the active cards from Eicon and AVM or the 
passive AVM Fritz to get fax working.

Regards,

Kimble Young

anabela abreu wrote:
> Hello,
> has any one put to work a ISDN card with fedora core 3, kernel 2.6.9, 
> with capi4hylafax?
> Because i install mISDN source on my kernel, and capi4k-utils, and i 
> compile the kernel with the fowlling options:
> Device Drivers  --->
>  ISDN subsystem  --->
>  [*] ISDN support
>  „  „            Old ISDN4Linux  
> --->                                      „  „ 
>  „  „      ---   CAPI 
> subsystem                                            „  „ 
>  „  „      <M>   CAPI2.0 
> support                                           „  „ 
>  „  „      [*]     Verbose reason code reporting (kernel size 
> +=7K)        „  „ 
>  „  „      [*]     CAPI2.0 Middleware support 
> (EXPERIMENTAL)               „  „ 
>  „  „      <M>     CAPI2.0 /dev/capi 
> support                               „  „ 
>  „  „      [*]       CAPI2.0 filesystem 
> support                            „  „ 
>  „  „      ---     CAPI hardware 
> drivers                                   „  „ 
>  „  „              Active AVM cards  
> --->                                  „  „ 
>  „  „              Active Eicon DIVA Server cards  
> --->                    „  „ 
>  „  „              Modular ISDN driver  --->
>
>  Modular ISDN driver  --->
>  <M> Support modular ISDN driver                                         
> „  „ 
>  „  „         [*]   Enable memory leak debug for 
> mISDN                     „  „ 
>  „  „         [*]   Support for AVM 
> Fritz!Cards                            „  „ 
>  „  „         [ ]   Support for HFC PCI 
> cards                              „  „ 
>  „  „         [ ]   Support for Sedlbauer 
> Speedfax+                        „  „ 
>  „  „         [*]   Support for Winbond 6692 based 
> cards                   „  „ 
>  „  „         [ ]   Digital Audio Processing of transparent data
>
> and a install capi4hylafax, but i can send any fax with c2faxsend, 
> because an error occurs:
> Connection dropped with Reason 0x3001 (B1 protocol not supported)  and 
> fax device is not created
>
> capiinfo returns:
> Number of Controllers : 1
> Controller 1:
> Manufacturer: mISDN CAPI controller W6692_1
> CAPI Version: 2.0
> Manufacturer Version: 1.0
> Serial Number: 0002
> BChannels: 2
> Global Options: 0x0000001f
>   internal controller supported
>   external equipment supported
>   handset supported
>   DTMF supported
>   Supplementary Services supported
> B1 protocols support: 0x00000003
>   64 kbit/s with HDLC framing
>   64 kbit/s bit-transparent operation
> B2 protocols support: 0x00000043
>   ISO 7776 (X.75 SLP)
>   Transparent
>   Transparent (ignoring framing errors of B1 protocol)
> B3 protocols support: 0x00000005
>   Transparent
>   ISO 8208 (X.25 DTE-DTE)
>
>  0100
>  0200
>  1f000000
>  03000000
>  43000000
>  05000000
>  00000000 00000000 00000000 00000000 00000000 00000000
>  00000000 00000000 00000000 00000000 00000000
>
> Supplementary services support: 0x00000012
>   Terminal Portability
>   Call Forwarding
> and my card is Winbond 6692
>
>
> I read that FAX is not (yet) possible with mISDN, is this true our is 
> there someone that figure this out.
> Thank?Ls
>
> _________________________________________________________________
> Chegou o que faltava: MSN Acesso Grátis. Instale Já! 
> http://www.msn.com.br/discador
>
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*