[hylafax-users] Failed to properly detect high-speed data carrier

Hi List!

I got this error message several times.

What’s this? How can I fix it??

The log:

Dec 29 14:40:09.99: [ 1611]: SESSION BEGIN 000003619 3614610452

Dec 29 14:40:09.99: [ 1611]: HylaFAX (tm) Version 4.2.0

Dec 29 14:40:09.99: [ 1611]: <-- [4:ATA\r]

Dec 29 14:40:16.77: [ 1611]: --> [7:CONNECT]

Dec 29 14:40:16.77: [ 1611]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0'

Dec 29 14:40:16.77: [ 1611]: sched policy=1, priority=1

Dec 29 14:40:16.77: [ 1611]: RECV FAX: begin

Dec 29 14:40:18.03: [ 1611]: --> [7:CONNECT]

Dec 29 14:40:19.05: [ 1611]: --> [7:CONNECT]

Dec 29 14:40:19.47: [ 1611]: --> [2:OK]

Dec 29 14:40:19.47: [ 1611]: <-- [9:AT+FRH=3\r]

Dec 29 14:40:19.76: [ 1611]: --> [7:CONNECT]

Dec 29 14:40:21.26: [ 1611]: --> [2:OK]

Dec 29 14:40:21.26: [ 1611]: REMOTE TSI "+36 1 269 5539"

Dec 29 14:40:21.26: [ 1611]: <-- [9:AT+FRH=3\r]

Dec 29 14:40:21.30: [ 1611]: --> [7:CONNECT]

Dec 29 14:40:21.53: [ 1611]: --> [2:OK]

Dec 29 14:40:21.53: [ 1611]: REMOTE wants 14400 bit/s

Dec 29 14:40:21.53: [ 1611]: REMOTE wants A4 page width (215 mm)

Dec 29 14:40:21.53: [ 1611]: REMOTE wants unlimited page length

Dec 29 14:40:21.53: [ 1611]: REMOTE wants 7.7 line/mm

Dec 29 14:40:21.53: [ 1611]: REMOTE wants 2-D MMR

Dec 29 14:40:21.53: [ 1611]: REMOTE wants T.30 Annex A, 256-byte ECM

Dec 29 14:40:21.53: [ 1611]: RECV training at v.17 14400 bit/s

Dec 29 14:40:21.53: [ 1611]: <-- [11:AT+FRM=145\r]

Dec 29 14:40:23.22: [ 1611]: --> [7:CONNECT]

Dec 29 14:40:24.73: [ 1611]: RECV: TCF 2771 bytes, 0% non-zero, 2697 zero-run

Dec 29 14:40:24.74: [ 1611]: --> [10:NO CARRIER]

Dec 29 14:40:24.74: [ 1611]: DELAY 75 ms

Dec 29 14:40:24.81: [ 1611]: TRAINING succeeded

Dec 29 14:40:24.81: [ 1611]: <-- [9:AT+FTH=3\r]

Dec 29 14:40:25.95: [ 1611]: --> [7:CONNECT]

Dec 29 14:40:26.16: [ 1611]: --> [2:OK]

Dec 29 14:40:26.16: [ 1611]: <-- [11:AT+FRM=146\r]

Dec 29 14:40:28.30: [ 1611]: --> [7:CONNECT]

Dec 29 14:40:31.90: [ 1611]: Timeout awaiting synchronization sequence

Dec 29 14:40:31.90: [ 1611]: <-- [11:AT+FRM=146\r]

Dec 29 14:40:32.02: [ 1611]: --> [2:OK]

Dec 29 14:40:32.02: [ 1611]: RECV FAX (000003619): from +36 1 269 5539, page 1 in 0:08, INF, 7.7 line/mm, 2-D MMR, 14400 bit/s

Dec 29 14:40:32.02: [ 1611]: RECV FAX (000003619): recvq/fax000002407.tif from +36 1 269 5539, route to <unspecified>, 1 pages in 0:16

Dec 29 14:40:32.02: [ 1611]: RECV FAX: Failed to properly detect high-speed data carrier.

Dec 29 14:40:32.02: [ 1611]: <-- [9:AT+FTH=3\r]

Dec 29 14:40:33.15: [ 1611]: --> [7:CONNECT]

Dec 29 14:40:33.39: [ 1611]: --> [2:OK]

Dec 29 14:40:33.39: [ 1611]: RECV FAX (000003619): session with +36 1 269 5539 terminated abnormally: Failed to properly detect high-speed data carrier.

Dec 29 14:40:33.39: [ 1611]: RECV FAX: bin/faxrcvd "recvq/fax000002407.tif" "ttyS0" "000003619" "Failed to properly detect high-speed data carrier." "" ""

Dec 29 14:40:33.40: [ 1611]: sched policy=0, priority=0

Dec 29 14:40:33.40: [ 1611]: sched policy=1, priority=1

Dec 29 14:40:33.40: [ 1611]: RECV FAX: end

Dec 29 14:40:33.40: [ 1611]: SESSION END

The tif file exist, but it’s size is 302 bytes.

Thx, Balázs