Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Sending problem in hylafax-Help Needed
On Sat, 25 Dec 2004 05:48:13 +0000 (GMT), biny ks <ksbiny2002@xxxxxxxxxxx>
wrote:
>which I send are receiving there partially.Some middle
>lines are missing from each page.
>
> I am using hylafax-4.1.8-24.2 on suse 9.1.
> The modem is a class 1 modem.
>Dec 22 15:10:34.05: [24001]: DELAY 100 ms
>Dec 22 15:10:34.15: [24001]: <-- [12:AT+FCLASS=1\r]
>Dec 22 15:10:34.26: [24001]: --> [2:OK]
>Dec 22 15:10:34.26: [24001]: DELAY 100 ms
>Dec 22 15:10:34.36: [24001]: <-- [7:ATL0M1\r]
>Dec 22 15:10:34.46: [24001]: --> [2:OK]
>Dec 22 15:10:34.46: [24001]: STATE CHANGE: RUNNING ->
>SENDING
>Dec 22 15:11:21.77: [24001]: --> [2:OK]
>Dec 22 15:11:21.77: [24001]: SEND recv MCF (message
>confirmation)
1) The receiver acknowledged the fax was received OK, so for HylaFAX all is
ok.
2) You could try upgrading to 4.2.0 which will support ECM that usually
helps with problems of some random missing line; without ECM some missing
line may be considered "normal" if phone line is not perfectly clear.
3) Why you added a delay of 100ms after every command? Unless you have a
special reason for it, comment it out.
--
giulioo@xxxxxxxxx
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*